DeltaDoverD Progress
TD_Ddoverd_2008
TD_Ddoverd_2009
TD_Ddoverd_2010
TD_Ddoverd_2011
2/10/2010
root file | reaction | W vs | # events for <1.232 | ||||
1 | B<0, pi^-=27 && e^-=11 | 9868 | |||||
2 | B>0, pi^+=27 && e^-=11 | 412 | |||||
3 | B>0, pi^+=27 && e^-=7 | 793 | |||||
4 | B>0, pi^-=7 && e^-=11 | 400 | |||||
5 | B<0, pi^+=7 && e-=11 | 9406 |
Rate differences
Which paddle do we expect the Pion to hit if we flip the direction of the B-Field?
Only using Certain Paddles
or
Looking at Ratio_3 and Ratio_4 one can make a conclusion that we are detecting ~ % more type hadrons.
Choosing events Below 1.232 GeV && Certain paddle numbers
22-02-2010
- NH3 Target, two file lists: NH3Bn.list (B<0, 26994-26983) && NH3Bp.list (B>0, 27074-27079)
no paddle cuts
- A.) B>0
1.) B>0,
&& , NH3Bp1_1.root2.) B>0,
&& , NH3Bp2_1.root- B.) B<0
1.) B<0,
&& , NH3Bn1_1.root2.) B<0,
&& , NH3Bn2_1.root
Paddle Cuts
Again, choosing events below 1.232 GeV, applying cuts, and plotting Histograms for certain electron and pion paddles.
_vs_ , , Fcup && .
- A.) B>0
1.) B>0,
&& , NH3Bp1.root2.) B>0,
&& , NH3Bp2.root- B.) B<0
1.) B<0,
&& , NH3Bn1.root2.) B<0,
&& , NH3Bn2.rootFile | W vs | |||
NH3Bp1.root | 200px | |||
NH3Bp2.root | 200px | |||
NH3Bn1.root | 200px | |||
NH3Bn2.root | 200px |
Now you need to cut on. The above suggests that looking at 1 < < 2 GeV/c^2 may be a good starting point.
The idea is to compare the outbending (B<0)
rate in paddle 27 to the inbending(B>0) rate in paddle 7 when 1 < < 2. For the same kinematics the rates should be the same because the reaction is the same. Do the same for to see if it is consistent. This will show much flipping the magnet polarity impacts the rate measurement. Are the differences due to the B-field change or the scintillator efficiency, or to the track reconstruction? Our goal is to argue that the detector has the same efficiency for detecting and in the same scintillator when the Torus B-field direction is flipped.1 < < 2
File | W vs | ||
NH3Bp1.root | 200px | ||
NH3Bp2.root | 200px | ||
NH3Bn1.root | 200px | ||
NH3Bn2.root | 200px |
bin | Bp1/Bn1 | Bp2/Bn2 |
0.1 | 2.38 | 0.2991.09 | 0.405
0.2 | 1.29 | 0.1883.59 | 0.215
0.3 | 1.38 | 0.2424.6 | 0.284
0.4 | 1.62 | 1.023.76 | 1.28
