TF JeepWrangler

From New IAC Wiki
Jump to navigation Jump to search

YJ Background

The Jeep Wrangler YJ was introduced in 1987. In 1988 some minor changes were made including the way the upper half doors attached to the lower half doors. Little changed for Wrangler YJ jeep parts in model years 1989 and 1990. Starting in 1991, the 4.2 liter in-line 6 cylinder engine was upgraded to the fuel injected 4.0 Liter High Output engine which remained in Jeep Wranglers for the next 15 years. In 1992, the classic roll bar was changed to the more elaborate cage which provided the Jeep Wrangler YJ rear passengers with greater protection. With the exception of minor interior and trim details, Wrangler YJ Jeep parts remained unchanged in model years 1993, 1994 and its final production year 1995.


http://www.jeepforum.com/wiki/index.php/YJ_Wrangler

My Specs

Year/Model

TF JW 04032011 11.jpg
1989 YJ Wrangler (1/22/89)
Half Doors
Power Steering
No Air Conditioning

VIN

2J4FY19E2KJ129902

Body Code Plate

CFM CKC  KWX  K3Z  END
127   FP040901    VJS   YJJE77
APA  PE3   QE3   P6SA  EPD
DDQ  U  2J4FY19E2KJ129902

=>

Vehicle Order # : 127-FP040901

Vinyl Roof Code : VJS

Vehicle Model #: YJJE77

Paint Proceedure: APA

Primary Paint # : PE3

Secondary paint :QE3

Transmission Code: DDQ

Market U-C-B-M Code: U

Engine

2.5 L 4 cylinder

http://www.jeepforum.com/wiki/index.php/2.5L_I-4

ID:82722

Transmission

Manual 5 spd (AX4/5 )

http://www.jeepforum.com/wiki/index.php/AX-5

#81015705

Rear Axle (Dana 35) Tag:

http://www.jeepforum.com/wiki/index.php/Dana_35

53003873
4-11-605295-4

Front Axle (Dana 30)Tag:

http://www.jeepforum.com/wiki/index.php/Dana_30

53003711
10-10323-4

Transfer Case NP231

http://www.jeepforum.com/wiki/index.php/NP231

YJ1989TransfrCaseTag.jpg

C-16|17J

Before Pictures

TF_JW_07032011 ---


according to

http://consumerguideauto.howstuffworks.com/1990-to-1995-jeep-wrangler-6.htm

Prices Good Average Poor Wrangler 6-cyl. $2,600-3,200 $1,900-2,400 $500-700 Wrangler S 4-cyl. $2,000-2,500 $1,400-1,800 $300-400


1987-1995 Jeep Wrangler YJ

Components

LED lights

Vision X Off Road just released another new LED light product: a

http://www.visionxusa.com/index.html

Light guards

http://cgi.ebay.com/ebaymotors/11230-02-Headlight-Turn-Light-Guards-JEEP-Wrangler-YJ-_W0QQcmdZViewItemQQfitsZMakeQ3aJeepQ7cModelQ3aWranglerQQhashZitem2c5ce04c80QQitemZ190536764544QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/JEEP-WRANGLER-YJ-87-95-NEW-STONE-GUARD-SET-6-Pc-SATIN-_W0QQcmdZViewItemQQhashZitem588dfebee1QQitemZ380339404513QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Bumper

EXT Series Swing-Away Bumper, 87-06 YJ/TJ/Unl Wrangler (Has attachment for HiLift jack)

http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=34900&Category_Code=bum_wil

http://cgi.ebay.com/ebaymotors/JEEP-WRANGLER-YJ-TJ-87-06-REAR-TUBE-BUMPER-HITCH-_W0QQcmdZViewItemQQhashZitem56441d6215QQitemZ370509963797QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


