Revision as of 05:19, 20 March 2009

LCS model paper

Syed_LCS_G4ModelPaper

Formulas

Compton [math]E_{gamma}[/math] kinematic

Equation 1 from Reference File:Stepanek NIMA 412 1998pg174.pdf says that the backsattered x-ray energy is given by

[math] (E^{max}_\gamma) [/math]@532nm =

[math] (E^{max}_\gamma) [/math]@1064nm =

GEANT4 calculation in syed_compton:

Lorentz boost

Notes on Syed's GEANT4 project for Laser Compton Scattering at the IAC

2/7/08

Step 1: Configure Event generator in which electron parameters can be changes. Move the source left and right of the center. Change is momentum direction; going left and going right.

Step 2: comment out electron and add gamma. get it to move in the same way.

Step 3: turn them both on

Step 4: if fail then find references on event Generator with 2 intersecting beams, perhaps ILC, LHC or BaBar has one.

2/14/08

Problem last week was due to editing the wrong file.

We now have a event generator which starts an electron and a photon moving toward eachother.

We see and event when the photon energy is 500 keV and only the compton process is turned on.

Next step:

1.) edit the Stepping Verbose so only a Compton event is printed out

2.) add an event counter so we know how many beam triggers are done to get the event( edit SteppingVerbose.h, add a global variable to the class definition)

output : event number, Photon position, Electron position, Photon and Electron initial and final momentum.

3.) Compare output with BDSIM at 500 keV

4.) Insert new physics process for Low Energy Compton

2/28/08

1.) edit the Stepping Verbose so only a Compton event is printed out (done)

2.) add an event counter so we know how many beam triggers are done to get the event( edit SteppingVerbose.h, add a global variable to the class definition)

output : event number, Photon position, Electron position, Photon and Electron initial and final momentum.

3.) Compare output with BDSIM at 500 keV

4.) Insert new physics process for Low Energy Compton (done)

Still need to do 2 &3.

Compare hand calculation of an event or two with GEANT4 output

3/6/08

Goals for last week

1.) Compare hand calculation of an event or two with GEANT4 output

2.) add an event counter so we know how many beam triggers are done to get the event( edit SteppingVerbose.h, add a global variable to the class definition)

output : event number, Photon position, Electron position, Photon and Electron initial and final momentum.

3.) Compare output with BDSIM at 500 keV (BDSIM crashes at this high energy)

Tasks for next week:

1.) How many GEANT4 triggers does it take to get an event when E-gamma = 30 eV

Zero/10^7. However, if I set the E-gamma=300 eV then I see 1819 triggers out of 10 million iterations.

2.) remove detector which blocks reactions for 0<Z<200

   [box]Commented out Sensitive Detector function in DetectorConstruction.cc. I still see the SD in display[/box]

3.) Store tracking info for photon and electron into variables for printing out

   [box]Show the text file for 300 eV laser and 20 MeV electron[/box]

4.) Compare BDSIM and GEANT4 for E-gamma = 300 or 30 eV

   [box]BDSIM crashes at 300 eV[/box]

5.) Any measured X-sections for 2 eV Compton?

   [box]Was not able to find on internet. BDSIM however, uses GEANT4 database...We might need to dig into their code, I got the source code[/box]

3/13/08

Tasks:

1.) fix output file so electons and photon from same event on same line

  o Geant4 output.txt:

Variable	value
# Triggers	153610
Compton Event #	1
Scattered Photon energy (keV)	0.299784
photon X position	0
photon Y position	0
photon Z position	-441.431
photon X Momentum	6.30938e-05
photon Y Momentum	0.000285127
photon Z Momentum	-6.77687e-05
Particle ID	22
Scattered e- KE (keV)	0.000215785
Scattered electron X position	-177.027
Scattered electron Y position	-800
Scattered electron Z position	590.444
Scattered electron X Momentum	-6.30938e-05
Scattered electron Y Momentum	-0.000285127
Scattered electron Z Momentum	0.000367769
Particle ID	11

= electron compton wavelength =

= electron final kinetic energy

= ejected electron angle w.r.t original photon direction

     15361 ||   1   || 0.299784   0   0   -441.431   6.30938e-05   0.000285127   -6.77687e-05   22   0.000215785   -177.027   -800   590.444   -6.30938e-05 -0.000285127   0.000367769   11   
    32685.8   2   0.299791   0   0   -131.765   -7.34024e-05   0.000285186   -5.61732e-05   22   0.000208981   192.024   -746.061   800   7.34024e-05   -0.000285186   0.000356173   11   
    33535.9   3   0.299682   0   0   -754.315   -0.000175966   -1.63899e-05   -0.000242026   22   0.000318029   504.599   46.9997   800   0.000175966   1.63899e-05   0.000542026   11   
      34157   4   0.299864   0   0   -579.415   -7.39129e-05   -0.000282637   6.7614e-05   22   0.00013635   209.21   800   78.3512   7.39129e-05   0.000282637   0.000232386   11

. . . .

