Difference between revisions of "BriansRanLogbook"

From New IAC Wiki
Jump to navigation Jump to search
Line 36: Line 36:
 
|+ He3 Counts vs Voltage (1208 HV)
 
|+ He3 Counts vs Voltage (1208 HV)
 
|-
 
|-
! Discriminator Voltage (V) !! Counts/10s (with source) !! Counts/10s (no source)
+
! Discriminator Voltage (V) !! Counts/10s (no source) !! Counts/10s (with source)
 
|-
 
|-
 
| 2.003 || 4.4 ± 1.67 || 97.0 ± 8.49
 
| 2.003 || 4.4 ± 1.67 || 97.0 ± 8.49
Line 60: Line 60:
 
|+ He3 Counts vs Voltage (1100 HV)
 
|+ He3 Counts vs Voltage (1100 HV)
 
|-
 
|-
! Discriminator Voltage (V) !! Counts/10s (with source) !! Counts/10s (no source)
+
! Discriminator Voltage (V) !! Counts/10s (no source) !! Counts/10s (with source)
 
|-
 
|-
 
| 1.971 || 4.6 ± 2.37 || 107.7 ± 13.17
 
| 1.971 || 4.6 ± 2.37 || 107.7 ± 13.17
Line 80: Line 80:
 
|+ He3 Counts vs Voltage (1300 HV)
 
|+ He3 Counts vs Voltage (1300 HV)
 
|-
 
|-
! Discriminator Voltage (V) !! Counts/10s (with source) !! Counts/10s (no source)
+
! Discriminator Voltage (V) !! Counts/10s (no source) !! Counts/10s (with source)
 
|-
 
|-
 
| 1.971 || 5.4 ± 1.78 || 111.3 ± 9.97
 
| 1.971 || 5.4 ± 1.78 || 111.3 ± 9.97

Revision as of 21:46, 24 February 2023

This is where I write down what I'm doing


1/13/23 : Turned on HpGe HV to 1500 and learned about analog to digital signal processing


detected signal rate -vs- HpGe Voltage

HpGe Detector

HPGe Counts vs Voltage Cs-137 Source
High Voltage (V) Counts (with source) Counts (no source)
1492.67 1532.5 ± 36.67 167.5 ± 7.78
799.15 1336.5 ± 2.12 149.4 ± 34.65
396.83 1193.5 ± 54.48 127.5 ± 7.78
197.19 1035.5 ± 40.31 121 ± 4.24
4.88 562.5 ± 2.12 332 ± 35.36
HpGe Detector Voltage vs Counts graph.jpg

He3 Tube

1/27/23 : Turned on He3 detector, adjusted to find counts with Cf source in containment and out of containment

2/3/23 : Same as 1/27, adjusting discriminator voltage and recording counts with Cf-252 source. Encountered strange effects of higher counts with source away at low QD voltage. Sets of measurements notably inconsistent.

He3 Counts vs Voltage (1208 HV)
Discriminator Voltage (V) Counts/10s (no source) Counts/10s (with source)
2.003 4.4 ± 1.67 97.0 ± 8.49
1.788 4.8 ± 1.09 108.2 ± 10.89
1.503 5.4 ± 2.22 105.7 ± 8.63
1.227 7.9 ± 3.14 109.8 ± 9.34
1.009 89.9 ± 7.87 234.1 ± 20.06
0.799 2656 ± 251.1 2447 ± 183.0
0.485 55479 ± 1325 48360 ± 1938

2/10/23 Same procedure as 2/3/23, just changing HV applied to He3 detector to values of 1300V then 1100V.


He3 Counts vs Voltage (1100 HV)
Discriminator Voltage (V) Counts/10s (no source) Counts/10s (with source)
1.971 4.6 ± 2.37 107.7 ± 13.17
1.775 7.7 ± 2.11 100 ± 10.70
1.486 5.5 ± 2.32 104.8 ± 12.79
1.248 4.7 ± 2.00 99.6 ± 7.09
1.013 75.2 ± 12.17 171 ± 12.82
0.762 3074 ± 143.0 2833 ± 894.7
0.509 19658 ± 424.6 40290 ± 2402
He3 Counts vs Voltage (1300 HV)
Discriminator Voltage (V) Counts/10s (no source) Counts/10s (with source)
1.971 5.4 ± 1.78 111.3 ± 9.97
1.773 5.3 ± 1.89 97.3 ± 7.70
1.524 7.1 ± 4.51 99.7 ± 11.78
1.275 12.2 ± 3.55 117.3 ± 23.11
0.993 177.7 ± 8.18 351.9 ± 28.71
0.784 2691.2 ± 114.7 2763.7 ± 126.2
0.485 50346 ± 3831 53920 ± 4354