Jeep rock crawler rear bumper CJ YJ TJ Wrangler

http://cgi.ebay.com/ebaymotors/87-06-Jeep-YJ-TJ-Wrangler-SRC-Rock-Crawler-Rear-Bumper-_W0QQcmdZViewItemQQfitsZMakeQ3aJeepQ7cModelQ3aWranglerQQhashZitem27ba043bbeQQitemZ170624564158QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


http://cgi.ebay.com/ebaymotors/1987-2006-Jeep-Wrangler-YJ-TJ-Rear-Rock-Crawler-Bumper-_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3dUCIQ26otnQ3d3Q26poQ3dLVIQ26psQ3d63Q26clkidQ3d144718694964125867QQ_trksidZp3286Q2em7QQitemZ350464039837


http://cgi.ebay.com/ebaymotors/Jeep-REAR-Bumpers-Rock-Crawler-Wrangler-YJ-TJ-LJ-87-06-_W0QQcmdZViewItemQQhashZitem2eb25d2a03QQitemZ200560945667QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

LED tailights

LED tail light will use less electricity than lumi

http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-LED-TAIL-LIGHTS-TJ-CJ-YJ-CJ5-CLEAR-LENS-_W0QQcmdZViewItemQQhashZitem3367f1efdcQQitemZ220787240924QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-LED-TAIL-LIGHTS-TJ-CJ-YJ-CJ5-RED-LENS-_W0QQcmdZViewItemQQhashZitem45fab8ebcdQQitemZ300559166413QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Floor plugs

http://cgi.ebay.com/ebaymotors/15-1-Body-Floor-Drain-Plugs-Jeep-Wrangler-YJ-1987-95-_W0QQcmdZViewItemQQfitsZMakeQ3aJeepQ7cModelQ3aWranglerQQhashZitem564434995eQQitemZ370511485278QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Fenders

Drivers side

https://www.fortec4x4.com/product.php?productid=5024&cat=15&page=1

pasenger side

https://www.fortec4x4.com/product.php?productid=5023&cat=15&page=1

Marker lens

http://www.jeep4x4center.com/product-information.asp?number=56001424

http://cgi.ebay.com/ebaymotors/JEEP-WRANGLER-YJ-SIDE-MARKER-LAMPS-87-95-PAIR-NEW-_W0QQcmdZViewItemQQhashZitem3cb4015bffQQitemZ260718025727QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Shifter knob

5 spd knob:

http://www.quadratec.com/products/96117_403.htm

http://www.quadratec.com/jeep-replacement-parts/manual_transmission/shift_knobs.php

seat belts

http://www.jeepbox.com/index.php?cPath=10066_10073_10076

http://www.autopartswarehouse.com/shop_parts/seat_belt/jeep/wrangler.html

http://www.seatbeltcity.com/Seat_Belt_Selector

Windshield

http://www.jeep4x4center.com/jeep-windshield-parts/wrangler-yj.htm

Hard Tops

One piece

http://www.jeep4x4center.com/jeep-hard-tops/1piece-wrangler-yj.htm


http://www.quadratec.com/products/11090_0111.htm


http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-YJ-CJ-7-hard-top-black-COMPLETE-LOOK-_W0QQcmdZViewItemQQhashZitem2a109604feQQitemZ180666893566QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-YJ-Hard-Top-87-95-CJ-76-86-_W0QQcmdZViewItemQQhashZitem5ade220b99QQitemZ390273829785QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

2 piece

Wrangler 1989 2PieceHardTop.png

http://www.jeep4x4center.com/jeep-hard-tops/2piece-wrangler-yj.htm


$2,000

http://www.quadratec.com/products/11090_0102_07.htm


http://www.jeepforum.com/forum/f12/installing-bestop-fiberglass-upper-door-sliders-yj-tj-960495/

Installing fiberglass upper half doors

http://www.jeepforum.com/forum/f12/installing-bestop-fiberglass-upper-door-sliders-yj-tj-960495/


Bull Dawg Manufacturing ($610)(ph:423-400-7517)

http://cgi.ebay.com/ebaymotors/87to95-Jeep-Wrangler-YJ-Fiberglass-Hard-Upper-Door-Set-/320713677358?pt=Motors_Car_Truck_Parts_Accessories&hash=item4aac065a2e

Soft Tops

Installation Manual


Permatex Vinyl & Leather Repair Kit (Item # 81781) http://www.amazon.com/Permatex-81781-Ultra-Leather-Repair/dp/B0007TQWK6

