HRRL 7-30-09
Default HRRL running Conditions
| Pulse Width | Rep Rate | Energy | |
| 8 mA | 25 ns | 1 Hz | 3 MeV |
cable names
| CH ID | Description |
| 2223A1 | Front Scintillator |
| 2223A2 | Rear Scintilaltor |
| 2223A3 | |
| 2223A4 | |
| 2223A5 | Plastica sense wire 4 |
| 2223A6 | Metalica sense wire 5 |
| 2223A7 | |
| 2223A8 | |
| 2223A9 | |
| 2223A10 | Front scintillator to ADC |
| 2223A11 | |
| 2223A12 |
HV Cables on DCs: Sense-A2, Guard-A3 and Field-A4
HV cables on scintillators: Front && rear PMTs-A8. Hv settings 1150 Volts(works). In counting room front-A1(BNC) and rear-A2(BNC).
Plan: A3 should be gate. A4 - Start for TDC. A12-trigger.
HV Settings on drift chambers S:F:G=1400:-700:980
Setup TIming
Accelerator sends the Gun gate to HRRL counting room on channel BM
The accelerator Gun gate starts our Stanford pulse generator.
- The Stanford pulse generator outputs 2 pulses
- one pulse is for the ADC gate and G1 trigger for V1495
- The second pulse create a trigger for the DAQ