Difference between revisions of "HRRL radiation tests"
| Line 3: | Line 3: | ||
The HRRL was set at 15 MeV beam energy, 20 mA peak current, 1 kHz repetition rate, and 30 ns pulse width. Five OSL dosimeters were placed at each of 15 locations in the cell. Locations are marked on the following map: | The HRRL was set at 15 MeV beam energy, 20 mA peak current, 1 kHz repetition rate, and 30 ns pulse width. Five OSL dosimeters were placed at each of 15 locations in the cell. Locations are marked on the following map: | ||
| − | [[Image:dosimeter-locations-20090204.png]] | + | [[Image:dosimeter-locations-20090204.png | 200px ]] |
[[Media:dosimeter-locations-20090204.pdf]] | [[Media:dosimeter-locations-20090204.pdf]] | ||
| Line 9: | Line 9: | ||
Readings in mrad are reported in the following table. They were taken before exposure (first column) and after a couple of minutes of machine tuning (second column). Readings in the third column were taken 94 minutes after the second reading. During these 94 minutes, the machine was running with the settings mentioned above. | Readings in mrad are reported in the following table. They were taken before exposure (first column) and after a couple of minutes of machine tuning (second column). Readings in the third column were taken 94 minutes after the second reading. During these 94 minutes, the machine was running with the settings mentioned above. | ||
| − | [[Image:exposure-measurements-20090204.png]] | + | [[Image:exposure-measurements-20090204.png | 200px ]] |
[[Media:exposure-measurements-20090204.pdf]] | [[Media:exposure-measurements-20090204.pdf]] | ||
Revision as of 19:46, 6 July 2009
Building a new positron beamline in the HRRL cell might require moving the linac itself. To help assess whether this is feasible with current shielding, radiation levels were measured on Feb 4, 2009 by M. Balzer and G. Stancari.
The HRRL was set at 15 MeV beam energy, 20 mA peak current, 1 kHz repetition rate, and 30 ns pulse width. Five OSL dosimeters were placed at each of 15 locations in the cell. Locations are marked on the following map:
Media:dosimeter-locations-20090204.pdf
Readings in mrad are reported in the following table. They were taken before exposure (first column) and after a couple of minutes of machine tuning (second column). Readings in the third column were taken 94 minutes after the second reading. During these 94 minutes, the machine was running with the settings mentioned above.
Media:exposure-measurements-20090204.pdf
Back to Positrons