Windshield side retainers

http://www.thepartsbin.com/sitemap/jeep~soft_top_hardware~parts.html


http://www.jcwhitney.com/cab-top-and-tonneau-combination/p2002742.jcwx?filterid=c16047d1202y1989j4&_requestid=698242#


Sunrider Soft Top

http://cgi.ebay.com/ebaymotors/87-95-Jeep-Wrangler-YJ-Bestop-Sunrider-Soft-Top-_W0QQcmdZViewItemQQhashZitem2c5ca7e89cQQitemZ190533068956QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Carpet

http://www.jeep4x4center.com/jeep-carpets/index.htm?gclid=CLvN6IjB9agCFQo0QgodzwncSQ

Differentials

Protective cover

http://www.superlift.com/accessories/extremering.asp

Body Mount bushings

http://cgi.ebay.com/ebaymotors/87-95-JEEP-YJ-PROTHANE-BODY-MOUNT-BUSHING-KIT-1-105-BL-_W0QQcmdZViewItemQQfitsZMakeQ3aJeepQ7cModelQ3aWranglerQQhashZitem20b98e6e95QQitemZ140552072853QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Springs and bushings

Poly bushings not recommended by one Forum member due to vibration translating up steering column

http://www.4wd.com/hardparts/HP_PartList.aspx?hpDID=114 Front $85 Rear $88

Omix:

http://www.discountjeepparts.com/product_info.php/cPath/91_3046/products_id/4529 Front 4 leaf $76

http://www.discountjeepparts.com/product_info.php/cPath/91_3046/products_id/25573 Rear 6 leaf $92

http://www.discountjeepparts.com/product_info.php/cPath/91_3046/products_id/25574 Rear 5 leaf $93


Acme:

http://www.acmejeepparts.com/products/56010_08.htm Front 4 leaf $105

http://www.acmejeepparts.com/products/56010_09.htm Rear 4 leaf $93

Add a Leaf kit

http://www.quadratec.com/products/16026_002.htm


Forum info:

I don't know how much lift you're seeking, but stock springs are plentiful and cheap. Places besides the dealer sell them new too. My big beefs with the stock springs are the restrictive clamps and the too-soft rate when loaded down. I had the same softness problem with my RE ED 2.5" springs, until I added extra full-length leaves. They still flex like a yoga master, but that setup may provide too much lift for your SOA application. Any spring will eventually need replacement. Did you want stock-height or lift springs? Custom springs cost more but can be made for individual applications. OME, National, and Alcan have good reps. BDS has a lifetime warranty. Some companies make springs in minimal 1-1.5" lift height (Rancho, RE, etc). Unless you go with some exotic material ('glass, boron, graphite, etc.) and not spring-steel, look for tapered-leaf, pre-stressed, shot-peened springs, with anti-friction pads between the MANY leaves and bolt-style clamps. Some people like military-wraps, but I usually cut them off to allow more droop. Some ways to make leafpacks last longer usually involve stressing them less, but who wants to park their Jeep on a hydraulic lift and leave it? - Try longer, staged, poly bumpstops that don't allow negative arching. Droop is where you want to get your best flex from anyway. - Use greasable bushings and keep them well-lubed. - Do NOT overtighten the bushing bolts. Tighten just enough to eliminate play. Too-tight bushings over-stress the mainleaves and hurt ride/flex. - Use overload leaves and anti-wrap devices like links, long axle seats, or short soft leaves on top. Properly set center-mounted links generally don't hinder droop when articulating as much as the other anti-wrap methods mentioned. - Use a center-mounted airbag between the diff and the frame when loaded heavily. It won't hurt articulation much, but will help handle weight. - Use revolver shackles and either z-boxes or football-shaped bushings to relieve some torsional stress on the springs. - Make sure your shocks perform well. - Run lightweight wheel assemblies and don't over-inflate your tires. - Go easy on the gas pedal. - Shave weight from the Jeep wherever practical and safe. - Use lockers at both ends and don't worry about having mondo flex.

