Readout Controller Configuration: Difference between revisions

From New IAC Wiki
Jump to navigation Jump to search
← Older edit
Oborn (talk | contribs)
Bureaucrats, ldapadmin, Administrators, wikiadmin
47 edits
No edit summary
Foretony (talk | contribs)
18,402 edits
 
(54 intermediate revisions by 2 users not shown)
Line 1: Line 1:
MVME 6100 <br>
rocdaq1:134.50.3.17
ROC1 ethernet address: 0001AF1998B5<br>
rocdaq2:134.50.3.46
ROC1 ethernet address: 0001AF1998B6<br>
rocdaq3:134.50.3.33
MPC7457 RISC G4 processor (PPC family)<br>
==  Download files from JLAB ==


I downloaded the boot file and VXworks kernel from JLAB


/site/coda/kern/5.5/boot/boot6100_122.bin 
[[MVME_6100_ROC]]
/site/coda/kern/5.5/vx6100_v4.1


and put in /tftpboot subdirectory on Host computer


==Debug Connector ==
[[GE_XVB601_ROC]]


I then used the serial port on the host computer to interface with the MVME6100 via the "DEBUG" port.  The debug port took an RJ45 standard cable so I got and RJ45-DB9 converter.  This seemed to work out of the box.  Just in case I ever need to make my own connector record the pinouts below.
[[CODA_REMEX]]


=JLAbs GitHub repository for readout modules=


[http://www.slac.stanford.edu/grp/lcls/controls/global/standards/hardware/v6100a_ih.pdf Information below is Table 5-11 pg 92 of this reference]
I uploaded the subdirectory on daq2 using the following commands
{| border="1"
|  ROC Pin# || DB9 Pin # || DB9 shell || Signal 
|-
|  1      || 1        || Blue      || DCD (Carrier Detect)
|-
|  2      || 7        || Orange    || RTS (Request to Send)
|-
|  3      || 5        || Black    || GNDC
|-
|  4      || 3        || Red      || TX (Transmit)
|-
|  5      || 2        || Green    || RX (Recieve)
|-
|  6      || 5        || Yellow    || GNDC
|-
|  7      || 8        || Brown    || CTS (Clear to Send)
|-
|  8      || 4        || White    || DTR (Data Terminal Ready)
|}


== MVME6100 BOOT screen==
<pre>
cd CODA
git clone https://github.com/JeffersonLab/mkLinuxvmeDist.git
cd mkLinuxvmeDist
./getGIT
./getGIT -o
</pre>


Copyright Motorola Inc. 1999-2007, All Rights Reserved
MOTLoad RTOS Version 2.0,  PAL Version 2.1 RM02
Wed Feb  7 11:32:02 MST 2007


MPU-Type            =MPC74x7
the result is a subdirectory called "linxvme" which contains all the libraries
MPU-Int Clock Speed  =1266MHz
MPU-Ext Clock Speed  =133MHz
MPU-Int Cache(L2) Enabled, 512KB, L2CR =C0000000
MPU-Ext Cache(L3) Enabled, 2MB, 211MHz, L3CR =DC026000


PCI bus instance 0  =64 bit, 133 Mhz, PCI-X
PCI bus instance 1  =64 bit, PCI


Reset/Boot Vector    =Flash1
[[Data_Acquisition]]
 
Local Memory Found  =20000000 (&536870912)
User Download Buffer =006B7000:008B6FFF
 
 
== Basic commands==
 
=== setting the time===
 
The command below will print the help screen for the time set command
 
he set
 
for example
 
MVME6100> set -t082604163100
 
08 = Month<br>
26 = day<br>
04 = year<br>
16 = hour (24 hour clock)<br>
31 = min<br>
00 = seconds<br>
 