2.)Compare compton scattering between BDSIM and GEANT4 for 300 eV photon incident on a 20 MeV electron

BDSIM	GEANT4

o BDSIM (5,000,000 Iterations):

o Geant4 (5,000,000 iterations):

3.) remove physics processes and run 10^9 events piece mealed so you save event generator seed every 10^8

o Still waiting for run_0.rndm, run_1.rndm...., files on inca. Process at the moment is executing!

3/20/08

Taks for next week

1.) Check elastic kinematics of LowEnergyCompton for case where electron is 1 eV and incident photon ranges between 300 ev and 8 keV

output.txt for 1 eV electron and 8 keV gamma. Number of iterations: 1,000,000

Variable	LowEnCompton_value	Compton_value
# Triggers	53	48
Compton Event #	2	2
Scattered Photon energy (keV)	7.79307	7.76672
photon X position	0	0
photon Y position	0	0
photon Z position	-752.482	-751.601
photon X Momentum	-0.0050576	0.00228733
photon Y Momentum	0.00239243	-0.00204773
photon Z Momentum	-0.00542483	-0.0071342
Particle ID	22	22
Scattered e- KE (keV)	0.206934	0.233283
Scattered electron X position	584.874	-234.503
Scattered electron Y position	-276.667	209.94
Scattered electron Z position	800	800
Scattered electron X Momentum	0.0050576	-0.00228733
Scattered electron Y Momentum	-0.00239243	0.00204773
Scattered electron Z Momentum	0.0134248	0.0151342
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 8 keV incoming Photons	GEANT4_Compton, 8 keV incoming Photons

GEANT4_LowEnCompton, 1 eV incoming Electrons	GEANT4_Compton, 1 eV incoming Electrons

  output.txt for 1 eV electron and 300 eV gamma. Number of iterations: 2,000,000

Variable	LowEnCompton_value	Compton_value
# Triggers	32685	7123
Compton Event #	2	2
Scattered Photon energy (keV)	0.299791	0.299745
photon X position	0	0
photon Y position	0	0
photon Z position	-131.765	554.105
photon X Momentum	-7.34024e-05	0.000261431
photon Y Momentum	0.000285186	5.7275e-05
photon Z Momentum	-5.61732e-05	-0.000134982
Particle ID	22	22
Scattered e- KE (keV)	0.000208981	0.000255222
Scattered electron X position	192.024	-147.787
Scattered electron Y position	-746.061	-32.3775
Scattered electron Z position	800	800
Scattered electron X Momentum	7.34024e-05	-0.000261431
Scattered electron Y Momentum	-0.000285186	-5.7275e-05
Scattered electron Z Momentum	0.000356173	0.000434982
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 300 eV incoming Photons	GEANT4_Compton, 300 eV incoming Photons

GEANT4_LowEnCompton, 1 eV incoming Electrons	GEANT4_Compton, 1 eV incoming Electrons

see if #triggers is same as above when [math]E_{\gamma}[/math] = 800 eV and [math]E_{e}[/math] = 1 eV

2.) Same as above except now change the incident electron energy up to 20 MeV, 50 ev, 1 keV, 10 keV, 1Mev, 10 MeV

output.txt for 20 MeV electron and 300 eV gamma. Number of Iterations: 2,000,000

Variable	LowEnCompton_value	Compton_value
# Triggers	32685	7123
Compton Event #	2	2
Scattered Photon energy (keV)	0.299791	0.299745
photon X position	0	0
photon Y position	0	0
photon Z position	-131.765	554.105
photon X Momentum	-7.34024e-05	0.000261431
photon Y Momentum	0.000285186	5.7275e-05
photon Z Momentum	-5.61732e-05	-0.000134982
Particle ID	22	22
Scattered e- KE (keV)	0.000208981	0.000255222
Scattered electron X position	192.024	-147.787
Scattered electron Y position	-746.061	-32.3775
Scattered electron Z position	800	800
Scattered electron X Momentum	7.34024e-05	-0.000261431
Scattered electron Y Momentum	-0.000285186	-5.7275e-05
Scattered electron Z Momentum	0.000356173	0.000434982
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 300 eV incoming Photons	GEANT4_Compton, 300 eV incoming Photons

GEANT4_LowEnCompton, 20 MeV incoming Electrons	GEANT4_Compton, 20 MeV incoming Electrons

4/10/08

1.) check if cross section is same fore 100 eV < [math]E_{gamma}[/math] <800 eV

Case-a) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=100 eV, process="LowEnCompton", #events: 2,000,000
              Result=0 interactions

Case-b) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=100 eV, process="Compton", #events: 2,000,000
              Result=0 interaction

Case-c) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=105 eV, process="LowEnCompton", #events: 2,000,000
              Result=0 interaction

Case-d) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=105 eV, process="Compton", #events: 2,000,000
              Result= 12 interactions

Variable	LowEnCompton_value (case-c)	Compton_value (case-d)
# Triggers		490155
Compton Event #		2
Scattered Photon energy (keV)		0.104974
photon X position		0
photon Y position		0
photon Z position		-521.846
photon X Momentum		2.94637e-05
photon Y Momentum		-9.85919e-05
photon Z Momentum		-2.07632e-05
Particle ID	22	22
Scattered e- KE (keV)		2.58365e-05
Scattered electron X position		-239.076
Scattered electron Y position		800
Scattered electron Z position		498.63
Scattered electron X Momentum		-2.94637e-05
Scattered electron Y Momentum		9.85919e-05
Scattered electron Z Momentum		0.000125763
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 105 eV incoming Photons	GEANT4_Compton, 105 eV incoming Photons
400 px