Door handles

http://off-roadjeep.com/s/1/p/OAI11815.01/d/77

Transmission

NV4500

the NV4500 has a place for a PTO (Power Take Off), you can use it to run a winch.

http://www.nv4500.com/

http://www.offroaders.com/directory/products/NV4500.htm

It’s often cheaper to swap in a NV4500 into a Jeep instead of rebuilding the problematic factory Jeep transmission. PLUS, it's an easy swap when you use a Dodge version of the NV4500 transmission, because all that’s needed is a bellhousing adapter plate. Additionally, on Dana 300 applications the Dodge version is preferable because the adapter requires a Dodge output shaft, and utilizes a stock Dodge 4x4 tail housing. The stock 23-spline input gear for the Dana 300 is retained, and the tail housing bolts directly to the mounting face of the Dana 300 transfer case.

Transm + Adapter

http://www.quadratec.com/products/52158_001_T.htm

Adapter Only http://www.quadratec.com/products/52158_201.htm

Advanced Adapters (http://www.advanceadapters.com/acrobat/jpretrofits.pdf)

NV4500 (1993-94): During the first two years of the New Venture 4500, Chevy offered this 5 speed with a 6.34:1 1st gear; 2nd 3.44:1; 3rd 1.71:1; 4th 1:1 ratio, and a 27% overdrive. It was also the first year that Chevy changed the bellhousing-to-transmission bolt pattern. This transmission is ideal when converting your vehicle, providing an ultra-low 1st gear. GM, however, only produced this particular ratio during these years. The major complaint of this 5 speed was stiff shifting and noise in 3rd gear.

NV4500 (1995): This transmission is identical to the 1993-94 transmission, except the 1st gear ratio had been changed to 5.61:1; 2nd 3.04:1; 3rd 1.67:1; 4th 1:1 ratio, and a 27% overdrive. The noise and shifting problems had been corrected.

NV4500 (1996-2003): This transmission has the same gear ratio as the 1995 version. Chevy once again changed the bellhousing-to-transmission bolt pattern and went to a larger bellhousing index diameter. This Chevy NV4500 has the same bellhousing-to-transmission bolt pattern as the Dodge NV4500. These transmissions use a GM internal release bearing.

Dodge NV4500 (1993-2003): This transmission is the same as the 1996-99 Chevy version; however, the only difference is the transmission input shaft, output shaft, and the tailhousing. The 2001 & up Dodge transmission was changed to a 29 spline output shaft. All NV4500 transmissions have a 12.375” case length. (For more information on New Venture transmissions, order instruction manual NV001)

Forum response post

A.)

Originally posted by Neo
I am interested in replacing my 92 YJ AX15 with an NV4500, but am uncertain which 
years and models of the GMC and Dodge vehicles came with them. Also, if anyone 
has any advice on this swap out, that would be greatly appreciated. So far, 
simply have the SYE and D44 in the rear with a slightly modified (Clifford Cam, 
Header, Loads of head work, blah blah) mill pushing things. Advice on things 
like clutch, bellhousing and linkage would be great. Thanks!

Do as much research as you can before you start the swap. Check out AA and Novak for adapters. AA has install instructions with diagrams that should help with the swap. I used a stock TJ clutch on mine. You'll probably need a CJ 4cyl slave from 4wheelparts or someone else, plus the stainless line and fittings to attach it to the master. I replaced the slave pushrod with some allthread and a couple of jam nuts. You'll need to get at least 1" of travel from the slave to full dissengage the clutch. Not sure what you'll have to do about the YJ tcase shifter. You'll probably have to modify your skid also. I used the bellhousing and tcase adapter housing from AA.


B.) The NV4500 makes driving your Jeep like driving a bread truck. I've had it in mine over a year now. You'll never break it, and the lower gears really makes the crawl ratio nice. The 5th gear is alittle higher than the ax5 so you lose some overdrive power on the hills. You either need to do a body lift, trim the tub, or lower the t case. I have mine shoehorned between a customer skid and the tub and I need to move my body up to kill some of the noise. It makes me sound like I'm about to throw a rod from the inside, outside the vehicle sounds like a diesel from the 'clack clack clack' of the tranny. They are not called 'box of rocks' for nothing.


C.) The only problem I ran into was that I didnt like the way AA wanted me to make a tranny mount. so I made my own up and it seems to be working fine. I would take your time and follow the many instruction sheets that come with it. Little hint on getting the pilot bushing out..drill two holes and thread them..then use a steering wheel puller. Seems to work the best from what people say. I used that trick and it was piece of cake.


