Kalyan 30 May 08
Case 1
The constraints are as follows The Triangular sections are only constrained on the downstream side and the nose plate is constrained on the upstream side
The report generated by ANSYS is available: File:Case1 slice1.pdf
|
 |
 |
|
Figure 1: Images of Deflection for Sector 1 with upstream carbon rods and Single rear carbon rod of diameter 3 inches and 0.3 inch thk in D,X,Y,Z Directions respectively
Case 2
The constraints are as follows The Triangular sections are only constrained on the downstream side and the nose plate is constrained on both sides
Case 3
The constraints are as follows The Triangular sections are only constrained on the upstream side and the nose plate is constrained on the upstream side
Case 4
The constraints are as follows The Triangular sections are only constrained on the upstream side and the nose plate is constrained on both sides
Case 5
The constraints are as follows The Triangular sections are only constrained on both sides and the nose plate is constrained on the upstream side
Case 6
The constraints are as follows The Triangular sections and the nose plate are constrained on both sides