Data Acquisition

From New IAC Wiki
Revision as of 19:25, 9 February 2015 by Foretony (talk | contribs)
Jump to navigation Jump to search IP address :

daq4 MAC address: 00:13:20:D4:02:C0

daq5 MAC address: 00:11:0a:e9:36:c3 IP address: IP address: ; HWaddr 00:20:38:04:6D:1C

LDS1 : A Dell desktop that used to be cairo

LDS2 : The Intel Icore 5 desktop that was used in the clean room

LDS3 rack server with 4 CPUs, Poweredge 2950

tachyon Eddie's computer for neutrino work

The data acquisition available at the Laboratory for Detector Science is modeled after the CEBAF (Continuous Electron Beam Accelerator Facility) Online Data Acquisition (CODA) system. The system involves a single board computer (Readout Controller) controlling a VME backplane which transfers digitized data from the VME backplane to a Host Computer. The Readout Controller (ROC) runs the VxWorks operating system and the host computer runs the CentOS ( free Red Hat) operating system. Libraries to control the VME modules are cross-compiled on the Host computer and then downloaded to the ROC. The suite of software packages which comprise CODA are used to manage the transfer of data from the ROC to the host computer.

Host Computer Configuration
Readout Controller Configuration
Installing CODA
SIS3600 Trigger Supervisor
Running CODA
VME modules
NIM Modules
VxWorks References