GEANT4_LowEnCompton, 20 MeV incoming Electrons	GEANT4_Compton, 20 MeV incoming Electrons
400 px

Case-e) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=150 eV, process="LowEnCompton", #events: 2,000,000
              Result=0 interaction

Case-f) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=150 eV, process="Compton", #events: 2,000,000
              Result= 93 interactions

Variable	LowEnCompton_value (case-e)	Compton_value (case-f)
# Triggers		36600
Compton Event #		2
Scattered Photon energy (keV)		0.149994
photon X position		0
photon Y position		0
photon Z position		331.001
photon X Momentum		-6.9277e-05
photon Y Momentum		-2.37144e-05
photon Z Momentum		0.000130907
Particle ID	22	22
Scattered e- KE (keV)		5.60297e-06
Scattered electron X position		800
Scattered electron Y position		273.85
Scattered electron Z position		551.485
Scattered electron X Momentum		6.9277e-05
Scattered electron Y Momentum		2.37144e-05
Scattered electron Z Momentum		1.9093e-05
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 150 eV incoming Photons	GEANT4_Compton, 150 eV incoming Photons
400 px

GEANT4_LowEnCompton, 20 MeV incoming Electrons	GEANT4_Compton, 20 MeV incoming Electrons
400 px

Case-g) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=200 eV, process="LowEnCompton", #events: 2,000,000
              Result=0 interaction

Case-h) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=200 eV, process="Compton", #events: 2,000,000
              Result=  179 interactions

Variable	LowEnCompton_value (case-g)	Compton_value (case-h)
# Triggers		33713
Compton Event #		2
Scattered Photon energy (keV)		0.19991
photon X position		0
photon Y position		0
photon Z position		778.343
photon X Momentum		7.46479e-05
photon Y Momentum		0.000183052
photon Z Momentum		-2.97293e-05
Particle ID	22	22
Scattered e- KE (keV)		8.98786e-05
Scattered electron X position		-7.03722
Scattered electron Y position		-17.2567
Scattered electron Z position		800
Scattered electron X Momentum		-7.46479e-05
Scattered electron Y Momentum		-0.000183052
Scattered electron Z Momentum		0.000229729
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 200 eV incoming Photons	GEANT4_Compton, 200 eV incoming Photons
400 px

GEANT4_LowEnCompton, 20 MeV incoming Electrons	GEANT4_Compton, 20 MeV incoming Electrons
400 px

Case-i) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=400 eV, process="LowEnCompton", #events: 2,000,000
              Result= 697 interaction

Case-j) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=400 eV, process="Compton", #events: 2,000,000
              Result= 898 interactions

Variable	LowEnCompton_value (case-i)	Compton_value (case-j)
# Triggers	6012	5318
Compton Event #	2	2
Scattered Photon energy (keV)	0.399439	0.399849
photon X position	0	0
photon Y position	0	0
photon Z position	233.061	760.793
photon X Momentum	-0.000130127	1.38275e-06
photon Y Momentum	0.000205697	0.000341899
photon Z Momentum	-0.000316714	0.000207322
Particle ID	22	22
Scattered e- KE (keV)	0.000560591	0.000150707
Scattered electron X position	102.933	-0.281371
Scattered electron Y position	-162.712	-69.5718
Scattered electron Z position	800	800
Scattered electron X Momentum	0.000130127	-1.38275e-06
Scattered electron Y Momentum	-0.000205697	-0.000341899
Scattered electron Z Momentum	0.000716714	0.000192678
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 400 eV incoming Photons	GEANT4_Compton, 400 eV incoming Photons

GEANT4_LowEnCompton, 20 MeV incoming Electrons	GEANT4_Compton, 20 MeV incoming Electrons

Case-k) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=800 eV, process="LowEnCompton", #events: 2,000,000
              Result= 2534 interactions

Case-l) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=800 eV, process="Compton", #events: 2,000,000
              Result= 3314 interactions

Variable	LowEnCompton_value (case-k)	Compton_value (case-l)
# Triggers	2033	1703
Compton Event #	2	2
Scattered Photon energy (keV)	0.798489	0.799399
photon X position	0	0
photon Y position	0	0
photon Z position	302.879	759.113
photon X Momentum	0.000776101	-0.000120116
photon Y Momentum	-8.6914e-05	-0.000672133
photon Z Momentum	-0.00016643	0.000415751
Particle ID	22	22
Scattered e- KE (keV)	0.00151064	0.000600626
Scattered electron X position	-399.218	12.7812
Scattered electron Y position	44.7076	71.5199
Scattered electron Z position	800	800
Scattered electron X Momentum	-0.000776101	0.000120116
Scattered electron Y Momentum	8.6914e-05	0.000672133
Scattered electron Z Momentum	0.00096643	0.000384249
Particle ID	11	11

o Plots

GEANT4_LowEnCompton, 800 eV incoming Photons	GEANT4_Compton, 800 eV incoming Photons

