Difference between revisions of "CaGaS Phase II"

From New IAC Wiki
Jump to navigation Jump to search
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
='''CaGaS Phase II Physical Parameters'''=
+
<big>'''CaGaS Phase II is a repeat of capture gamma energy spectroscopy experiments performed during the summer of 2021 in the ISU clean room. The purpose of revisiting the capture gamma experiment is to use a new, higher activity <sup>252</sup>Cf source (U2-622) and to investigate different thicknesses of Gadolinium foils and the effect on the high energy photon flux produced. This work is being performed in support of the main conversion process for the In-Situ Positron Annihilation Spectroscopy experiment being designed and performed by INL staff and external collaborators.'''</big>
 +
 
 +
='''I) CaGaS Phase II Associated Equipment and Experimental Setup'''=
  
 
=='''Polyethylene'''==
 
=='''Polyethylene'''==
Line 11: Line 13:
 
[[CH Calibration Sources]]
 
[[CH Calibration Sources]]
  
−
='''Neutron Attenuation Measurements'''=
+
=='''Electronics Chain'''==
 +
 
 +
[[CH_HPGe_Electronics_Chain]]
 +
 
 +
='''II) Neutron Attenuation Measurements'''=
  
 
=='''Discriminator Dual Pulsing Investigation'''==
 
=='''Discriminator Dual Pulsing Investigation'''==
Line 23: Line 29:
 
=='''Revisited Measurements'''==
 
=='''Revisited Measurements'''==
  
−
[[CH He3 Attenuation Measurements Revisited]]
+
[[CH He3 Attenuation Measurements: 3 Different Cf252 Sources]]
  
−
[[CH He3 Attenuation Measurements High Activity Cf252]]
+
='''III) CaGaS Phase I Expansion'''=
−
 
 
−
='''CaGaS Phase I Expansion'''=
 
  
 
[[CaGaS Phase I Gadolinium]]
 
[[CaGaS Phase I Gadolinium]]
  
 
[[CaGaS Phase I Cadmium]]
 
[[CaGaS Phase I Cadmium]]
 +
 +
='''IV) HPGe Measurements'''=
 +
 +
[[PAS HPGe Detector]]
 +
 +
[[CH HPGe Efficiency]]
  
 
='''Previous Work'''=
 
='''Previous Work'''=
Line 40: Line 50:
  
 
[[CH ROOT Nonuniform Binning]]
 
[[CH ROOT Nonuniform Binning]]
−
 
−
[[CH_HPGe_Electronics_Chain]]
 
  
 
[[CH_PAS_Master_Logbook]]
 
[[CH_PAS_Master_Logbook]]
−
 
−
[[PAS HPGe Detector]]
 
  
 
[[CH_Isotope_Table]]
 
[[CH_Isotope_Table]]
Line 52: Line 58:
  
 
[[CH NIM Bin Repair]]
 
[[CH NIM Bin Repair]]
−
 
−
=old old source data=
 
−
 
−
=='''Poly Box Attenuation Measurements'''==
 
−
 
−
==='''Open Source'''===
 
−
 
−
{| class="wikitable mw-collapsible mw-collapsed" border="2" style="text-align:center;" |cellpadding="20" cellspacing="1
 
−
|-
 
−
| '''1250V source in'''||
 
−
|-
 
−
|  Run Number || Configuration || Discriminator Threshold (mV) || Cf-252 Source || Counts || Run Time (Sec) || Count Rate (Hz) || Uncertainty
 
−
|-
 
−
|  1  || Detector on poly at +1250V || 80 || Yes || 31 || 100 ||  ||
 
−
|-
 
−
|  2  || Detector on poly at +1250V || 80 || Yes || 32 || 100 ||  ||
 
−
|-
 
−
|  3  || Detector on poly at +1250V || 80 || Yes || 26 || 100 ||  ||
 
−
|-
 
−
|  4  || Detector on poly at +1250V || 80 || Yes || 23 || 100 ||  ||
 
−
|-
 
−
|  5  || Detector on poly at +1250V || 80 || Yes || 29 || 100 ||  ||
 
−
|-
 
−
|}
 
−
 
−
==='''2" Green poly (one brick) in Box'''===
 
−
 
−
{| class="wikitable mw-collapsible mw-collapsed" border="2" style="text-align:center;" |cellpadding="20" cellspacing="1
 
−
|-
 
−
| '''1250V source in'''||
 
−
|-
 
−
|  Run Number || Configuration || Discriminator Threshold (mV) || Cf-252 Source || Counts || Run Time (Sec) || Count Rate (Hz) || Uncertainty
 
−
|-
 
−
|  1  || Detector on poly at +1250V || 80 || Yes || 18 || 100 ||  ||
 
−
|-
 
−
|  2  || Detector on poly at +1250V || 80 || Yes || 27 || 100 ||  ||
 
−
|-
 
−
|  3  || Detector on poly at +1250V || 80 || Yes || 21 || 100 ||  ||
 
−
|-
 
−
|  4  || Detector on poly at +1250V || 80 || Yes || 21 || 100 ||  ||
 
−
|-
 
−
|  5  || Detector on poly at +1250V || 80 || Yes || 22 || 100 ||  ||
 
−
|-
 
−
|}
 
−
 
−
==='''4" Green poly (two bricks) in Box'''===
 
−
{| class="wikitable mw-collapsible mw-collapsed" border="2" style="text-align:center;" |cellpadding="20" cellspacing="1
 
