2012AnnihCountrRateEstimate
Rate Estimates
Previous experiment at the IAC
| border="3" cellpadding="20" cellspacing="0"
| 
|| 
| 
|-
| If all Homework is complete and Simulation project is turned in on time || (50%) Homework + (50%)(Simulation Project)
|-
| If 1 homework set is incomplete or more than 48 hours late || (60%)Homework + (40%)(Simulation Project)
|-
|Otherwise ||(70%)Homework + (30%)(Simulation Project)
|-
|}
| border="3" cellpadding="20" cellspacing="0" | Condition || Grade Calculation |- | If all Homework is complete and Simulation project is turned in on time || (50%) Homework + (50%)(Simulation Project) |- | If 1 homework set is incomplete or more than 48 hours late || (60%)Homework + (40%)(Simulation Project) |- |Otherwise ||(70%)Homework + (30%)(Simulation Project) |- |}
NaI rate Ratio of positron to electron beam
Assumed Geometry
Assume a 2 mm thick Tungsten target that is 1" square
The target is located at -80 < Z < -80.2 The NaI crystal is 2.32" or 56.49 mm in diameter The NaI crystal is 8" from the target then the opening angle is atan(2.32/8/2) = 8.25 degrees