Angle vs Paddle Number Distribution
# | angle vs paddle number | angle vs paddle number |
B>0, | &&||
B>0, | &&||
B<0, | &&||
B<0, | &&
26/04/2010
NH3Bn positive pion runs
7.root - 27.root
pion paddle number | x_bj=0.1 | x_bj=0.2 | x_bj=0.3 | x_bj=0.4 |
1 | 10 | 3.1638 | 6.1620 | 4.472 | 1.4
2 | 14 | 3.760 | 7.728 | 5.30 |
3 | 20 | 4.593 | 9.648 | 6.93 | 1.7
4 | 26 | 5.187 | 9.353 | 7.35 | 2.2
5 | 24 | 4.994 | 9.742 | 6.56 | 2.4
6 | 30 | 5.5125 | 1.179 | 8.97 | 2.6
8 | 16 | 4102 | 1065 | 8.14 | 2
9 | 19 | 4.396 | 9.848 | 6.93 | 1.7
10 | 23 | 4.898 | 9.957 | 7.52 | 1.4
11 | 16 | 471 | 8.438 | 6.22 | 1.4
12 | 20 | 4.585 | 9.253 | 7.36 | 2.5
13 | 13 | 3.673 | 8.542 | 6.55 | 2.2
14 | 19 | 4.375 | 8.738 | 6.23 | 1.7
15 | 15 | 3.962 | 7.925 | 52 | 1.4
16 | 22 | 4.758 | 7.642 | 6.50 |
17 | 5 | 2.240 | 6.323 | 4.84 | 2
18 | 10 | 3.233 | 5.718 | 4.22 | 1.4
19 | 7 | 2.627 | 5.221 | 4.51 | 1
20 | 3 | 1.734 | 5.813 | 3.60 |
21 | 3 | 1.716 | 49 | 30 |
22 | 2 | 1.410 | 3.22 | 1.40 |
23 | 0 | 2 | 1.43 | 1.71 | 1
24 | 0 | 1 | 11 | 10 |
NH3Bp positive pion runs
#p.root
pion paddle number | x_bj=0.1 | x_bj=0.2 | x_bj=0.3 | x_bj=0.4 |
4 | 21 | 4.615 | 3.92 | |
5 | 39 | 58 | 18 | |
6 | 56 | 91 | 49 | |
7 | 90 | 110 | 82 | 5 |
8 | 81 | 155 | 78 | 3 |
9 | 68 | 8.1139 | 1285 | 9.24 | 2
10 | 83 | 9.1181 | 1388 | 9.48 | 2.8
11 | 102 | 10164 | 1396 | 9.88 | 2.8
12 | 103 | 10.1188 | 13.7122 | 118 | 2.8
13 | 85 | 9.2203 | 14.2132 | 11.516 | 4
14 | 105 | 10.2219 | 14.8120 | 10.911 | 3.3
15 | 116 | 10.8192 | 13.8113 | 10.68 | 2.8
16 | 91 | 9.5208 | 14.4134 | 11.69 | 3
17 | 98 | 9.9187 | 13.7112 | 10.69 | 3
18 | 106 | 10.3159 | 12.6121 | 117 | 2.6
19 | 91 | 9.5166 | 12.9107 | 10.39 | 3
20 | 83 | 9.1138 | 11.790 | 9.57 | 2.6
21 | 81 | 9167 | 12.9110 | 10.511 | 3.3
22 | 87 | 9.3164 | 12.884 | 9.25 | 2.2
23 | 77 | 8.898 | 9.973 | 8.56 | 2.4
24 | 86 | 9.3131 | 11.481 | 96 | 2.4
25 | 96 | 9.8185 | 13.692 | 9.614 | 3.7
26 | 87 | 9.3147 | 12.197 | 9.88 | 2.8
27 | 72 | 8.5132 | 11.582 | 9.16 | 2.4
28 | 64 | 8131 | 11.473 | 8.510 | 3.2
29 | 46 | 6.9101 | 1053 | 7.52 | 1
30 | 13 | 3.514 | 3.818 | 4.81 | 1
06-02-2010
Electron Efficiency
Chosen electron paddles are following for the positive and negative paddles respectively: 7 and 11.