−
|-
 
−
| '''1250V source in'''||
 
−
|-
 
−
|  Run Number || Configuration || Discriminator Threshold (mV) || Cf-252 Source || Counts || Run Time (Sec) || Count Rate (Hz) || Uncertainty
 
−
|-
 
−
|  1  || Detector on poly at +1250V || 80 || Yes || 31 || 100 ||  ||
 
−
|-
 
−
|  2  || Detector on poly at +1250V || 80 || Yes || 18 || 100 ||  ||
 
−
|-
 
−
|  3  || Detector on poly at +1250V || 80 || Yes || 19 || 100 ||  ||
 
−
|-
 
−
|  4  || Detector on poly at +1250V || 80 || Yes || 31 || 100 ||  ||
 
−
|-
 
−
|  5  || Detector on poly at +1250V || 80 || Yes || 30 || 100 ||  ||
 
−
|-
 
−
|}
 
−
 
−
==='''6" Green poly (three bricks) in Box'''===
 
−
 
−
{| class="wikitable mw-collapsible mw-collapsed" border="2" style="text-align:center;" |cellpadding="20" cellspacing="1
 
−
|-
 
−
| '''1250V source in'''||
 
−
|-
 
−
|  Run Number || Configuration || Discriminator Threshold (mV) || Cf-252 Source || Counts || Run Time (Sec) || Count Rate (Hz) || Uncertainty
 
−
|-
 
−
|  1  || Detector on poly at +1250V || 80 || Yes || 35 || 100 ||  ||
 
−
|-
 
−
|  2  || Detector on poly at +1250V || 80 || Yes || 24 || 100 ||  ||
 
−
|-
 
−
|  3  || Detector on poly at +1250V || 80 || Yes || 23 || 100 ||  ||
 
−
|-
 
−
|  4  || Detector on poly at +1250V || 80 || Yes || 21 || 100 ||  ||
 
−
|-
 
−
|  5  || Detector on poly at +1250V || 80 || Yes || 22 || 100 ||  ||
 
−
|-
 
−
|}
 
−
 
−
==='''8" Green poly (four bricks) in Box'''===
 
−
 
−
{| class="wikitable mw-collapsible mw-collapsed" border="2" style="text-align:center;" |cellpadding="20" cellspacing="1
 
−
|-
 
−
| '''1250V source in'''||
 
−
|-
 
−
|  Run Number || Configuration || Discriminator Threshold (mV) || Cf-252 Source || Counts || Run Time (Sec) || Count Rate (Hz) || Uncertainty
 
−
|-
 
−
|  1  || Detector on poly at +1250V || 80 || Yes || 20 || 100 ||  ||
 
−
|-
 
−
|  2  || Detector on poly at +1250V || 80 || Yes || 28 || 100 ||  ||
 
−
|-
 
−
|  3  || Detector on poly at +1250V || 80 || Yes || 29 || 100 ||  ||
 
−
|-
 
−
|  4  || Detector on poly at +1250V || 80 || Yes || 16 || 100 ||  ||
 
−
|-
 
−
|  5  || Detector on poly at +1250V || 80 || Yes || 22 || 100 ||  ||
 
−
|-
 
−
|}
 
−
 
−
 
−
----
 
  
 
='''Previous Page'''=
 
='''Previous Page'''=
  
 
[[PAS Experiment]]
 
[[PAS Experiment]]

Latest revision as of 22:53, 20 July 2022

CaGaS Phase II is a repeat of capture gamma energy spectroscopy experiments performed during the summer of 2021 in the ISU clean room. The purpose of revisiting the capture gamma experiment is to use a new, higher activity 252Cf source (U2-622) and to investigate different thicknesses of Gadolinium foils and the effect on the high energy photon flux produced. This work is being performed in support of the main conversion process for the In-Situ Positron Annihilation Spectroscopy experiment being designed and performed by INL staff and external collaborators.

I) CaGaS Phase II Associated Equipment and Experimental Setup

Polyethylene

CH_Poly_Density

Radioactive Sources

CH Cf252 Sources

CH Calibration Sources

Electronics Chain

CH_HPGe_Electronics_Chain

II) Neutron Attenuation Measurements

Discriminator Dual Pulsing Investigation

CH Discriminator Dual Pulsing

Initial Measurements

CH He3 Attenuation Measurements

Revisited Measurements

CH He3 Attenuation Measurements: 3 Different Cf252 Sources

III) CaGaS Phase I Expansion

CaGaS Phase I Gadolinium

CaGaS Phase I Cadmium

IV) HPGe Measurements

PAS HPGe Detector

CH HPGe Efficiency

Previous Work

CaGaS Phase I

Useful Resources

CH ROOT Nonuniform Binning

CH_PAS_Master_Logbook

CH_Isotope_Table

CH_Reading_CODA_Data

CH NIM Bin Repair

Previous Page

PAS Experiment

Retrieved from "https://wiki.iac.isu.edu/index.php?title=CaGaS_Phase_II&oldid=128877"