Difference between revisions of "CAEN V488 TDC"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
You can change the dynamic range of the TDC by setting bits using the library function c775setFSR. | You can change the dynamic range of the TDC by setting bits using the library function c775setFSR. | ||
| − | [[Image:CAEN_V488_TDCAddressA.jpg | 400 px]][[Image: | + | [[Image:CAEN_V488_TDCAddressB.jpg | 400 px]][[Image:CAEN_V488_TDCAddressA.jpg | 400 px]] |
| + | [[Image:CAEN_V488_TDCAddressMap.jpg | 400 px]] | ||
{| border="1" |cellpadding="20" cellspacing="0 | {| border="1" |cellpadding="20" cellspacing="0 | ||
Latest revision as of 23:43, 24 November 2014
The 12 bit ADC conversion time is 5.7 s. A sliding scale technique is used to reduce differential nonlinearity by injecting an offset. This reduces the dynamic range to 0 3840. ADC values between 3841 and 4095 indicate an error.
The TDC measures the time interval between the falling ECL inputs to the start/stop and the channel.
You can change the dynamic range of the TDC by setting bits using the library function c775setFSR.
| Address | |
| Pin | Setting |
| SW 1 | 2 |
| SW 2 | 2 |
| SW 3 | 0 |
| SW 4 | 0 |
ROC library
Compiling library
initialize TDC
-> c775Init(0x610000) Initialized TDC ID 0 at address 0x90610000