electroneffbp.root && electroneffbn.root
B>0
TH1.Print Name = Qsqrd, Entries= 323638, Total sum= 323634 fSumw[0]=0, x=-0.2 fSumw[1]=0, x=-0.1 fSumw[2]=0, x=9.71039e-18 fSumw[3]=0, x=0.1 fSumw[4]=3, x=0.2 fSumw[5]=21, x=0.3 fSumw[6]=93, x=0.4 fSumw[7]=285, x=0.5 fSumw[8]=575, x=0.6 fSumw[9]=1148, x=0.7 fSumw[10]=2478, x=0.8 fSumw[11]=9402, x=0.9 fSumw[12]=24380, x=1 fSumw[13]=31648, x=1.1 fSumw[14]=29967, x=1.2 fSumw[15]=27864, x=1.3 fSumw[16]=27157, x=1.4 fSumw[17]=26820, x=1.5 fSumw[18]=25603, x=1.6 fSumw[19]=25027, x=1.7 fSumw[20]=24470, x=1.8 fSumw[21]=23512, x=1.9 fSumw[22]=20320, x=2 fSumw[23]=13453, x=2.1 fSumw[24]=6738, x=2.2 fSumw[25]=2043, x=2.3 fSumw[26]=449, x=2.4 fSumw[27]=119, x=2.5 fSumw[28]=41, x=2.6 fSumw[29]=13, x=2.7 fSumw[30]=5, x=2.8 fSumw[31]=4, x=2.9
B<0
TH1.Print Name = Qsqrd, Entries= 716018, Total sum= 716011
fSumw[0]=0, x=-0.2 fSumw[1]=0, x=-0.1 fSumw[2]=180, x=9.71039e-18 fSumw[3]=112762, x=0.1 fSumw[4]=160348, x=0.2 fSumw[5]=91665, x=0.3 fSumw[6]=62692, x=0.4 fSumw[7]=46135, x=0.5 fSumw[8]=35169, x=0.6 fSumw[9]=28473, x=0.7 fSumw[10]=23810, x=0.8 fSumw[11]=20763, x=0.9 fSumw[12]=18452, x=1 fSumw[13]=16021, x=1.1 fSumw[14]=14494, x=1.2 fSumw[15]=12731, x=1.3 fSumw[16]=11610, x=1.4 fSumw[17]=10422, x=1.5 fSumw[18]=9437, x=1.6 fSumw[19]=8929, x=1.7 fSumw[20]=8149, x=1.8 fSumw[21]=7504, x=1.9 fSumw[22]=6209, x=2 fSumw[23]=4557, x=2.1 fSumw[24]=2948, x=2.2 fSumw[25]=1625, x=2.3 fSumw[26]=659, x=2.4 fSumw[27]=195, x=2.5 fSumw[28]=50, x=2.6 fSumw[29]=18, x=2.7 fSumw[30]=4, x=2.8 fSumw[31]=7, x=2.9
Electron Eff Result
Inclusive detected electrons -vs- Q-squared | Inclusive Missing Mass (W) for 1.0 Q^2 <1.2 |
Media:electronefficiencyratioBp7Bn11.txt
Now plot efficiency as function of X_{BJ} and W < 1232 and require pion.
Positive Pion Efficiency dependence on
Pion and electron both required.
W<1232 and
Now cut on Q^2 where the inclusive electron rates are the same with both torus settings and then require at least one positive pion.
X_bj | B_n/B_p Rates |
---|---|
0.14 | 0.25 | 0.55
0.15 | 0.74 | 0.27
0.17 | 1.07 | 0.18
0.19 | 1.3 | 0.13
0.2 | 1.4 | 0.14
There appears to be a region around X_{Bj}= 0.2 which has the same number of pions detected for both torus settings.
Negative Pion Efficiency dependence on
Pion and electron both required(e_sector=7 for B>0 && e_sector=11 for B<11).
Now cut on Q^2 where the inclusive electron rates are the same with both torus settings and then require at least one positive pion.
B_p/B_n Rates | |
---|---|
0.2 | 0.004 | 0.55
0.3 | 0.017 | 0.5
0.4 | 0.069 | 0.6
0.5 | 0.0262 | 0.6
0.6 | 0.039 | 0.5
0.7 | 0.1 | 0.64
0.8 | 0.055 | 0.52
0.9 | 0.259 | 0.52
1 | 1.232 | 0.52
1.1 | 3.96 | 0.8
There DOES NOT appears to be a region which has the same number of negative pions detected for both torus settings.
What is wrong?
8/13/10
1.) Change Osipenko cuts to maximize electrons when B <0 but still minimize impact of negative pion contamination. Look at effects on Npe distribution.
Insert current number of electron events that are removed by the Osipenko cut for B<0. Compare it to event removed by other cuts.
2.) Schedule Prelim exam.
Shropshire has replaced cole.
Members are: Forest, Fisher, Shropshire, Dale, Tatar(?)
