Difference between revisions of "2nCor Equipment"
(→TDC) |
(→TDC) |
||
| Line 35: | Line 35: | ||
| Detector || TDC channel || NIM-ECL channel|| Patch Pannel # | | Detector || TDC channel || NIM-ECL channel|| Patch Pannel # | ||
|- | |- | ||
| − | | | + | | BLUT || TDC16 || in A ch 0 || A6 |
|- | |- | ||
| − | | | + | | || || || |
|- | |- | ||
| || || || | | || || || | ||
Revision as of 16:47, 16 March 2015
Detectors
PMTs
http://www.hamamatsu.com/resources/pdf/etd/R580_TPMH1100E.pdf
Scintillators
e+e- spectrometer
DAQ electronics
Signal Processing
Discriminator
CAEN N841
The pulse forming stage of the discriminator produces an output pulse whose width is adjustable in a range from 5 ns to 40 ns. Each channel can work both in Updating and Non-Updating mode according to on-board jumpers position. The discriminator thresholds are individually settable in a range from -1 mV to -255 mV (1 mV step), via an 8-bit DAC. The minimum detectable signal is -5 mV. The back panel houses VETO and TEST inputs, the OR output and the Current Sum output, which generates a current proportional to the input multiplicity, i. e. to the number of channels over threshold, at a rate of -1.0 mA per hit (-50 mV per hit into a 50 Ohm load) ±20%.
NIM-ECL converter
Phillips Model 726
TDC
- TDC channel Map
| Detector | TDC channel | NIM-ECL channel | Patch Pannel # |
| BLUT | TDC16 | in A ch 0 | A6 |