Rotating Tungsten Target System

From New IAC Wiki
Jump to navigation Jump to search

Parts

HRRL Beam Rot Tar Sys Mot1.png HRRL Beam Rot Tar Sys Mot11.png HRRL Beam Rot Tar Sys Mot7.png HRRL Beam Rot Tar Sys Mot16.png

[More Images ]


Rotating Union

HRRL Pos Rotating W Target Sys Parts Roter 1.jpg HRRL Pos Rotating W Target Sys Parts Roter 2.jpg HRRL Pos Rotating W Target Sys Parts Roter 3.jpg HRRL Pos Rotating W Target Sys Parts Roter 4.jpg HRRL Pos Rotating W Target Sys Parts Roter 5.jpg HRRL Pos Rotating W Target Sys Parts Roter 6.jpg

Positron Target Box

Hrrl e+ Target area Space.png


The pipe that go through quads has inner diameter: 47.38 * mm

STR8 - Step Motor Drives

Document

STR8 Documents

STR8 Manuals:

Media:STR_Hardware_Manual.pdf

Media:STR_Quick_Setup_Guide.pdf

Datasheet:

Media:STR_Brochure_925-0002_RevC.pdf

2D Drawing:

Media:STR4_8_drawing.pdf

Media:ST4_8_simple_3D.pdf

Speed-Torque Curves:

Media:STR_speed-torque.pdf

Features

Low cost, digital step motor driver in compact package•

Operates from Step & Direction signals or Step CW & Step CCW (jumper selectable)•

Enable input•

Fault output•

Optically isolated I/O•

Digital filters prevent position error from electrical noise on command signals•

Jumper selectable: 150 kHz or 2 MHz•

Rotary switch easily selects from many popular motors•

Electronic damping and anti-resonance•

Automatic idle current reduction to reduce heat when motor is not moving•

Switch selectable: 50% or 90% of running current•

Switch selectable step resolution: 200 (full step), 400 (half step), 2000, 5000, 12800 or • 20000 steps/rev

Switch selectable microstep emulation provides smoother, more reliable motion in full and • half step modes

Automatic self test (switch selectable)

Operates from a 24 to 75 volt DC power supply

Running current up to 7.8 amps per phase