Kalyan 30 May 08

From New IAC Wiki
Jump to navigation Jump to search

Case 1

The constraints are as follows The Triangular sections are only constrained on the downstream side and the nose plate is constrained on the upstream side

The report generated by ANSYS is available: File:Case1 slice1.pdf


Case1 slice1left 1d.png Case1 slice1 1d.png Case1 slice1right 1d.png
Case1 slice1 1x.png Case1 slice1 1y.png Case1 slice1 1z.png

Figure 1: Images of Deflection for Sector 1 with case 1 constraints in D,X,Y,Z Directions respectively

Case 2

The constraints are as follows The Triangular sections are only constrained on the downstream side and the nose plate is constrained on both sides

The report generated by ANSYS is available: File:Case2 slice1.pdf


Case2 slice1left 1d.png Case2 slice1 1d.png Case2 slice1right 1d.png
Case2 slice1 1x.png Case2 slice1 1y.png Case2 slice1 1z.png

Figure 2: Images of Deflection for Sector 1 with case 2 constraints in D,X,Y,Z Directions respectively

Case 3

The constraints are as follows The Triangular sections are only constrained on the upstream side and the nose plate is constrained on the upstream side

The report generated by ANSYS is available: File:Case3 slice1.pdf


Case3 slice1left 1d.png Case3 slice1 1d.png Case3 slice1right 1d.png
Case3 slice1 1x.png Case3 slice1 1y.png Case3 slice1 1z.png

Figure 1: Images of Deflection for Sector 1 with case 3 constraints in D,X,Y,Z Directions respectively

Case 4

The constraints are as follows The Triangular sections are only constrained on the upstream side and the nose plate is constrained on both sides

The report generated by ANSYS is available: File:Case4 slice1.pdf


Case4 slice1left 1d.png Case4 slice1 1d.png Case4 slice1right 1d.png
Case4 slice1 1x.png Case4 slice1 1y.png Case4 slice1 1z.png

Figure 1: Images of Deflection for Sector 1 with case 4 constraints in D,X,Y,Z Directions respectively

Case 5

The constraints are as follows The Triangular sections are only constrained on both sides and the nose plate is constrained on the upstream side

The report generated by ANSYS is available: File:Case1 slice1.pdf


Case1 slice1left 1d.png Case1 slice1 1d.png Case1 slice1right 1d.png
Case1 slice1 1x.png Case1 slice1 1y.png Case1 slice1 1z.png

Figure 1: Images of Deflection for Sector 1 with case 1 constraints in D,X,Y,Z Directions respectively

Case 6

The constraints are as follows The Triangular sections and the nose plate are constrained on both sides

The report generated by ANSYS is available: File:Case1 slice1.pdf


Case1 slice1left 1d.png Case1 slice1 1d.png Case1 slice1right 1d.png
Case1 slice1 1x.png Case1 slice1 1y.png Case1 slice1 1z.png

Figure 1: Images of Deflection for Sector 1 with case 1 constraints in D,X,Y,Z Directions respectively



Go back to PROGRESS REPORTS

Go back to R3