Software Access Information

This page provides access information for software at the IAC:

---

The access code to install the IAC Software: iacsetup

Required network connection settings for Windows 7 & Windows 7 Activation

---

Required Network Settings when installing/configuring Windows 7 Be sure to configure these settings before attempting to activate Windows 7, otherwise it will fail Created by: Ashley Knowles-Swingle Creation Date: Wednesday, March 31, 2010 Start • Control Panel o Network and Sharing Center  In the left pane of the window, Choose “Change Adapter Settings” • Right Click on the Network Connection (Wireless of LAN), choose Properties • When the Properties come up, select “Internet Protocol Version 4 (TCP/IPv6) o Click properties  Click on the “General” Tab • At the bottom of the screen, select the “Use the Following DNS Server Addresses” Radio Button o In “Preferred DNS Server”, enter: 134.50.254.5 o In the “Alternate DNS Server”, enter 134.50.57.57 • After entering the DNS addresses, click on the Advanced Tab at the bottom of the window o Now you’re in the “Advanced TCP/IP Settings” Window  Click on the DNS Tab • In the box labeled “DNS Server Addresses, in order of use” enter the following two IP Addresses: o 134.50.254.5 o 134.50.57.57 • Half way down the window, select the radio button labeled “Append these DNS suffixes (in order)”: o Inside this box enter the following DNS:  Isu.edu • Below that be sure to select(check) the “Register this connection’s addresses in DNS” check box • Be sure to unselect(uncheck) the “Use this connection’s DNS suffic in DNS registration” checkbox • At the top of the window, click on the “WINS” tab o Inside the box labeled “WINS addresses, in order of use” add the following two addresses:  134.50.250.43  134.50.205.125 o Click OK • Now try to activate!