Difference between revisions of "Ftof p1a:Integrated Digitized Bank"

From New IAC Wiki
Jump to navigation Jump to search
Line 67: Line 67:
 
sector naming conversion for Sector 1 (S1) through Sector 6 (S6). The dashed lines denote
 
sector naming conversion for Sector 1 (S1) through Sector 6 (S6). The dashed lines denote
 
the mid-planes for each sector.]]
 
the mid-planes for each sector.]]
 +
 +
[[File:ftof_p1a.png |thumb | center | FTOF Part 1 A | 600px | Figure 4: View of the face of a generic FTOF panel-1a array showing the numbering scheme
 +
for the 23 scintillators that make up the counters in each of the six sectors of CLAS12.]]

Revision as of 15:40, 22 July 2016

Caption
SubBank Number Variable Description
1 sector
2 paddle
3 ADCL
4 ADCR
5 TDCL
6 TDCR
7 ADCLu
8 ADCRu
9 TDCLu
10 TDCRu
99 hitn

Geometry Description (CLAS12 NOTE 2016-?)

Figure 1: View of the FTOF counters for CLAS12 highlighting the location of the panel-1 and panel-2 counters. The panel-1b counter arrays are shown in orange and the panel-2 counter arrays, mounted around the perimeter of the Forward Carriage, are shown in red. The panel-1a counter arrays mounted just downstream of the panel-1b arrays are not visible in this picture. The Forward Carriage is roughly 10 m in diameter.
Figure 2: View of the FTOF scintillators for panel-1a, panel-1b, and panel-2 in the sector mid-plane with the key parameters indicated.


Figure 3: View of the upstream face of the Forward Carriage in Hall B showing the CLAS12 sector naming conversion for Sector 1 (S1) through Sector 6 (S6). The dashed lines denote the mid-planes for each sector.
Figure 4: View of the face of a generic FTOF panel-1a array showing the numbering scheme for the 23 scintillators that make up the counters in each of the six sectors of CLAS12.