Table of results

		Deformation (mm)
Sector 1	Constraint	Left E Max	Left Relative E Max	Right E Max	Right Relative E Max	D Max	X Max	Y Max	Z Max
Case 1	Downstream triangle with Upstream on Nose	0.057	0.053	0.061	0.032	0.065	0.053	-0.065	-0.030
Case 2	Downstream triangle with both sides on Nose	0.018	0.012	0.038	0.035	0.038	0.038	-0.021	-0.018
case 3	Upstream triangle with Upstream on Nose	0.099	0.093	0.105	0.092	0.135	0.111	-0.110	-0.093
case 4	Upstream triangle with both sides on Nose	0.103	0.064	0.117	0.053	0.129	0.109	0.119	-0.090
Case 5	Both side triangles with Upstream on Nose	0.058	0.054	0.065	0.031	0.065	0.051	-0.065	-0.027
Case 6	Both side triangles with both sides on Nose	0.019	0.015	0.034	0.031	0.034	0.034	-0.020	-0.015

Case 1

The constraints are as follows The Triangular sections are only constrained on the downstream side and the nose plate is constrained on the upstream side

The report generated by ANSYS is available: File:Case1 slice1.pdf

Figure 1: Images of Deflection for Sector 1 with case 1 constraints in D,X,Y,Z Directions respectively

Case 2

The constraints are as follows The Triangular sections are only constrained on the downstream side and the nose plate is constrained on both sides

The report generated by ANSYS is available: File:Case2 slice1.pdf

Figure 2: Images of Deflection for Sector 1 with case 2 constraints in D,X,Y,Z Directions respectively

Case 3

The constraints are as follows The Triangular sections are only constrained on the upstream side and the nose plate is constrained on the upstream side

The report generated by ANSYS is available: File:Case3 slice1.pdf