2nCor Equipment

From New IAC Wiki
Revision as of 16:08, 24 March 2015 by Kosiolek (talk | contribs) (→‎TDC)
Jump to navigation Jump to search

Detectors

PMTs

http://www.hamamatsu.com/resources/pdf/etd/R580_TPMH1100E.pdf

Scintillators

e+e- spectrometer

DAQ electronics

Signal Processing

Discriminator

CAEN N841


The pulse forming stage of the discriminator produces an output pulse whose width is adjustable in a range from 5 ns to 40 ns. Each channel can work both in Updating and Non-Updating mode according to on-board jumpers position. The discriminator thresholds are individually settable in a range from -1 mV to -255 mV (1 mV step), via an 8-bit DAC. The minimum detectable signal is -5 mV. The back panel houses VETO and TEST inputs, the OR output and the Current Sum output, which generates a current proportional to the input multiplicity, i. e. to the number of channels over threshold, at a rate of -1.0 mA per hit (-50 mV per hit into a 50 Ohm load) ±20%.

File:CAEN N841 Manual.pdf

NIM-ECL converter

Phillips Model 726

File:Phillip 726 Nim2ECL.pdf

TDC

Detector name convention

BLUT = Beam Left Upstream Top pmt
TDC channel Map (Thursday)
Detector Angle TDC channel NIM-ECL channel Patch Pannel # ROOT vaiable
BLUT 135 TDC 16 in B ch 0 223A6 evt.TDC[16]
BLUB 135 TDC 17 in B ch 1 223A7 evt.TDC[17]
BRT 270 TDC 24 in A ch 0 223A14 evt.TDC[24]
BRB 270 TDC 25 in A ch 1 223A15 evt.TDC[25]
BLDT 45 TDC 26 in A ch 2 223A16 evt.TDC[26]
BLDB 45 TDC 27 in A ch 3 223A17 evt.TDC[27]
Trig Delay TDC 30 in A ch 6 evt.TDC[30]
Photon flux monitor 90 TDC 29 in A ch 5 223A10 evt.TDC[29]


TDC channel Map 3/24/15
Detector Angle TDC channel NIM-ECL channel Patch Pannel # ROOT vaiable
1 top (BRT) 270 24 in A ch 0 223A14 evt.TDC[24]
1 bottom (BRB) 270 25 in A ch 1 223A15 evt.TDC[25]
2 top BLDT 45 26 in A ch 2 223A16 evt.TDC[26]
2 bottom BLDB 45 27 in A ch 3 223A17 evt.TDC[27]
3 top 45 TDC 26 in A ch 2 223A16 evt.TDC[26]
3 bottom 45 TDC 27 in A ch 3 223A17 evt.TDC[27]
4 top BLUT 135 TDC 16 in B ch 0 223A6 evt.TDC[16]
4 bottom BLUB 135 TDC 17 in B ch 1 223A7 evt.TDC[17]
5 top 135 TDC 16 in B ch 0 223A6 evt.TDC[16]
5 bottom 135 TDC 17 in B ch 1 223A7 evt.TDC[17]
6 top 135 TDC 16 in B ch 0 223A6 evt.TDC[16]
6 bottom 135 TDC 17 in B ch 1 223A7 evt.TDC[17]
e+ spect TDC 30 in A ch 6 evt.TDC[30]
Trig Delay TDC 30 in A ch 6 evt.TDC[30]


TDC calibration

ADC

2nCor_44


Software

Ntuple maker

To make the Tree containing the TDC, QDC, and PDC data run the following command


source ~/CODA/setup
/home/daq/CODA/CODAreader/ROOT_V5.30/v775v792v785/evio2nt -fr8735.dat >/dev/null

rename the output file to a root file

mv r8735 r8735.root
root -l r8735.root

to draw a histogram for TDC channel 16

DAQ->Draw("evt.TDC[17]>>(4096,0,4096)");