VFAT board mirror
Jump to navigation
Jump to search
The prototype VFAT breakout board has the A and B sides switched on the PCB. For the final board this will need to be fixed, but for the run on the HRRL we need a mitigating strategy. Basically we need to switch each pair of cables to be correct or adjust otherwise.
Ribbon cable pinouts
| # | VFAT pin # |
Name | Value | Test rig color Primary/Second (main color/smaller color) |
mirror strategy |
| B1 | DGND | Digital Ground | Black/Grey (shared) | Switch the DGND and DVDD traces along the bottom | |
| A1 | DVDD | +2.5V | Red/Grey (shared) | Switch the DGND and DVDD traces along the bottom | |
| B2 | 168 | SDA | I2C Data | Green/Yellow | Switch the SDA and SCL wires coming onto board |
| A2 | 167 | SCL | I2C Clock | Yellow/Green | Switch the SDA and SCL wires coming onto board |
| B3 | DGND | Digital Ground | Black/Grey (shared) | Switch the DGND and DVDD traces along the bottom | |
| A3 | DVDD | +2.5V | Red/Grey (shared) | Switch the DGND and DVDD traces along the bottom | |
| B4 | 162 | DACo-V | DAC output Volt | No Connection | Not used in this experiment |
| A4 | 163 | DACo-I | DAC output Current | No Connection | Not used in this experiment |
| B5 | 164 | I2C ADDR 2 | I2C Address Most | White/Blue | Adjust in software/i2c address selector |
| A5 | 165 | I2C ADDR 1 | I2C Address Middle | White/Orange | Adjust in software/i2c address selector |
| B6 | 166 | I2C ADDR 0 | I2C Address Least | White/Green | Cut trace and wire appropriately |
| A6 | 169 | REsB | Soft Reset (Program saved) | White/Grey | Wire to Vcc |
| B7 | 170 | ForceRehOff | ?? bond to grnd | No Connection | Use hard reset pin to set to correct value |
| A7 | 171 | REhB | Hard Reset | Grey/White | Bridge to A6 (soft reset/Vcc) |
| B8 | 173 | MCLKB (-) | Orange/Purple | Reverse LVDS wire/signal | |
| A8 | 174 | MCLK (+) | Purple/Orange | Reverse LVDS wire/signal | |
| B9 | 175 | T1B (-) | Green/Purple | Reverse LVDS wire/signal | |
| A9 | 176 | T1 (+) | Purple/Green | Reverse LVDS wire/signal | |
| B10 | 177 | ScanOut | Brown/Purple | Reverse LVDS wire/signal | |
| A10 | 178 | ScanIn | Purple/Brown | Reverse LVDS wire/signal | |
| B11 | 180 | DataValidB (-) | Grey/Purple | Reverse LVDS wire/signal | |
| A11 | 181 | DavaValid (+) | Purple/Grey | Reverse LVDS wire/signal | |
| B12 | 182 | DataOutB (-) | Blue/Black | Reverse LVDS wire/signal | |
| A12 | 183 | DataOut (+) | Black/Blue | Reverse LVDS wire/signal | |
| B13 | 184 | SB8 (-) | Orange/Black | Not used on breakout board | |
| A13 | 185 | S8 (+) | Black/Orange | Not used on breakout board | |
| B14 | 186 | SB7 (-) | Green/Red | Not used on breakout board | |
| A14 | 187 | S7 (+) | Red/Green | Not used on breakout board | |
| B15 | 188 | SB6 (-) | Orange/Red | Not used on breakout board | |
| A15 | 189 | S6 (+) | Red/Orange | Not used on breakout board | |
| B16 | 190 | SB5 (-) | Blue/Red | Not used on breakout board | |
| A16 | 191 | S5 (+) | Red/Blue | Not used on breakout board | |
| B17 | 192 | SB4 (-) | Grey/Yellow | Not used on breakout board | |
| A17 | 193 | S4 (+) | Yellow/Grey | Not used on breakout board | |
| B18 | 194 | SB3 (-) | Brown/Yellow | Not used on breakout board | |
| A18 | 195 | S3 (+) | Yellow/Brown | Not used on breakout board | |
| B19 | 196 | SB2 (-) | Orange/Yellow | Not used on breakout board | |
| A19 | 197 | S2 (+) | Yellow/Orange | Not used on breakout board | |
| B20 | 198 | SB1 (-) | Blue/Yellow | Not used on breakout board | |
| A20 | 199 | S1 (+) | Yellow/Blue | Not used on breakout board | |
| B21 | DGND | Digital Ground | No Connection | Switch the DGND and DVDD traces along the bottom | |
| A21 | DVDD | +2.5V | No Connection | Switch the DGND and DVDD traces along the bottom | |
| B22 | DGND | Digital Ground | No Connection | Switch the DGND and DVDD traces along the bottom | |
| A22 | 179 | ScanEn | Scan Mode Enable | No Connection | |
| B23 | AGND | Analog Ground | No Connection | Switch AGND and AVDD wires coming onto board | |
| A23 | AVDD | 2.5V | Grey/Red | Switch AGND and AVDD wires coming onto board | |
| B24 | AGND | Analog Ground | Grey/Black | Switch AGND and AVDD wires coming onto board | |
| A24 | AVDD | 2.5V | Grey/Red | Switch AGND and AVDD wires coming onto board | |
| B25 | AGNDD | Analog Ground | Grey/Black | Switch AGND and AVDD wires coming onto board | |
| A25 | AVDD | 2.5V | Grey/Red | Switch AGND and AVDD wires coming onto board |