7/04/13

Clean room HVAC Low temperature alarm went off. Charts show that at 4am the temperature started dropping from 68 to 66 at noon.

Changed set point from 67 to 68.

The temperature monitor indicates that the temperatures went back to 70 degrees by 8pm.

crimpers are gapped at 0.03" (0.765 mm) every hour

7/08/13

Dion: String S3 with Debbie, taking afternoon off

Haitham: String S2 with David

David: String S2 with Haitham, install octopus on S5 SL2 and start HV burn in

Debbie: String S3 with Dion

Carlos: wire tension measurments, work on analyzing data to determine efficiency

S2: on Sense wire row 109

S3: on Sense wire row 163

S5, guard, crimped part was 0.043", uncrimped pin 0.065 ".

Dion: String S3 with Debbie

Haitham: String S2 with David

David: String S2 with Haitham,

Debbie: String S3 with Dion, debbie off in the morning

Carlos: wire tension measurements, work on analyzing data to determine efficiency

S2: on Sense wire row 130

S3: on Sense wire row 182

other tasks: summary table of S6 signals (which wires are hot,...)