CAEN V260 Scalr
Jump to navigation
Jump to search
Setting address
The address pins on this module are not labeled so I adopted the convention of numbering them from left to right as I look from the front pannel.
| Address | |
| Pin | Setting |
| SW 1 | D |
| SW 2 | A |
| SW 3 | 0 |
| SW 4 | 0 |
Initializing from ROC console
The V260 library has an initialization function called v260Init to use for getting a pointer to its VME memory location. The scaler uses A24 bit addressing so you need to add 2 zeros at the end.
-> v260Init 0xda0000 Initialized SCALER ID 0 at address 0x90da0000 value = 0 = 0x0
Status function
-> v260Status(0,1)
STATUS for SCALER id 0 at base address 0x90da0000
--------------------------------------------------
Version = 0x10dc Module Type = 0x080d
Scalers ENABLED
Scaler Data :
SCAL01: 0 SCAL02: 0 SCAL03: 0 SCAL04: 0
SCAL05: 0 SCAL06: 0 SCAL07: 0 SCAL08: 0
SCAL09: 0 SCAL10: 0 SCAL11: 0 SCAL12: 0
SCAL13: 0 SCAL14: 0 SCAL15: 0 SCAL16: 28
value = 0 = 0x0