Difference between revisions of "PbBi BeamLine Elements"

From New IAC Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 +
=Beam spot parameters=
 +
 +
Below is an assumed electron beam from the 25b machine (or any medical linac)
 +
 +
https://wiki.iac.isu.edu/images/c/c0/Kim_HRRL_Optics_10-14-10.png
 +
 
=Beam Line Elements=
 
=Beam Line Elements=
 
[[Image:PositronBeamLine_Layout.jpg | 200 px]]
 
[[Image:PositronBeamLine_Layout.jpg | 200 px]]

Revision as of 23:04, 14 May 2015

Beam spot parameters

Below is an assumed electron beam from the 25b machine (or any medical linac)

https://wiki.iac.isu.edu/images/c/c0/Kim_HRRL_Optics_10-14-10.png

Beam Line Elements

PositronBeamLine Layout.jpg

This picture shows you the current 90 degree bend into the experimental hall. Quad 1 and Quad 2 are shown and then the 2nd Dipole magnet (labeled Bending Magnet 2A a.k.a. Dipole 2) begins after Quad 1 and Quad 2.

IAC 25MeV 90DegreeBend 11-08-07.jpg

Dipole

Label on side of Dipole 1

IAC 25MeV Dipole1 Label 11-08-07.jpg

Label on side of Dipole 2

IAC 25MeV Dipole2 Label 11-08-07.jpg


IAC 25B Dipole.jpg

Quads

IAC 25B Quads.jpg


The Quad doublets in the current beam line have the following label.

IAC 25MeV QuadDoublet Label 11-08-07.jpg

Quad doublet size:

QuadDoublet Width.jpg

QuadDoublet Length.jpg

QuadDoublet CoilSize.jpg


G4Beamline_PbBi#Beam_Line_Design