GEANT4_LowEnCompton, 20 MeV incoming Electrons	GEANT4_Compton, 20 MeV incoming Electrons

2.) Create your own Physics list subroutine called SyedCompton which is a renamed copy of LowEnergyCompton

Created local SyedLowEnergyCompton and SyedCompton subroutines:

Case-m) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=800 eV, process="LowEnCompton", #events: 2,000,000
              Result= 2534 interactions

Case-n) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=800 eV, process="Compton", #events: 2,000,000
              Result= 3314 interactions

Variable	SyedLowEnCompton_value (case-m)	SyedCompton_value (case-n)
# Triggers	2033	1703
Compton Event #	2	2
Scattered Photon energy (keV)	0.798489	0.799399
photon X position	0	0
photon Y position	0	0
photon Z position	302.879	759.113
photon X Momentum	0.000776101	-0.000120116
photon Y Momentum	-8.6914e-05	-0.000672133
photon Z Momentum	-0.00016643	0.000415751
Particle ID	22	22
Scattered e- KE (keV)	0.00151064	0.000600626
Scattered electron X position	-399.218	12.7812
Scattered electron Y position	44.7076	71.5199
Scattered electron Z position	800	800
Scattered electron X Momentum	-0.000776101	0.000120116
Scattered electron Y Momentum	8.6914e-05	0.000672133
Scattered electron Z Momentum	0.00096643	0.000384249
Particle ID	11	11

o Plots

GEANT4_SyedLowEnCompton, 800 eV incoming Photons	GEANT4_SyedCompton, 800 eV incoming Photons

GEANT4_SyedLowEnCompton, 20 MeV incoming Electrons	GEANT4_SyedCompton, 20 MeV incoming Electrons

4/17/08

1.) Lower cutoff energy and redo rate plots from previous week. Created local SyedLowEnergyCompton and SyedCompton subroutines:

Case-a) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=2.326 eV, process="LowEnCompton", #events: 2,000,000
              lowEnergyLimit(2*eV)
              intrinsicLowEnergyLimit(1*eV)
              Result=  270 interactions

Case-b) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=2.326 eV, process="Compton", #events: 2,000,000
              lowEnergyLimit(2*eV)
              Result= 0 interactions

Variable	SyedLowEnCompton_value (case-a)	SyedCompton_value (case-b)
# Triggers	18955
Compton Event #	2	2
Scattered Photon energy (keV)	0.002326
photon X position	0	0
photon Y position	0	0
photon Z position	601.57
photon X Momentum	-6.4311e-10
photon Y Momentum	-9.36186e-10
photon Z Momentum	2.326e-06
Particle ID	22	22
Scattered e- KE (keV)	1.26208e-15
Scattered electron X position	549.557
Scattered electron Y position	800
Scattered electron Z position	601.807
Scattered electron X Momentum	6.43062e-10
Scattered electron Y Momentum	9.36116e-10
Scattered electron Z Momentum	2.77288e-13
Particle ID	11	11

o Plots

GEANT4_SyedLowEnCompton, 2.326 eV incoming Photons	GEANT4_SyedCompton, 2.326 eV incoming Photons
	400 px

GEANT4_SyedLowEnCompton, 20 MeV incoming Electrons	GEANT4_SyedCompton, 20 MeV incoming Electrons
	400 px

Case-c) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=2.326 eV, process="LowEnCompton", #events: 2,000,000
              lowEnergyLimit(2*eV)
              intrinsicLowEnergyLimit(0.1*eV)
              Result=  270 interactions

Case-d) [math]E_{electron}[/math]=20 MeV, [math]E_{\gamma}[/math]=2.326 eV, process="LowEnCompton", #events: 5,000,000
              lowEnergyLimit(2*eV)
              intrinsicLowEnergyLimit(0.1*eV)
              Result=  636 interactions

Variable	SyedLowEnCompton_value (case-c)	SyedLowEnCompton_value (case-d)
# Triggers	18955	18955
Compton Event #	2	2
Scattered Photon energy (keV)	0.002326	0.002326
photon X position	0	0
photon Y position	0	0
photon Z position	601.57	601.57
photon X Momentum	-6.4311e-10	-6.4311e-10
photon Y Momentum	-9.36186e-10	-9.36186e-10
photon Z Momentum	2.326e-06	2.326e-06
Particle ID	22	22
Scattered e- KE (keV)	1.26208e-15	1.26208e-15
Scattered electron X position	549.557	549.557
Scattered electron Y position	800	800
Scattered electron Z position	601.807	601.807
Scattered electron X Momentum	6.43062e-10	6.43062e-10
Scattered electron Y Momentum	9.36116e-10	9.36116e-10
Scattered electron Z Momentum	2.77288e-13	2.77288e-13
Particle ID	11	11

o Plots

GEANT4_SyedLowEnCompton, 2.326 eV incoming Photons(2-million events)	GEANT4_SyedCompton, 2.326 eV incoming Photons (5-million events)

GEANT4_SyedLowEnCompton, 20 MeV incoming Electrons(2-million events)	GEANT4_SyedCompton, 20 MeV incoming Electrons(5-million events)

2.) After SyedCompton runs, change it so the final electron kinetic energy is calculated correctly.

