Difference between revisions of "Cf252 runs with HPGe"

From New IAC Wiki
Jump to navigation Jump to search
Line 4: Line 4:
 
=12/29/16=
 
=12/29/16=
 
{| border="1" style="border-collapse: collapse; padding: 5px; text-align: center "
 
{| border="1" style="border-collapse: collapse; padding: 5px; text-align: center "
!Run # !! RunTime [sec] !! distance[cm] !! n flux <math>[n/cm^2]</math><br><math>=\frac{n_{rate}t}{4\pi d^2}</math> <br>([[Cf-252 rates table|<small>Cf252 rates</small>]]) || Integral <br>n flux <math>[n/cm^2]  </math> ||configuration || notes   
+
!Run # !! RunTime [sec] !! distance[cm] !! n flux <math>[n/cm^2]</math><br><math>=\frac{n_{rate}t}{4\pi d^2}</math> <br>([[Cf-252 rates table|<small>Cf252 rates</small>]]) || Integral <br>n flux <br> <math>[n/cm^2]  </math> ||configuration || notes   
 
|-
 
|-
| 5609 || 4060 ||  30  ||  6850 ||  6850 || Cf252. Coincidence between HPGe and timing PMT || ToF spectrum exists but is hectic. Problem may be that the TDC stop is determined by a widened timing PMT pulse in coinc. with a HPGe pulse,
+
| 5609 || 4060 ||  30  ||  6850 ||  6850 || Cf252 in. Coincidence between HPGe and timing PMT || ToF spectrum exists but is hectic. Problem may be that the TDC stop is determined by a widened timing PMT pulse in coinc with a HPGe pulse that has high timing jitter.
 
|-
 
|-
| none || 1250 ||  26  ||  2800 ||  9655 || Not taking data during this time.  
+
| none || 1250 ||  26  ||  2800 ||  9655 || Not taking data during this time. |
 
|-
 
|-
| 5611 || 2509 ||  30  ||  4230 ||  13885 ||  
+
| 5611 || 2509 ||  30  ||  4230 ||  13885 || Cf252 in. Coincidence between HPGe and timing PMT. TDC stop always 1200 ns after PMT timing pulse, otherwise same setup. 
 
|-
 
|-
 
|}
 
|}

Revision as of 04:18, 30 December 2016

go back


12/29/16

Run # RunTime [sec] distance[cm] n flux [math][n/cm^2][/math]
[math]=\frac{n_{rate}t}{4\pi d^2}[/math]
(Cf252 rates)
Integral
n flux
[math][n/cm^2] [/math]
configuration notes
5609 4060 30 6850 6850 Cf252 in. Coincidence between HPGe and timing PMT ToF spectrum exists but is hectic. Problem may be that the TDC stop is determined by a widened timing PMT pulse in coinc with a HPGe pulse that has high timing jitter.
none 1250 26 2800 9655
5611 2509 30 4230 13885 Cf252 in. Coincidence between HPGe and timing PMT. TDC stop always 1200 ns after PMT timing pulse, otherwise same setup.