Difference between revisions of "CaGaS Phase II"
Jump to navigation
Jump to search
Line 10: | Line 10: | ||
**Design and print holders for foils and powder | **Design and print holders for foils and powder | ||
**Measure up as close to Gd as possible and then ~12" away to calculate the adjustment factors necessary for coincidences | **Measure up as close to Gd as possible and then ~12" away to calculate the adjustment factors necessary for coincidences | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[[CH_785NADC]] | [[CH_785NADC]] |
Revision as of 16:23, 21 November 2022
CaGaS Phase II (Capture Gamma Spectroscopy) is a repeat of capture gamma energy spectroscopy experiments performed during the summer of 2021 in the ISU clean room. The purpose of revisiting the capture gamma experiment is to use a new, higher activity 252Cf source (U2-622) and to investigate different thicknesses of Gadolinium foils and the effect on the high energy photon flux produced. This work is being performed in support of the main conversion process for the In-Situ Positron Annihilation Spectroscopy experiment being designed and performed by INL staff and external collaborators.
Impromptu To Do List
- Investigate the difference with/out PUR (pile up rejection) enabled on spec amp
- Look for differences with high count rate source
- Build shielded tunnel for Gd optimal thickness measurements
- Both Gd powder and foils
- Design and print holders for foils and powder
- Measure up as close to Gd as possible and then ~12" away to calculate the adjustment factors necessary for coincidences
I) CaGaS Phase II Associated Equipment and Experimental Setup
Polyethylene
Radioactive Sources
Electronics Chain
Gadolinium
II) Neutron Attenuation Measurements
Discriminator Dual Pulsing Investigation
Initial Measurements
CH He3 Attenuation Measurements
Revisited Measurements
CH He3 Attenuation Measurements: 3 Different Cf252 Sources