Gain matching: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
==7/17/16== | ==7/17/16== | ||
Information about the run setup can be seen [[Signal cable timing|here]] (thresholds, source positioning, ect). | Information about the run setup can be seen [[Signal cable timing|here]] (thresholds, source positioning, ect). | ||
Each PMT was individually placed in coincidence with a trigger at the center of the room. High voltage was then adjusted on each PMT until all rates were equal. | Each PMT was individually placed in coincidence with a trigger at the center of the room. High voltage was then adjusted on each PMT until all rates were equal. | ||
Revision as of 07:07, 18 August 2016
7/17/16
Information about the run setup can be seen here (thresholds, source positioning, ect).
Each PMT was individually placed in coincidence with a trigger at the center of the room. High voltage was then adjusted on each PMT until all rates were equal.
| Detector | PMT | High voltage | |
|---|---|---|---|
| angle | color | ||
| 30 | Red | Top | 1555 |
| Bot | 4444 | ||