Search results

...capability to remotely hard or soft reset, but we can always power off the board manually if need be. | # || VFAT <br/> pin # || Name || Value || Test rig color <br/> Primary/Second <br/> (

...Breakout Board that the ISU LDS team designed; thirdly, the VFAT Breakout Board itself employs several noise cancellation techniques in its design and layo ==VFAT Breakout Board Design==

Parameters for the operation of the VFAT board are downloaded to the chip using the I2C protocol. ...t has a [http://gumstix.com/store/catalog/product_info.php?products_id=184 breakout-vx] card to allow access to the I2C signals, serial ports, and various othe

| 2/25/10 || Stuff V4 Breakout Box |3/23/10 || Working Breakout Box

...control computer, and an I/O VME module to record the LVDS output from the VFAT card. ...1495]]|| An FPGA to source the MCLK and Trig signals as well as record the VFAT LVDS output. An external clock is used to drive the MCLCK pulse.

==Inputs to breakout box== :VFAT:

==Inputs to breakout box== :VFAT:

...rotator in preparation for a few tests before the commissioning run. One VFAT card is mounted to the top of the detector so the impact of the high dose c ...at a sampling frequency of 40 MHz storing up to 128 triggered events. The VFAT card digitizes the analog output of the GEM detector to indicate the presen

...andles all of the receiving and transmitting functionality to and from the VFAT ICs, the FIFO storage, the PLL timing (if used), control of the LEDs on the ...the basic I/O functionality of the V1495 when one does not have access to VFAT chips for generating and capturing data packets.

...imator. There is at least a 3 inch gap between this bolt and the breakout board at the point of closest approach. A substantial amount of the bolt thread ...rovided by JLab. The V1495 was no longer able to recorded the output of 3 VFAT cards when we switched from our 4 foot long, shielded, flat ribbon cables

This tracks My Daily Progress developing the VFAT readout Spent some time reviewing the VFAT instruction manual

...unted on the TGEM test detectors. One TGEM test detector has the Thick PC board GEM foils which need much higher HV than the regular GEM foils. The second ...decoded according to the data structure described in Figure 8 and 9 of the VFAT manual.