Latest revision as of 21:12, 15 November 2016

rocdaq1:134.50.3.17 rocdaq2:134.50.3.46 rocdaq3:134.50.3.33

JLAbs GitHub repository for readout modules

I uploaded the subdirectory on daq2 using the following commands

cd CODA
git clone https://github.com/JeffersonLab/mkLinuxvmeDist.git
cd mkLinuxvmeDist
./getGIT
./getGIT -o

the result is a subdirectory called "linxvme" which contains all the libraries

Data_Acquisition

Difference between revisions of "Readout Controller Configuration"

Latest revision as of 21:12, 15 November 2016

JLAbs GitHub repository for readout modules

Navigation menu

Search

@@ Line 1: / Line 1: @@
-MVME 6100 <br>
+rocdaq1:134.50.3.17
-ROC1 ethernet address: 0001AF1998B5<br>
+rocdaq2:134.50.3.46
-ROC1 ethernet address: 0001AF1998B6<br>
+rocdaq3:134.50.3.33
-MPC7457 RISC G4 processor (PPC family)<br>
-==  Download files from JLAB ==
-I downloaded the boot file and VXworks kernel from JLAB
- /site/coda/kern/5.5/boot/boot6100_122.bin
+[[MVME_6100_ROC]]
- /site/coda/kern/5.5/vx6100_v4.1
-and put in /tftpboot subdirectory on Host computer
-==Debug Connector ==
+[[GE_XVB601_ROC]]
-I then used the serial port on the host computer to interface with the MVME6100 via the "DEBUG" port.  The debug port took an RJ45 standard cable so I got and RJ45-DB9 converter.  This seemed to work out of the box.  Just in case I ever need to make my own connector record the pinouts below.
+[[CODA_REMEX]]
+=JLAbs GitHub repository for readout modules=
-[http://www.slac.stanford.edu/grp/lcls/controls/global/standards/hardware/v6100a_ih.pdf Information below is Table 5-11 pg 92 of this reference]
+I uploaded the subdirectory on daq2 using the following commands
-{| border="1"
-|  ROC Pin# || DB9 Pin # || DB9 shell || Signal
-|-
-|   1       || 1         || Blue      || DCD (Carrier Detect)
-|-
-|   2       || 7         || Orange    || RTS (Request to Send)
-|-
-|   3       || 5         || Black     || GNDC
-|-
-|   4       || 3         || Red       || TX (Transmit)
-|-
-|   5       || 2         || Green     || RX (Recieve)
-|-
-|   6       || 5         || Yellow    || GNDC
-|-
-|   7       || 8         || Brown     || CTS (Clear to Send)
-|-
-|   8       || 4         || White     || DTR (Data Terminal Ready)
-|}
-== MVME6100 BOOT screen==
+ <pre>
+cd CODA
+git clone https://github.com/JeffersonLab/mkLinuxvmeDist.git
+cd mkLinuxvmeDist
+./getGIT
+./getGIT -o
+</pre>
- Copyright Motorola Inc. 1999-2007, All Rights Reserved
- MOTLoad RTOS Version 2.0,  PAL Version 2.1 RM02
- Wed Feb  7 11:32:02 MST 2007
- MPU-Type             =MPC74x7
+the result is a subdirectory called "linxvme" which contains all the libraries
- MPU-Int Clock Speed  =1266MHz
- MPU-Ext Clock Speed  =133MHz
- MPU-Int Cache(L2) Enabled, 512KB, L2CR =C0000000
- MPU-Ext Cache(L3) Enabled, 2MB, 211MHz, L3CR =DC026000
- PCI bus instance 0   =64 bit, 133 Mhz, PCI-X
- PCI bus instance 1   =64 bit, PCI
- Reset/Boot Vector    =Flash1
+[[Data_Acquisition]]
- Local Memory Found   =20000000 (&536870912)
- User Download Buffer =006B7000:008B6FFF
-== Basic commands==
-=== setting the time===
-The command below will print the help screen for the time set command
- he set
-for example
- MVME6100> set -t082604163100
-= Month<br>
-= day<br>
-= year<br>
-= hour (24 hour clock)<br>
-= min<br>
-= seconds<br>
- MVME6100> time
- THU AUG 26 16:31:02.00 2004
-=== Ping another computer to check network===
-I was unable to ping unless I used the "LAN1" RJ45 etherenet port
- MVME6100> ping -c134.50.3.216 -s134.50.3.210
- Client (Source) IP Address      = 134.50.3.216
- Server (Destination) IP Address = 134.50.3.210
- Server/Host Found, E-Address    = 0030487A9468
