20min run peak sensing histograms
Revision as of 15:44, 25 October 2014 by Abdehait (talk | contribs) (→Cathode Voltage Effect on the Peak sensing Spectrum)
Cathode Voltage Effect on the Peak sensing Spectrum
All the measurements have the same GEM voltage 2.87 kV, just cathode voltage changes.
| Date | CATH. Voltage (kV) | V | Shutter | source | run number | Notes |
| 10/23 | 2.870 | 0 | Open | off | 7916 | 3h 45min |
| 10/23 | 2.870 | 0 | Closed | off | 7917 | 12h 12min |
| 10/23 | 2.995 | 125 | Open | off | 7912 | |
| 10/23 | 2.995 | 125 | Closed | off | 7913 | |
| 10/25 | 3.050 | Open | off | 7920 | 100px | |
| 10/25 | 3.030 | Open | off | 7921 | ||
| 10/25 | 3.000 | Open | off | 7923 | ||
| 10/23 | 3.120 | 250 | Open | off | 7899 | |
| 10/23 | 3.120 | 250 | Closed | off | 7900 | |
| 10/23 | 3.245 (redo) | 375 | Open | off | 7904 | |
| 10/23 | 3.245 | 375 | Closed | off | 7905 | |
| 10/23 | 3.370 | 500 | Open | off | 7908 (22') | |
| 10/23 | 3.370 | 500 | Closed | off | 7909 |
GEM-2.87 kV CATH-3.435 kV
Test runs
GO BACK [1]