Ask Dustin McNulty
1.) [1]
"Original cut parameters generated by Osipenko et.al. were not very efficient for especially outbending data of eg1b experiment. The loss of electrons was substantial. For inbending data, loss of electrons were at acceptable level. To gain some electrons back we generated new cut parametes that will specifically work better for outbending data. Also we slightly adjusted the cut parameters for inbending data for some sectors and segments."
2.) Upgraded Proposal defense presentation(includes event display) File:TamarProposalP 1.pdf
11/10/10
DTS files used for analysis.
Media:ND3Bn.txt
Media:ND3Bp.txt
Media:NH3Bn.txt
Media:NH3Bp.txt
positive
negative
What are the cuts for the above histogram?
pion, OSI, EC
11/30/10
DST ntuple suggestions
- Event number and run number should be recorded. Run number is in RUNINFO. Event number should be in the event packet.
- Create variable called helicity and fill it with absolute helicity.
GEM detector
- order mylar and copper tape., 1" wide, $20 worth of each
- check DPO 4104 see if working properly
- find 10 frames for Qweak GEM foils (or order more)
- check gas supply
12/6/10
DST ntuple
Run number looks good.
PbPt values are all non-zero now.
1) Some of the TORUS values are zero when they should be positive?
Doesnt matter. There are totally four files: ND3_target+Torus_positive, ND3_target+Torus_negative, NH3_target+Torus_positive and NH3_target+Torus_negative. So not an issue.
2.) Electrons have less than 0.25 GeV energy?
Still dont know.
3.) ASYM=HWP*LINAC*P_T is in the root file.
4.) Where are the FC normalization histograms
12/20/10
DST
1.) Looks like a particle ID problem for outbending (B<0) negative pions.
Calculate the missing mass for the and stor it in M_X. (included and corrected in NTUPLE)
Redo all the ntuples.
All ntuples are done.
2.) is run 27048 OK (no target run(empty)), corrected for both target runs
3.) Current quarks(the core of the constituent quark without the gluons and sea quarks(covering). The mass of the current quarks(up and down) is 5-10 MeV), light cone?
pion momentum for different torus settings and targets
pion paddle number for different torus settings
Need a before and after cuts histogram with stats to see number of events dropped
1/24/2011
1.) Find energy range with substantial ND3, pi- events when B <0.
Ratio plot for Q^2 and X_{BJ}
once you find the Q^2 and X_BJ range holding a reasonable amount of data.
2.) Inclusive electron scattering ratio of
Inclusiveelectrons -vs- Q-squared | Inclusive Missing Mass (W) for 1.0 Q^2 <1.2 |
[[|300px|thumb|The ratio of inclusive electrons detected in scintillator paddle #7 when Btorus >0 (B_p)to inclusive electrons detected by paddle 11 when B<0(B_n) NH3 Target]] | [[|300px|thumb|The inclusive missing mass W for each torus setting. Dashed line is B>0 and solid line is B<0]] |
[[|300px|thumb|The ratio of inclusive electrons detected in scintillator paddle #7 when Btorus >0 (B_p)to inclusive electrons detected by paddle 11 when B<0(B_n)]]ND3 Target | [[|300px|thumb|The inclusive missing mass W for each torus setting. Dashed line is B>0 and solid line is B<0]] |
[[|300px|thumb|The ratio of inclusive electrons detected in scintillator paddle #7 when Btorus >0 (B_p)to inclusive electrons detected by paddle 11 when B<0(B_n)]] Both Targets | 300px|thumb|The inclusive missing mass W for each torus setting. Dashed line is B>0 and solid line is B<0 |
3.) Semi Inclusive pion production ratios -vs- Q^2, Only electron cuts
/cache/mss/clas/eg1b/production/pass1/v4/4p2out/misc/dst/dst2828*
ND3 4.2-
28287 28288 28289 28311 28312 28313 28314 28315 28316 28317 28319 28320 28321 28322 28323 28335 28336 28337 28338 28339 28340 28341 28351 28352 28367 28368 28369 28370 28371 28372 28373 28374 28375 28376 28377 28378 28379 28380 28381 28385 28386 28389 28390 28391 28392 28393 28394 28396 28397 28398 28399 28400 28401
ND3 4.2+
28074 28075 28076 28077 28078 28079
NH3 4.2-
28407 28408 28409 28410 28411 28412 28413 28414 28415 28416 28417 28422 28423 28424 28425 28426 28427 28428 28429 28432 28433 28438 28439 28443 28445 28446 28447 28448 28449 28450 28456 28457 28458 28460 28461 28462 28463 28464 28467 28469 28471 28472 28473 28476 28478 28479
NH3 4.2+
28205 28207 28208 28209 28210 28211 28212 28214 28215 28216 28217 28222 28223 28224 28225 28226 28227 28230 28231 28232 28233 28234 28235 28236 28240 28242 28244 28245 28246 28247 28249 28250 28252 28253 28254 28255 28256 28260 28261 28262 28263 28264 28265 28266 28272 28274 28275 28276 28277
File locations http://www.jlab.org/Hall-B/secure/eg1/EG2000/nevzat/UPGRADE_DST/
/cache/mss/home/nguler/dst
Rates before and after requiring pions
all the cuts are applied, except NPHE>2.5 cut.
