Difference between revisions of "2nCor Equipment"

From New IAC Wiki
Jump to navigation Jump to search
Line 35: Line 35:
 
| Detector || TDC channel || NIM-ECL channel|| Patch Pannel #  
 
| Detector || TDC channel || NIM-ECL channel|| Patch Pannel #  
 
|-
 
|-
| || || ||   
+
| BLUT || TDC16 || in A ch 0 || A6    
 
|-
 
|-
|     || || ||  
+
|   || || ||  
 
|-
 
|-
 
| || || ||  
 
| || || ||  

Revision as of 16:47, 16 March 2015

Detectors

PMTs

http://www.hamamatsu.com/resources/pdf/etd/R580_TPMH1100E.pdf

Scintillators

e+e- spectrometer

DAQ electronics

Signal Processing

Discriminator

CAEN N841


The pulse forming stage of the discriminator produces an output pulse whose width is adjustable in a range from 5 ns to 40 ns. Each channel can work both in Updating and Non-Updating mode according to on-board jumpers position. The discriminator thresholds are individually settable in a range from -1 mV to -255 mV (1 mV step), via an 8-bit DAC. The minimum detectable signal is -5 mV. The back panel houses VETO and TEST inputs, the OR output and the Current Sum output, which generates a current proportional to the input multiplicity, i. e. to the number of channels over threshold, at a rate of -1.0 mA per hit (-50 mV per hit into a 50 Ohm load) ±20%.

File:CAEN N841 Manual.pdf

NIM-ECL converter

Phillips Model 726

File:Phillip 726 Nim2ECL.pdf

TDC

TDC channel Map
Detector TDC channel NIM-ECL channel Patch Pannel #
BLUT TDC16 in A ch 0 A6

ADC

2nCor_44