-(128+42) bytes from 134.50.3.210: icmp_seq=0 time=179 us
- Packets Transmitted =1, Packets Received =1, Packets Lost =0 (0%)
- Round-Trip Min/Avg/Max = 179/179/179 uS
-=== show the flash memory===
- MVME6100> flashShow
- Device-Name  Base-Address,Size  Device-Size,Count  Boot  Type
- /dev/flash0  F4000000,04000000  02000000,00000002  No    Intel 28F256
- /dev/flash1  F8000000,04000000  02000000,00000002  Yes   Intel 28F256
-=== Load in the VxWorks boot kernel ===
- MVME6100> tftpGet -cCLIENT_IP_ADDRESS -sSERVER_IP_ADDRESS -fFILENAME
-CLIENT_IP_ADDESS is the IP address of the computer receiving the file <br>
-SERVER_IP_ADDRESS is the IP address of the computer hosting the file (by default tftp uses the subdirectory /tftpboot) <br>
- MVME6100> tftpGet -c134.50.3.216 -s134.50.3.210 -fboot6100_122.bin
- Network Loading from: /dev/enet0
- Loading File: boot6100_122.bin
- Load Address: 006B7000
- Download Buffer Size = 00200000
- Client IP Address      = 134.50.3.216
- Server IP Address      = 134.50.3.210
- Gateway IP Address     = 134.50.3.253
- Subnet IP Address Mask = 255.255.255.0
- Network File Load in Progress...
- Bytes Received =&594768, Bytes Loaded =&594768
- Bytes/Second   =&594768, Elapsed Time =1 Second(s)
-=== Flash the RAM with the program===
- >MVME6100>flashProgram -d/dev/flash0 -o03f00100 -nfff00
- MVME6100> flashProgram -d/dev/flash0 -o03f00100 -nfff00
- Source Starting/Ending Addresses      =006B7000/007B6EFF
- Destination Starting/Ending Addresses =F7F00100/F7FFFFFF
- Number of Effective Bytes             =000FFF00 (&1048320)
- Program Flash Memory (Y/N)? Y
-=== set BOOTA dip switch===
-After flashing you flip dipswitch #2 on S4 fo off and powercycle
- I moved the dip switch on S4 labeled "BOOT A" to OFF
-=== Error===
-MVME6100> sysMotVpdInit: Unable to read Vital Product Data (VPD).
-sysMotVpdInit: Unable to read Vital Product Data (VPD).
-The above error results when the "Normal" dip switch on S4 is set to
-"OFF".  The S4 dipswitch are now set to
-{| border="1" cellpadding="4"
-|-
-|Pin|| Name ||Setting
-|-
-|1|| NORM ENV||on
-|-
-|2 ||BOOT A ||off
-|-
-|3|| WPA ||on
-|-
-|4 ||WPB ||off
-|}
-=== The VxWorks Boot screen===
-                            VxWorks System Boot
- Copyright 1984-2002  Wind River Systems, Inc.
- CPU: Motorola MVME6100-0163 - MPC 7457
- Version: VxWorks5.5.1
- BSP version: 1.2/2
- Creation date: Feb  2 2007, 16:49:27
- Press any key to stop auto-boot...
- [VxWorks Boot]:
-== Setting VxWorks Parameters==
-== view the boot parameters==
- [VxWorks Boot]: p
- boot device          : geisc
- unit number          : 0
- processor number     : 0
- host name            : host
- file name            : /tornado/mv6100/vxWorks
- inet on ethernet (e) : 90.0.0.2
- host inet (h)        : 90.0.0.1
- user (u)             : vxworks
- flags (f)            : 0x0
- [VxWorks Boot]:
-== set the boot parameters ==
-Typing a "p" will list out current boot parameters
- [VxWorks Boot]: p
- boot device          : geisc
- unit number          : 0
- processor number     : 0
- host name            : daq1
- file name            : /home/daq/CODA/VXWorks/vx6100_v4.1
- inet on ethernet (e) : 134.50.3.216
- inet on backplane (b): 0
- host inet (h)        : 134.50.3.210
- user (u)             : daq
- flags (f)            : 0x0
- target name (tn)     : roc1
- startup script (s)   : /home/daq/CODA/bootscripts/roc1.boot
- [VxWorks Boot]:
-Typing a "c" will CONFIGURE the boot parameters
- [VxWorks Boot]: c
- '.' = clear field;  '-' = go to previous field;  ^D = quit
- boot device          : geisc0
- processor number     : 0
- host name            : daq1
- file name            : /home/daq/CODA/VXWorks/vx6100_v4.1
- inet on ethernet (e) : 134.50.3.216