    Final Electron KE is approx. equals to 20MeV in this case because energy lost by incoming electrons is so small following
    Compton interaction as shown in above plots ...suggestions???

4/24/08

1.) Try HeP Lorentz vector class and set vectors within the SyedCompton routine

CLHEP Man

HepLorentzVector P4eLab

P4eLab.setPx(HepDouble);

5/1/08

Got the class

G4LorentzVector* P4eLab;

defined in SyedLowEnergyCompton.hh

Then created the variable

 P4eLab = new G4LorentzVector;

 P4eLab->setPx(1.4596);

 G4cout << "P4e Px= " << P4eLab << G4endl;

in SyedLowEnergyCompton.cc

1.) Check the functionality of the function calls below to see if we understand how they work

P4eLab->setPx(1.4596);
cout << "P4e " << P4eLab << endl;

cout << "rest 4 Vector" << P4eLab.rest4Vector() << endl;---->"These functions are not declared!"
cout << "rest 4 Vector" << P4eLab.rest4Vector().beta << endl;---->"These functions are not declared!"

2.) Look up relativistic Lorentz transformation to boost to electron rest frame. A fair start is at

http://www.iac.isu.edu/mediawiki/index.php/Forest_Relativity_Notes#Lorentz_Transformations

3.) check out reference

A.A. Sokolov and I.M. Ternov Sov. Phys. Dokl. 8 (1964), p. 1203.

may lead to a reference for our problem.

4.) Install GEANT4 on Brems

   *done* but with graphics option was disabled, there are issues with OpenGL on brems and I was not able to compile MesaGL in my local folder

5.) create 2 sets of 24 random number seed files. The first set of 24 random number seed files will run for 2 hours and the second set will run for 24 hours.

   *Compilation Error message on Brems:*
    Compiling LCS.cc ...
    Using global libraries ...
    Linking LCS ...
    /home/naeesyed/apps/geant4/geant4.9.1.p02/lib/Linux-g++/libG3toG4.so: undefined reference to `G3Division::UpdateVTE()'
    /home/naeesyed/apps/geant4/geant4.9.1.p02/lib/Linux-g++/libG3toG4.so: undefined reference to `G3Division::CreatePVReplica()'
    /home/naeesyed/apps/geant4/geant4.9.1.p02/lib/Linux-g++/libG3toG4.so: undefined reference to `G3Division::G3Division(G3DivType, G3VolTableEntry*,     G3VolTableEntry*, int, int, int, double, double)'
    /home/naeesyed/apps/geant4/geant4.9.1.p02/lib/Linux-g++/libG3toG4.so: undefined reference to `G3Division::G3Division(G3VolTableEntry*, G3VolTableEntry*, G3Division const&)'
    collect2: ld returned 1 exit status
    make: *** [/home/naeesyed/geant4/bin/Linux-g++/LCS] Error 1

6/12/08

1.) using interactive version of LCS test the transformations below

We have proton and electron. In the Lab frame electron is moving along the x-axis with momentum ;[math]\vec{p_e}[/math] and proton is at rest. The 4-vectors are:

Lab Frame: [math]P_e=[/math]([math]E_e[/math],[math]p_e[/math],0,0) and for proton :[math]P_p=[/math]([math]m_p[/math],0,0,0)
CM Frame: :[math]{P_e}^{\prime}=[/math]([math]{E_e}^{\prime}[/math],[math]{p_e}^{\prime}[/math],[math]0[/math],[math]0[/math]) and for proton :[math]{P_p}^{\prime}=[/math]([math]{E_p}^{\prime}[/math],[math]{p_p}^{\prime}[/math],[math]0[/math],[math]0[/math])

Find such that

Using the last two equations we will get the following for x component:

Example: [math]p_e = 5.736 Gev \sim E_e[/math] : electron mass is neglibible; [math]m_p = 0.938 GeV[/math] : Mass of a proton

Electron

In our case 4-vectors for particles are

[math](P_p)_\mu = (m_p, 0, 0, 0)[/math]

Compiling on brems

1.) turned off a GUI and G3toG4 stuff

2.) edited $G4INSTALL/config/binmake.gmk and commmented out the VIS variables and include commands

3.) comment out interactive commands in LCS.cc so only batch mode would run

we are compiled now.

Practice submitting batch jobs via ssh command and the random number seed files.

Submitting batch jobs on brems

Concept: While logged into brems you can submit a job to run on bres 3 by using the ssh command via

ssh brems3 source run0.script

the script "run0.script"

contains all the command you would type interactively in order to execute the program

source ~/apps/geant4/geant4.9.1.p02/env.sh
cd /home/naeesyed/geant4/LCS/Laser_Compton_Backscattering/run0
LCS vis.mac > /dev/null

Khalid has cross sections in his interview talk

9/5/08

Insert Transformation matrix to take electron beam in Lab frame to the electron in the electron's rest frame.

