IAC-Peak Sensing Measurements
Jump to navigation
Jump to search
09/05/13
Detector voltage is 2.8, 3.4 kV for cathode and GEM.
| Run Number | Notes | |
| 5869 | shutter open x | |
| 5872 | shutter close x | |
| 5873 | shutter open x | |
| 5876 | shutter open x | |
| 5877 | shutter close x | |
| 5884 | shutter close 1 | 
|
| 5885 | shutter open 1 | 
|
| Run Number | Amp level | discriminator level | Notes | |
| 5925 | 50, 4 | 3.6 | shutter close | |
| 5926 | 50, 4 | 3.6 | shutter open | |
| 5927 | 100 | 3.6 | shutter open | |
| 5928 | 200 | 3.6 | shutter open, high amp level | |
| 5929 | 100, 10 | 3.6 | shutter open high amp level | |
| 5930 | 100, 7 | 3.6 | shutter open | |
| 5936 | 100, 7 | 0.1 | shutter open, noise peak channel 74 | |
| 5937 | 100, 7 | 0.1 | shutter open, V_cath = V_GEM,noise peak channel 74 | |
| 5948 | 100, 7 | 1.15 | shutter open, detector is on, no signal overlapping, reached to te signal highest rate, with almost 100% signal to noise ratio. |
The following run has the same setting as the last run, unless there is achange written in the notes.
Cath_3400 GEM_2800V
| Run Number | start time | end time | time difference | Unix Start time | Unix End time | Unix Time diff | Scaler time | shutter | Notes |
| 5948 | 14:22:14 | 14:36:09 | 00:13:55 | 20:22:14 | 20:36:07 | 00:13:53 | 305,502 | open | scalar time does not match the others |
| 5949 | 15:02:43 | 15:19:59 | 00:17:16 | 21:02:43 | 21:19:56 | 00:17:13 | 377,148 | open | scalar time does not match the others |
| 5950 | 15:20:42 | 15:35:07 | 00:14:25 | 21:20:42 | 21:35:04 | 00:14:22 | open | r5951 and r5952 has the shutter close and integrate 1 | |
| 5951 | 22:41:29 | 22:08:12 | 00:32:47 | close | |||||
| 5952 | 22:12:44 | 22:35:34 | 00:22:50 | close | |||||
| 5953 | 16:37:03 | 15:35:07 | 00:02:04 | 22:37:03 | 22:45:38 | 00:07:35 | close | integrate lower from 1 to 0.5,sthg strange happened, root does not show a picture and the rate increased suddenly to 450 Hz | |
| 5957 | 09:01:07 | 09:25:12 | 00:24:05 | 15:01:07 | 15:25:10 | 00:24:03 | open | integrate 0.5 | |
| 5959 | 09:30:21 | 09:55:15 | 00:24:53 | 15:30:21 | 15:55:12 | 00:24:50 | close | integrate 1 |
Cath_3350 GEM_2750V
| Run Number | start time | end time | time difference | Unix Start time | Unix End time | Unix Time diff | shutter | Notes |
| 5960 | 09:58:42 | 10:30:28 | 00:31:46 | 15:58:42 | 16:30:25 | 00:31 :43 | close | |
| 5961 | 10:30:49 | 11:11:50 | 41'01" | 16:30:49 | 17:11:47 | 40' 58" | close | |
| 5962 | 11:13:03 | 11:28:21 | 15'18" | 17:13:03 | 17:28:18 | 15' 15" | close | |
| 5963 | 11:32:44 | 11:58:39 | 25' 55" | 17:32:43 | 17:58:37 | 25' 52" | open | |
| 5964 | 11:59:17 | 12:21:59 | 22' 42" | 17:59:17 | 18:21:56 | 22' 39" | open | |
| 5965 | 12:22:24 | 12:42:38 | 20'14" | 18:22:24 | 18:42:36 | 20' 12" | open |
|
Cath_3300 GEM_2700V
| Run Number | start time | end time | shutter | Notes |
| 5967 | 19:22:05 | 19:48:42 | open | scaler not counting Hz pulse (run 5976 was counting) |
| 5968 | 19:49:04 | 20:15:44 | open | |
| 5969 | 20:15:44 | 20:47:18 | open | |
| 5978 | 11:33:33 | 11:48:05 | close | |
| 5979 | 11:48:27 | 11:59:49 | close | |
| 5980 | 12:00:17 | 12:31:03 | close |
|
Cath_3250 GEM_2650V
| Run Number | start time | end time | shutter | Notes |
| 5972 | 20:52:15 | 21:15:18 | open | |
| 5973 | 06:43:29 | 07:29:57 | open | |
| 5974 | 07:30:49 | 08:17:48 | open | |
| 5975 | 08:23:58 | 09:30:48 | close | |
| 5976 | 09:33:58 | 10:42:48 | close | |
| 5977 | 10:43:11 | 11:31:26 | close |
|
Cath_3200 GEM_2600V
| Run Number | start time | end time | shutter | Notes |
| 5983 | 17:42:06 | 22:07:02 | close | |
| 5984 | 17:42:06 | 06:43:46 N | close | very low noise level |
| 5985 | 06:44:44 | 12:10:48 | close | |
| 5986 | 12:14:53 | 12:59:45 | open | |
| 6047 | 18:44:41 | 21:21:49 | open |
|
Cath_3150 GEM_2550V
| Run Number | start time | end time | shutter | Notes |
| 5954 | 16:55:52 | 08:44:23 N | close | integrate 1 rate changed from 1.2 Hz to 57 Hz due to increase the noise level overnight only. |
| 5966 | 12:44:21 | 19:15:35 | open |