- inet on backplane (b): 0
- host inet (h)        : 134.50.3.210
- gateway inet (g)     :
- user (u)             : daq
- ftp password (pw) (blank = use rsh):
- flags (f)            : 0x0
- target name (tn)     : roc1
- startup script (s)   : /home/daq/CODA/bootscripts/roc1.boot
- other (o)            :
-== Type "@" to reboot the ROC ==
- [VxWorks Boot]: @
- boot device          : geisc
- unit number          : 0
- processor number     : 0
- host name            : daq1
- file name            : /home/daq/CODA/VXWorks/vx6100_v4.1
- inet on ethernet (e) : 134.50.3.216
- inet on backplane (b): 0
- host inet (h)        : 134.50.3.210
- user (u)             : daq
- flags (f)            : 0x0
- target name (tn)     : roc1
- startup script (s)   : /home/daq/CODA/bootscripts/roc1.boot
- Attached TCP/IP interface to geisc0.
- Warning: no netmask specified.
- Attaching network interface lo0... done.
- Loading... 1784832
- Starting at 0x100000...
- Attached TCP/IP interface to geisc unit 0
- Attaching interface lo0...done
- Adding 5075 symbols for standalone.
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
-      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)
- ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]
- ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
- ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
- ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
- ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
- ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
- ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
- ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.5.1
- ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.6
- ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2003
-                               CPU: Motorola MVME6100-0163 - MPC 7457.  Processor #0.
-                              Memory Size: 0x10000000.  BSP version 1.2/2.
-                             WDB Comm Type: WDB_COMM_END
-                            WDB: Ready.
- Executing startup script /home/daq/CODA/bootscripts/roc1.boot ...
- # Boot file for CODA ROC 2.0
- # PowerPC version
- # up the sliding window
- tcp_sendspace=0x8000
- tcp_sendspace = 0x283a60: value = 32768 = 0x8000
- tcp_recvspace=0x8000
- tcp_recvspace = 0x283a64: value = 32768 = 0x8000
- # Setup environment / load coda_roc
- putenv "MSQL_TCP_HOST=daq1"
- value = 0 = 0x0
- putenv "EXPID=LDS"
- value = 0 = 0x0
- putenv "TCL_LIBRARY=/home/daq/CODA/2.5/common/lib/tcl7.4"
- value = 0 = 0x0
- putenv "ITCL_LIBRARY=/home/daq/CODA/2.5/common/lib/itcl2.0"
- value = 0 = 0x0
- putenv "DP_LIBRARY=/home/daq/CODA/2.5/common/lib/dp"
- value = 0 = 0x0
- putenv "CMLOG_PORT=8102"
- value = 0 = 0x0
- putenv "TOKEN_PORT=5555"
- value = 0 = 0x0
- putenv "SESSION=daq"
- value = 0 = 0x0
- # Download Message logging libraries/client
- ld < /home/daq/CODA/2.5/CMLOG/2.1/bin/ppc-vw55/cmlogClientD
- value = 231515072 = 0xdcca3c0
- ld < /home/daq/CODA/2.5/CMLOG/2.1/lib/ppc-vw55/libcmlog.a
- value = 231514544 = 0xdcca1b0
- ld < /home/daq/CODA/2.5/CMLOG/2.1/bin/ppc-vw55/cmlogVxLogMsg
- value = 231514016 = 0xdcc9fa0
- cd "/home/daq/CODA/2.5/VXWORKSPPC55/lib"
- value = 0 = 0x0
- ld < libcamac.o
- value = 231515648 = 0xdcca600 = camacLockKey + 0x260
- cd "/home/daq/CODA/2.5/VXWORKSPPC55/bin"
- value = 0 = 0x0
- ld < coda_roc
- Undefined symbol: popen (binding 1 type 0)
- Undefined symbol: pclose (binding 1 type 0)
- Undefined symbol: et_name (binding 1 type 0)
- ld error: Module contains undefined symbol(s) and may be unusable.
- value = 0 = 0x0
-Done executing startup script /home/daq/CODA/bootscripts/roc1.boot
- Done executing startup script /home/daq/CODA/bootscripts/roc1.boot