Find [math]\beta_R[/math]

Lab Frame: [math]P_e{\mu}=[/math]([math]E_e[/math],[math]p_e[/math],0,0) and for proton :[math]P_{\gamma}^{\mu}=[/math]([math]E_{\gamma}[/math],[math]P_{\gamma}[/math],0,0)

Transform from the LAB frame to a reference frame in which the electron is at rest: Find [math] \beta_{CM} [/math] such that

The relativistic transformation matrix for the four momentum is given by

Insert Transformation matrix to transform outgoing X-ray momentum four vector in the Lab from to the electron at rest frame.

 Was the energy of 2.25 MeV just chosen as an example?
 This is the calculated electron energy in C.M. frame.

Write equation for [math]\theta_R[/math]= angle of the outgoing X-ray in the electron rest frame.

Klein-Nishina Compton Cross Section

Khalid LCS paper:File:Chouffani PhysRevST 050701 2006 pg9.pdf

Questions: Why [math]\theta[/math] and [math]\theta_d[/math] ?

[math]\theta_d[/math] is the detector's angle with respect to incoming LCS X-rays.

9/26/08

1.) Use B= 0.975 to transform photon to electrons rest frame inside the event generator

for a few events check

[math]E_\gamma[/math] before and after

// muon momenta in the primary's rest frame
 CLHEP::HepLorentzVector pMu1 ( p0x, p0y, p0z, p00 );
 CLHEP::HepLorentzVector pMu2 ( -p0x, -p0y, -p0z, p00 );

 // muon momenta in the boosted frame
 CLHEP::HepLorentzVector boostedPMu1 = pMu1.boostZ ( beta );
 CLHEP::HepLorentzVector boostedPMu2 = pMu2.boostZ ( beta );

 Declared the following in the event generator:
 
 //declaring G4LorentzVector for both electrons and gammas
 G4double beta = 0.975;
 p4eLab = new G4LorentzVector;
 p4gammaLab = new G4LorentzVector;

 p4gammaBoostedx = new G4LorentzVector;  
 p4gammaBoostedy = new G4LorentzVector;
 p4gammaBoostedz = new G4LorentzVector;

 p4eBoostedx = new G4LorentzVector;
 p4eBoostedy = new G4LorentzVector;
 p4eBoostedz = new G4LorentzVector;

 However, I'm stuck with in getting momentum values in the lab frame for both electrons and gammas...G4ParticleDefinition doesn't
 include "getMomentum"   function and we need momentums in the lab frame that could be passed in the above declared variables?--
 Daq 09:28, 3 October 2008 (MDT)

 Update: "ExN02EventAction" class is getting momentum values of the existing event, I declared above variables in EventAction class.
 // get information on primary particle

     G4PrimaryParticle* primary=evt->GetPrimaryVertex(0)->GetPrimary(0);

     //Added by Syed
     p4eLab(primary->GetMomentum().x(),primary->GetMomentum().y(),primary->GetMomentum().z(), primary->GetEnergy());

     p4eBoostedx = p4eLab.boostX(beta);
     p4eBoostedy = p4eLab.boostY(beta);
     p4eBoostedz = p4eLab.boostZ(beta);
     Now, the question is where to LorentzBoost gammas?
 --Daq 13:26, 3 October 2008 (MDT)

reference

2.) Now take tracking verbose output and by a hand calculation transform the outgoing photon [math]P^{\mu}[/math] to the lab frame

3.) Check EventAction to see if the photon momentum and energy are being passed

10/3/08

1.) In event generator:

Boost electron and gamma and compare with hand calculation. (Units: MeV)

P4e LabFrame w/o boost= (20 ,0 ,0 ,20)
P4e RestFrame w boost= (177.764 ,0 ,0 ,177.764)
P4gamma LabFrame w/o boost = (2.236e-06 ,0 ,0 ,2.236e-06)
P4gamma RestFrame w boost= (1.9874e-05 ,0 ,0 ,1.9874e-05)

Using findBoostToCM() function of Hep3Vector
p4e RestFrame w/ findBoostToCM function= ((-0,-0,-1))
p4gamma RestFrame w/ findBoostToCM function= ((-0,-0,-1))

10/10/08

[math]\beta[/math]=0.975, [math]Ee[/math]=20 MeV

P4e RestFrame w/o boost= (20.0065 ,0 ,0 ,20)
Electron Rest w/o boost mass = 0.511
P4e RestFrame w/ boost= (2.27955 ,0 ,0 ,2.22154)
Electron Rest w/ boost mass = 0.511

[math]\beta[/math]=0.9996737585, [math]Ee[/math]=20 MeV, [math]E\gamma[/math]=2.236 eV

P4e RestFrame w/o boost= (20.0065 ,0 ,0 ,20)
Electron Rest w/o boost mass = 0.511
P4e RestFrame w/ boost= (0.511 ,0 ,0 ,-2.48526e-08)
Electron Rest w/ boost mass = 0.511

P4gamma RestFrame w/o boost = (2.236e-06 ,0 ,0 ,2.236e-06)
P4gamma RestFrame w/ boost= (2.85602e-08 ,0 ,0 ,2.85602e-08)

