MINIDC MinVoltageStudy
Operating Voltage Study
We will lower the operating voltage and take scope pictures to determine the operating point for the mini chamber.
| Sevse Wire | Sense Wire HV (Volts) | Field Wire HV (Volts) |
| 1 | ||
| 2 | 1685 | -845 |
| 3 | 1675 | -840 |
| 4 | 1685 | -845 |
| 5 | 1675 | -840 |
| 6 | 1655 | -830 |
| 7 | 1685 | -845 |
SenseWire 1
Preamplifier voltage was set to 5.9 Volts.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1700 | -850 | 
|
| 1695 | -845 | 
|
| 1685 | -840 | 
|
| 1675 | -835 | 
|
| 1665 | -830 | 
|
| 1655 | -825 | 
|
Sense wire 2
Preamplifier voltage was set to 5.9 Volts. We saw a lot of noise ( 40 mV peak to peak) when increasing the preamp voltage from 2.2 V to 5.7 Volts. After 5.7 volts the noise went back to a noise level of 8 mV peak to peak which is smaller than the 16 mV peak to peak noise observed 3 days ago on the sense wire (capacitor side)before the preamp.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1705 | -855 | 
|
| 1695 | -850 |   
|
| 1685 | -845 |   
|
| 1675 | -840 |   
|
| 1665 | -835 |  
|
| 1655 | -830 | 
|
SenseWire 3
Preamplifier voltage was set to 5.9 Volts.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1705 | -855 | 
|
| 1695 | -850 | 
|
| 1685 | -845 | 
|
| 1675 | -840 | 
|
| 1665 | -836 | 
|
| 1655 | -831 | 
|
| 1645 | -826 |  
|
| 1635 | -820 |  
|
SenseWire 4
Preamplifier voltage was set to 5.9 Volts.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1705 | -855 | 
|
| 1695 | -850 | 
|
| 1685 | -845 | 
|
| 1675 | -840 | 
|
| 1665 | -835 | 
|
SenseWire 5
Preamplifier voltage was set to 5.9 Volts.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1705 | -855 | 
|
| 1695 | -850 | 
|
| 1685 | -845 |  
|
| 1675 | -840 |  
|
| 1665 | -835 | 
|
SenseWire 6
Preamplifier voltage was set to 5.9 Volts.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1705 | -855 |  
|
| 1695 | -850 |  
|
| 1685 | -845 |  
|
| 1675 | -840 |  
|
| 1665 | -835 |  
|
| 1655 | -830 |   
|
| 1645 | -825 | 
|
SenseWire 7
Preamplifier voltage was set to 5.9 Volts.
| Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
| 1705 | -855 |   
|
| 1695 | -850 |  
|
| 1685 | -845 |   
|
| 1675 | -840 |   
|
| 1665 | -835 |   
|
| 1655 | -830 |   
|
| 1645 | -825 |   
|