D.) I just got done with the install of an NV4500 with the 6.34 1st gear and an Atlas II 4.3 with the heavy duty front out put and the Currie Crawler custom drilled case, along with Tom Woods drive shafts with the new Rock and Roll front sleeve, and a few other things. The tranny is sweet. I modified the stock console so that I could reuse it and had to modify the skid plate so that it would clear and I do have a one inch body lift wich I would say is more then mandatory. There is a great write up along with pics at http://www.off-road.com/jeep/reviews/yj1-nv45001.htm that I found when researching all of the options. The gears are very close to a stock wrangler five speed minus the granny low 1st gear so the thing goes great on the street.

E.)However, for the current build I wanted a deeper first gear and a more stout transmission in general because it was going in front of a doubler t-case and larger hardware all around. So I went with the 4500, and it's pretty friggin big. Had to cut and rearrange a lot of stuff to make it fit but it ended up OK, and the advance adapters stuff to make it fit is all high-quality and worked perfectly. It also has a large overdrive so you can run really nice axle gearing and still have decent highway RPM's.

Manual Steering Gear Box

http://york.craigslist.org/pts/2489500944.html

Tires

MICKEY THOMPSON BAJA CLAW

http://rustysoffroad.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=rustys&Category_Code=MT

Brakes

EBC Brakes

http://www.ebcbrakes.com/

Rhino Lining

233-4147

$700 to do the tub and the skid plate Red, need to order 2-3 weeks in advance for colors.

Can also do the frame but you need to plug the holes or tap them out.

Accessories

Hitch

http://www.etrailer.com/hitch-1989_Jeep_YJ.htm

rear bumper with hitch

http://cgi.ebay.com/ebaymotors/JEEP-WRANGLER-YJ-TJ-REAR-BUMER-HITCH-RECEIVER-_W0QQcmdZViewItemQQhashZitem3f0a0f8ed5QQitemZ270751731413QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Skid plates

http://www.4wd.com/Armor-Protection/RockGuard-BellyUp-Skid-Plate-for-Jeep.aspx?t_c=79&t_s=467&t_pt=3545&t_pl=103546&t_pn=TER4648400

http://www.quadratec.com/products/product_search.php?cn=Skid+Plates&c=26&sv=400


http://www.4wd.com/Armor-Protection/Rugged-Ridge-Skid-Plates-for-Jeep.aspx?t_c=79&t_s=467&t_pt=3545&t_pl=103219&Year=1989&Make=JEEP&Model=WRANGLER+%2887-95YJ%29

http://www.quadratec.com/products/12518_300_07.htm

http://www.quadratec.com/products/26038_06.htm

http://www.quadratec.com/products/92023_102.htm

http://www.quadratec.com/products/92023_101.htm

http://www.quadratec.com/products/12500_1000.htm

Vendors

Rusty's Off Road products

http://rustysoffroad.com


http://off-roadjeep.com/

All Jeep Parts e-bay store

http://stores.ebay.com/alljeepparts401/TJ-Wrangler-1997-2006-/_i.html?_fsub=1050996011&_sid=833782521&_trksid=p4634.c0.m322

http://www.jeepoemparts.com/

http://www.thepartsbin.com/catalog/parts.php?year=4294963356&make_text=1557&model_text=10852

http://www.jeep4x4center.com/yj/menu.htm

http://www.etrailer.com/vtk-1989_Jeep_YJ.htm

http://www.autotrucktoys.com/jeep/

http://www.jcwhitney.com/jeep-parts-jeep-accessories/j4s2.jcwx?TID=8995449&JCW=1&JCW_SRC=PPC&gclid=COiMrcnC9agCFRRigwod9EfVRw

http://www.4wd.com/

Cargo Hitch mount racks

http://www.4wd.com/productdetails.aspx?partID=60980

http://www.4wd.com/productdetails.aspx?partID=10580

http://www.4wd.com/productdetails.aspx?partID=54149

http://www.4wd.com/productdetails.aspx?partID=54146

http://www.4wd.com/productdetails.aspx?partID=54147

http://www.4wd.com/productdetails.aspx?partID=54148

Removing vaccum from transfer case

Wrangler Forum

http://www.wranglerforum.com/f8/vacuum-shift-motor-inexpensive-fix-87568.html


From Wrangler Forum

http://www.wranglerforum.com/f8/by-passing-frt-diff-4wd-vacuum-78334.html



1. jack up right frt. tire and place on jack stand (easier if not done on a day that snow is not packed on your jeep...lol)

2. unplug vacuum lines from the shift motor actuator and cap off you will not need them any more .