Simulation

i) No. of events=10,000,000

P4e RestFrame w/ boost= (0.511 ,0 ,0 ,-2.48526e-08)
P4gamma RestFrame w/ boost= (2.85602e-08 ,0 ,0 ,2.85602e-08)
LowEnCompton events=0
-------------------------------------------------------------
lowEnergyLimit(0*eV): Cannot be set below 1 eV, getting G4Exception error message if I set the intrinsic low energy below 1 eV and 1eV > 2.85602e-08 MeV

ii) No. of events executing on inca=100,000,000

 P4e RestFrame w/ boost= (0.511 ,0 ,0 ,-2.48526e-08)
 P4gamma RestFrame w/o boost = (2.236e-06 ,0 ,0 ,2.236e-06)

/home/syed/geant4/LCS/Laser_Compton_Backscattering/output.txt format:

 ComptonEventTrigger/10, ComptonEventCounter, fTrack->GetKineticEnergy())*1000, fTrack->GetPosition().x(), fTrack->GetPosition().y(),
fTrack->GetPosition().z(), fTrack->GetMomentum().x(), fTrack->GetMomentum().y(), fTrack->GetMomentum().z(),
fTrack->GetDefinition()->GetPDGEncoding(), electronKE, electronxPosition, electronyPosition, electronzPosition, electronxMomentum, 
electronyMomentum, electronzMomentum, electronPDGID

10/17/08

The boosted electron and gamma energies seem to be working now

P4e RestFrame w/o boost= (20.0065 ,0 ,0 ,20)
P4e RestFrame w/ boost= (0.511 ,0 ,0 ,-2.48526e-08)
P4gamma RestFrame w/o boost = (2.236e-06 ,0 ,0 ,-2.236e-06)
P4gamma RestFrame w/ boost= (0.000175058 ,0 ,0 ,-0.000175058)

What should gamma energy be after boosting to electron rest frame?

[math]\beta[/math]=0.9996737585
[math]P\gamma_z[/math]= 2.326 eV
Hand calculated value is [math]E\gamma[/math] = 0.03 eV from [math]E\gamma[/math] =2.236 eV.
Computer simulated value is [math]E\gamma[/math] = 0.0285602 eV from [math]E\gamma[/math] =2.236 eV. 
----------------------------------------------------------------------------------------------------
[math]\beta[/math]=0.9996737585
[math]P\gamma_z[/math]= -2.326 eV
Hand calculated value is [math]E\gamma[/math] = 181.05 eV from [math]E\gamma[/math] =2.236 eV.
Computer simulated value is [math]E\gamma[/math] = 175.058 eV from [math]E\gamma[/math] = 2.236 eV.

Now boost the electron and gamma vectors back to the lab frame in Stepping Verbose

 Number of events executed: 20 million

GEANT4_SyedLowEnCompton, [math]E\gamma[/math]:266 nm=4.652 eV (for 532 nm laser), [math]E_e[/math]=20 MeV	GEANT4_SyedLowEnCompton, [math]E\gamma[/math]:266 nm=4.652 eV (for 532 nm laser), [math]E_e[/math]=20 MeV

GEANT4_SyedLowEnCompton, [math]E\gamma[/math]:532 nm=2.326 eV (for 1064 nm laser), [math]E_e[/math]=20 MeV	GEANT4_SyedLowEnCompton, [math]E\gamma[/math]:532 nm=2.326 eV (for 1064 nm laser), [math]E_e[/math]=20 MeV

Equation 1 from Reference File:Chouffani JCPDS 2003 46 pg73.pdf says that the backsattered x-ray energy is given by

[math] (E^{max}_\gamma) [/math]@532nm =

[math] (E^{max}_\gamma) [/math]@1064nm =

10/24/08

Now compare BDSIM output to GEANT4 output with the boosting based Laser compton scattering physics process.

Number of events executed: 1 million

BDSIM, [math]\lambda_{laser}[/math]:266nm (for 532nm laser), [math]E_e[/math]=20 MeV	Angular dependence (Head-on collision)

BDSIM, [math]\lambda_{laser}[/math]:532nm (for 1064nm laser), [math]E_e[/math]=20 MeV	Angular dependence (Head-on collision)

 -------------------------------------------------------------------------------------------------------------------------------------------------

Geant4_lowEnCompton, [math]\lambda_{laser}[/math]:266nm (for 532nm laser), [math]E_e[/math]=20 MeV	Angular dependence (Head-on collision)

Geant4_lowEnCompton, [math]\lambda_{laser}[/math]:532nm (for 1064nm laser), [math]E_e[/math]=20 MeV	Angular dependence (Head-on collision)

Geant4_Compton, [math]\lambda_{laser}[/math]:266nm (for 532nm laser), [math]E_e[/math]=20 MeV	Angular dependence (Head-on collision)

Geant4_Compton, [math]\lambda_{laser}[/math]:532nm (for 1064nm laser), [math]E_e[/math]=20 MeV	Angular dependence (Head-on collision)

A 522 nm wavelength photon is

Why does GEANT4 and BDSIM give a max compton [math]E_{\gamma}[/math] of 7 keV when using an input photon energy of 2.18 eV instead of 14 keV as predicted by the above formula.  A factor of 2 difference exits!

Now that we have source code for a compton scattering process, lets compare its output to some observables.

