20min run peak sensing histograms
Revision as of 17:22, 26 October 2014 by Abdehait (talk | contribs) (→Cathode Voltage Effect on the Peak sensing Spectrum)
Cathode Voltage Effect on the Peak sensing Spectrum
All the measurements have the same GEM voltage 2.87 kV, just cathode voltage changes.
the figure below shows the the spectrum when the cathode at 3.735 kV, which reaches to the maxmum rate that DAQ can measure.
GEM-2.87 kV CATH-3.435 kV
Test runs
GO BACK [1]