3.remove the four bolts holding shift motor on and remove it (don't forget to have a pan or towel on the floor to catch the very amount of lube that will come out)

4.now look at the axle see how the collar slides over to connect the two axle's together? you might have to turn the right tire a little as you use your finger to slide it to left all the way as the splines line up now your frt. diff is locked into fwd. ( that's a good thing for a jeep)

5.now take apart the shift motor.take a marker and put a dot on one side of the fork and a dot on the matching side of the housing so you will remember what way the fork faces( trust me it saves time..lol) remove the two e-clips holding the shift fork shaft in place and pull shaft out. discard everything but the shaft,fork and big e-clip

6.now put the shaft with the fork back in the housing (no e-clip yet) and move the fork all the way to the right that is where it is when the 4wd is locked in ( remember the collar you slide to the left to lock the axle's together?)

7. now get a spring or fuel line (like i did) and cut it to take up the space on the shaft so that the fork can not move to the right ( and yes the spring or hose needs to fit over the shaft and I am sorry i did not measure the length or i.d for ya but heck you need to do a little of the work yourself) tip: if you use a piece of hose it needs to be fuel and oil resistant ( mine has been set this way for two years)

8.after you get the spacer cut right put in the e-clip so the shaft won't come out.

9. reinstall on the diff. using a little gasket sealer or a new gasket and your almost done. top off the lube if you feel like the little bit that came out is a bad thing.

10. you are now done and have a much improved 4wd set up. you will not notice a drop in mpg, no change in handling ( transfer case disconnects the frt. drive). what you will feel is a good feeling knowing your frt. axle really is locked in when it's needed ( yep even when it is -7 degree's like it is here to day)


Kit for changing vacuum to manual shifting

http://www.4x4posi-lok.com/app_jeep.html

You can buy an iron version of the fork separately. The OEM one is aluminum.

Specifications

Mass

Towing capacity

Towing capacity is less than 2,000 lbs.

Payload is around 1000 lbs.

Vendors

Forum Advice

YJ FAQ

http://bc4x4.com/faqs/yj.cfm?cat=8

Sputtering

First try the fuel filter

Then try changing the throttle position sensor if your jeep sputters.

Suspension

1

I think a recipe for a nice daily driver / weekend wheeler YJ would be this:

2 1/2" suspension lift. Rancho 9000 adjustable shocks, 31" tires.

TDI Diesel conversion

A guy put a TDI diesel into his 1977 Jeep CJ-7

http://www.jeepforum.com/forum/f22/1977-cj-7-converted-vw-tdi-diesel-1200160/

several pictures and a video can be seen at

http://s844.photobucket.com/albums/ab4/tdicj7/?action=view&current=JeepStuck.mp4#!oZZ5QQcurrentZZhttp%3A%2F%2Fs844.photobucket.com%2Falbums%2Fab4%2Ftdicj7%2F%3Faction%3Dview%26current%3DP1010099.jpg

Below is an article about a company selling TDI diesel install kits


http://blogs.jpmagazine.com/6667601/editorials/easy-jeep-vw-tdi-diesel-swap/page2.html

A company web page selling TDI install kits for jeeps

http://www.hpamotorsport.com/TDI-YJ-AX5.htm


Buy a Jeep Wrangler YJ from 1985-1997 and use the kit Stage 1 DIY Package: $2599

Still need to buy a TDI diesel engine



may be able to get the TDi diesel engine from

http://www.gex.com/vw-diesel-engine.htm

for example Part # Description Year Liters Code $ Price GV N10584 New Volkswagen Jetta engine, TDI diesel, Long Block, w/ timing components & water pump. 038100020PD3600 03-05 1.9 ATD, BEW 4,799.00



TF_EV