MINIDC MinVoltageStudy

From New IAC Wiki
Jump to navigation Jump to search

Operating Voltage Study

We will lower the operating voltage and take scope pictures to determine the operating point for the mini chamber.


SenseWire 1

Preamplifier voltage was set to 5.9 Volts.

Sense Wire HV (Volts) Field Wire HV (Volts) Scope Image
1700 -850 SenseWire1 1700V Cosmic 10-12-07.jpg
1690 -845 SenseWire1 1690V Cosmic 10-12-07.jpg


Sense wire 2

Preamplifier voltage was set to 5.9 Volts. We saw a lot of noise ( 40 mV peak to peak) when increasing the preamp voltage from 2.2 V to 5.7 Volts. After 5.7 volts the noise when back to a noise level of 8 mV peak to peak which is smaller than the 16 mV peak to peak noise observed 3 days ago on the sense wire (capacitor side)before the preamp.


Sense Wire HV (Volts) Field Wire HV (Volts) Scope Image
1700 -850 SenseWire2 1700V Cosmic 10-12-07.jpg
1690 -845 200 px



SenseWire 3

Preamplifier voltage was set to 5.9 Volts.

Sense Wire HV (Volts) Field Wire HV (Volts) Scope Image
1700 -850 SenseWire3 1700V Cosmic 10-12-07.jpg
1690 -845 SenseWire3 1690V Cosmic 10-12-07.jpg



SenseWire 4

Preamplifier voltage was set to 5.9 Volts.

Sense Wire HV (Volts) Field Wire HV (Volts) Scope Image
1700 -850 200 px
1690 -845 200 px


SenseWire 5

Preamplifier voltage was set to 5.9 Volts.

Sense Wire HV (Volts) Field Wire HV (Volts) Scope Image
1700 -850 200 px
1690 -845 200 px


Back to Mini Prototype page