VFAT board mirror

From New IAC Wiki
Revision as of 05:03, 9 April 2009 by Oborn (talk | contribs) (New page: The prototype VFAT breakout board has the A and B sides switched on the PCB. For the final board this will need to be fixed, but for the run on the HRRL we need a mitigating strategy. Basi...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The prototype VFAT breakout board has the A and B sides switched on the PCB. For the final board this will need to be fixed, but for the run on the HRRL we need a mitigating strategy. Basically we need to switch each pair of cables to be correct or adjust otherwise.

Ribbon cable pinouts

# VFAT
pin #
Name Value Test rig color
Primary/Second
(main color/smaller color)
mirror strategy
B1 DGND Digital Ground Black/Grey (shared) Switch the DGND and DVDD traces along the bottom
A1 DVDD +2.5V Red/Grey (shared) Switch the DGND and DVDD traces along the bottom
B2 168 SDA I2C Data Green/Yellow Switch the SDA and SCL wires coming onto board
A2 167 SCL I2C Clock Yellow/Green Switch the SDA and SCL wires coming onto board
B3 DGND Digital Ground Black/Grey (shared) Switch the DGND and DVDD traces along the bottom
A3 DVDD +2.5V Red/Grey (shared) Switch the DGND and DVDD traces along the bottom
B4 162 DACo-V DAC output Volt No Connection Not used in this experiment
A4 163 DACo-I DAC output Current No Connection Not used in this experiment
B5 164 I2C ADDR 2 I2C Address Most White/Blue Adjust in software/i2c address selector
A5 165 I2C ADDR 1 I2C Address Middle White/Orange Adjust in software/i2c address selector
B6 166 I2C ADDR 0 I2C Address Least White/Green Cut trace and wire appropriately
A6 169 REsB Soft Reset (Program saved) White/Grey Wire to Vcc
B7 170 ForceRehOff ?? bond to grnd No Connection Use hard reset pin to set to correct value
A7 171 REhB Hard Reset Grey/White Bridge to A6 (soft reset/Vcc)
B8 173 MCLKB (-) Orange/Purple Reverse LVDS wire/signal
A8 174 MCLK (+) Purple/Orange Reverse LVDS wire/signal
B9 175 T1B (-) Green/Purple Reverse LVDS wire/signal
A9 176 T1 (+) Purple/Green Reverse LVDS wire/signal
B10 177 ScanOut Brown/Purple Reverse LVDS wire/signal
A10 178 ScanIn Purple/Brown Reverse LVDS wire/signal
B11 180 DataValidB (-) Grey/Purple Reverse LVDS wire/signal
A11 181 DavaValid (+) Purple/Grey Reverse LVDS wire/signal
B12 182 DataOutB (-) Blue/Black Reverse LVDS wire/signal
A12 183 DataOut (+) Black/Blue Reverse LVDS wire/signal
B13 184 SB8 (-) Orange/Black Not used on breakout board
A13 185 S8 (+) Black/Orange Not used on breakout board
B14 186 SB7 (-) Green/Red Not used on breakout board
A14 187 S7 (+) Red/Green Not used on breakout board
B15 188 SB6 (-) Orange/Red Not used on breakout board
A15 189 S6 (+) Red/Orange Not used on breakout board
B16 190 SB5 (-) Blue/Red Not used on breakout board
A16 191 S5 (+) Red/Blue Not used on breakout board
B17 192 SB4 (-) Grey/Yellow Not used on breakout board
A17 193 S4 (+) Yellow/Grey Not used on breakout board
B18 194 SB3 (-) Brown/Yellow Not used on breakout board
A18 195 S3 (+) Yellow/Brown Not used on breakout board
B19 196 SB2 (-) Orange/Yellow Not used on breakout board
A19 197 S2 (+) Yellow/Orange Not used on breakout board
B20 198 SB1 (-) Blue/Yellow Not used on breakout board
A20 199 S1 (+) Yellow/Blue Not used on breakout board
B21 DGND Digital Ground No Connection Switch the DGND and DVDD traces along the bottom
A21 DVDD +2.5V No Connection Switch the DGND and DVDD traces along the bottom
B22 DGND Digital Ground No Connection Switch the DGND and DVDD traces along the bottom
A22 179 ScanEn Scan Mode Enable No Connection
B23 AGND Analog Ground No Connection Switch AGND and AVDD wires coming onto board
A23 AVDD 2.5V Grey/Red Switch AGND and AVDD wires coming onto board
B24 AGND Analog Ground Grey/Black Switch AGND and AVDD wires coming onto board
A24 AVDD 2.5V Grey/Red Switch AGND and AVDD wires coming onto board
B25 AGNDD Analog Ground Grey/Black Switch AGND and AVDD wires coming onto board
A25 AVDD 2.5V Grey/Red Switch AGND and AVDD wires coming onto board