4.2 GeV, ND3 target, 98 files, B<0
4.2 GeV, ND3 target, 32 files, B>0
The ratio for ND3 4.2 GeV data
Electron paddle selection
Inclusive
Electron Paddle Number(Inclusive, B<0, 4.2 GeV Beam, ND3 Target) | Electron Paddle Number(Inclusive, B>0, 4.2 GeV Beam, ND3 Target) |
Semi-Inclusive
Electron Paddle Number(Semi-Inclusive, B<0, 4.2 GeV Beam, ND3 Target) | Electron Paddle Number(Semi-Inclusive, B>0, 4.2 GeV Beam, ND3 Target) |
B>0, ND3 Electron paddle number=5
B<0, ND3 Electron paddle number=10
The Ratio
X_B | without pions | with pions |
0.3 | ||
0.35 | ||
0.4 | ||
0.45 | ||
0.5 | ||
0.55 |
The ratio for NH3 4.2 GeV data
Electron paddle selection
Inclusive
Electron Paddle Number(Inclusive, B<0, NH3 target, 4.2 GeV Beam) | Electron Paddle Number(Inclusive, B>0, NH3 target, 4.2 GeV Beam) |
Semi-Inclusive
Electron Paddle Number(Semi-Inclusive, B<0, NH3 target, 4.2 GeV Beam) | Electron Paddle Number(Semi-Inclusive, B>0, NH3 target, 4.2 GeV Beam) |
B>0, NH3 Electron paddle number=5
B<0, NH3 Electron paddle number=10
The Ratio
X_B | without pions | with pions |
0.3 | ||
0.35 | ||
0.4 | ||
0.45 | ||
0.5 | ||
0.55 |
1/31/11
Electron paddle number for B>0 is 5 and for B<0 - 10. The cut was applied on
:Inclusive
Are the ratio's from rates normalized with beam current measured by the FC?
Is the conclusion that the NH3 and ND3 rates are indistinguishable?
1.) Overlap electron kinematic (
, W, Momentum) for B>0 and B<0 and ND3 and NH3.(NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0)
Electron Momentum((NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0)) | Electron | Angle((NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0))W mass((NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0)) |
2.) Now plot ratio (B< 0/B>0) electron kinematic (
, W, Momentum) for ND3 and NH3. ( I expect 2 curves in one plot),
Electron Momentum( | , )Electron | Angle( , )W mass( | , )
2.) Target ratio (B< 0/B>0) Difference electron kinematic (
, W, Momentum) (Ration for ND3 target - Ratio for NH3 target). ( I expect 1 curves in one plot)
Electron Momentum ( | )Theta Angle( ) | W mass( | )
Semi-Inclusive
(NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0)
Electron Momentum((NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0)) | Electron | Angle((NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0))W mass((NH3,B>0), (NH3,B<0), (ND3,B>0) && (ND3,B<0)) |
2