 
MVME6100> time
 
THU AUG 26 16:31:02.00 2004
 
=== Ping another computer to check network===
 
I was inable to ping unless I used the "LAN1" RJ45 etherenet port
 
 
MVME6100> ping -c134.50.3.216 -s134.50.3.210
Client (Source) IP Address      = 134.50.3.216
Server (Destination) IP Address = 134.50.3.210
Server/Host Found, E-Address    = 0030487A9468
170 (128+42) bytes from 134.50.3.210: icmp_seq=0 time=179 us
Packets Transmitted =1, Packets Received =1, Packets Lost =0 (0%)
Round-Trip Min/Avg/Max = 179/179/179 uS
 
=== show the flash memory===
 
MVME6100> flashShow
Device-Name  Base-Address,Size  Device-Size,Count  Boot  Type
/dev/flash0  F4000000,04000000  02000000,00000002  No    Intel 28F256
/dev/flash1  F8000000,04000000  02000000,00000002  Yes  Intel 28F256
 
 
=== Load in the VxWorks boot kernel ===
 
MVME6100> tftpGet -cCLIENT_IP_ADDRESS -sSERVER_IP_ADDRESS -fFILENAME
 
CLIENT_IP_ADDESS is the IP address of the computer receiving the file <br>
SERVER_IP_ADDRESS is the IP address of the computer hosting the file (by default tftp uses the subdirectory /tftpboot) <br>
 
 
MVME6100> tftpGet -c134.50.3.216 -s134.50.3.210 -fboot6100_122.bin
Network Loading from: /dev/enet0
Loading File: boot6100_122.bin
Load Address: 006B7000
Download Buffer Size = 00200000
 
Client IP Address      = 134.50.3.216
Server IP Address      = 134.50.3.210
Gateway IP Address    = 134.50.3.253
Subnet IP Address Mask = 255.255.255.0
 
Network File Load in Progress...
 
Bytes Received =&594768, Bytes Loaded =&594768
Bytes/Second  =&594768, Elapsed Time =1 Second(s)
 
=== Flash the RAM with the program===
 
>MVME6100>flashProgram -d/dev/flash0 -o03f00100 -nfff00
 
 
After flashing you flip dipswitch #2 on S4 fo off and powercycle
 
 
MVME6100> flashProgram -d/dev/flash0 -o03f00100 -nfff00
Source Starting/Ending Addresses      =006B7000/007B6EFF
Destination Starting/Ending Addresses =F7F00100/F7FFFFFF
Number of Effective Bytes            =000FFF00 (&1048320)
 
Program Flash Memory (Y/N)? Y
 
=== set BOOTA dip switch===<br>
I moved the dip switch on S4 labeled "BOOT A" to OFF
 
=== Error===
MVME6100> sysMotVpdInit: Unable to read Vital Product Data (VPD).
sysMotVpdInit: Unable to read Vital Product Data (VPD).
 
The above error results when the "Normal" dip switch on S4 is set to
"OFF"
 
 
=== The VxWorks Boot screen===
 
 
                            VxWorks System Boot
 
 
Copyright 1984-2002  Wind River Systems, Inc.
 
 
 
 
 
CPU: Motorola MVME6100-0163 - MPC 7457
Version: VxWorks5.5.1
BSP version: 1.2/2
Creation date: Feb  2 2007, 16:49:27
 
 
 
 
Press any key to stop auto-boot...
7
 
[VxWorks Boot]:

Latest revision as of 21:12, 15 November 2016

rocdaq1:134.50.3.17 rocdaq2:134.50.3.46 rocdaq3:134.50.3.33


MVME_6100_ROC


GE_XVB601_ROC

CODA_REMEX

JLAbs GitHub repository for readout modules

I uploaded the subdirectory on daq2 using the following commands 

cd CODA
git clone https://github.com/JeffersonLab/mkLinuxvmeDist.git
cd mkLinuxvmeDist
./getGIT
./getGIT -o


the result is a subdirectory called "linxvme" which contains all the libraries


Data_Acquisition

Retrieved from "https://wiki.iac.isu.edu/index.php?title=Readout_Controller_Configuration&oldid=110173"