1.) Check if the [math]\theta[/math] dependence is shown by the simulation

   Done; see above plots

usefull root command:

LCS->makeCode();

or

LCS->MakeClass();

2.) Plot the scattered electron kinetic energy distribution and compare it with predictions from the Klein Nishina formula.

 E_min is 20 MeV for electrons and the code(DiffEKleinNishina.c) is computing E_max for incoming gammas which in LCS case is much smaller, i.e, 2.326 eV! 
 The code will not go through the for loop. Even following the LorentzBoost, E_min=0.511 MeV for electrons and E_gamma=183 eV, the code 
 will not compute DiffEXSect for electrons so today lets talk about working on DiffEKleinNishina.c?

Geant4 "lowEnCompton" [math]\lambda_{laser}[/math]:266nm (for 532 nm laser), [math]E_e[/math]=20 MeV	Geant4 "lowEnCompton" [math]\lambda_{laser}[/math]:532nm (for 1064nm laser), [math]E_e[/math]=20 MeV

Geant4 "Compton" [math]\lambda_{laser}[/math]:266nm (for 532 nm laser), [math]E_e[/math]=20 MeV	Geant4 "Compton" [math]\lambda_{laser}[/math]:532nm (for 1064nm laser), [math]E_e[/math]=20 MeV

3.) Save random number for Comptom event.

   Done

4.) Write Kelin Nishina cross section formula in your Compton scattering physics process.

11/4/08

insert picture of compton event with coordinate system drawn.

1.) E gamma is delta function instead of distribution (conservation of E & P) : Check if outputting correct values from GEANT.

Output for the lowEnCompton:
### Run 0 start.
Start Run processing.

*********************************************************************************************************
* G4Track Information:   Particle = e-,   Track ID = 2,   Parent ID = 0
*********************************************************************************************************

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   1 0 0 800 0 0 -0.885077    511 keV     0 eV    8.8 m     8.8 m         World  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   2 0 0 200 0 0 -0.885077    511 keV     0 eV     60 cm    9.4 m       Tracker  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   3 0 0 0 0 0 -0.885077    511 keV     0 eV     20 cm    9.6 m       Chamber  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   4 0 0 -800 0 0 -0.885077    511 keV     0 eV     80 cm   10.4 m       Tracker  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   5 0 0 -960 0 0 -0.885077    511 keV     0 eV     16 cm  10.56 m    OutOfWorld  Transportation

*********************************************************************************************************
* G4Track Information:   Particle = gamma,   Track ID = 1,   Parent ID = 0
*********************************************************************************************************

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   1 0 0 -800 0 0 0.000349583 349.583 eV      0 eV    8.8 m     8.8 m         World  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   2 0 0 0 0 0 0.000349583 349.583 eV      0 eV     80 cm    9.6 m       Tracker  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   3 0 0 200 0 0 0.000349583 349.583 eV      0 eV     20 cm    9.8 m       Chamber  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   4 0 0 642.575 -0.000183924 -8.58383e-05 -0.000284095 349.15 eV      0 eV 44.2575 cm 10.2426 m       Tracker  LowEnCompton

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   5 -800 -373.365 -593.133 -0.000183924 -8.58383e-05 -0.000284095 349.15 eV      0 eV 1.51868 m  11.7612 m       Tracker  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   6 -960 -448.038 -840.274 -0.000183924 -8.58383e-05 -0.000284095 349.15 eV      0 eV 30.3735 cm 12.065 m    OutOfWorld  Transportation

*********************************************************************************************************
* G4Track Information:   Particle = e-,   Track ID = 3,   Parent ID = 1
*********************************************************************************************************

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   1 45.6923 21.3249 800 0.000183924 8.58383e-05 0.000633678 0.433214 eV      0 eV 16.5304 cm 16.5304 cm      Tracker  Transportation

#Step#      X         Y         Z        KineE    dEStep   StepLeng  TrakLeng    Volume     Process
   2 92.132 42.9985 960 0.000183924 8.58383e-05 0.000633678 0.433214 eV      0 eV 16.8007 cm 33.3311 cm   OutOfWorld  Transportation
G4VisManager: Using G4TrajectoryDrawByCharge as default trajectory model.

------------------------------------------------------------------------------
 output.txt (Rest and Lab frame for photons and electrons, Energy in keV)
  1   0.34915   0   0   642.575   -0.000183924   -8.58383e-05   -0.000284095     <---Scattered Photons in Rest frame
  13.6587 -0.000183924 -8.58383e-05 -0.000284095 22                              <---Scattered Photons in Lab frame
  0.000433214 45.6923   21.3249   800   0.000183924   8.58383e-05   0.000633678  <---Scattered electrons in Rest frame 
  0.0417626 0.000183924 8.58383e-05 0.000633678 11                               <---Scattered electrons in Lab frame

2.) Overlay KE of scatter electron from Klein-Nishina , GEANT4 and BDSIM.

    ./DiffEXsect 0 2.326 1
     Calculating Differential Compton cross section (in barns/eV) for
     0 < E < 1.56555e-05 in steps of 1 and 2 eV incident Photons
     0       63696.3

    ./DiffEXsect 0.1 2.326 1
     Calculating Differential Compton cross section (in barns/eV) for
     0 < E < 1.56555e-05 in steps of 1 and 2 eV incident Photons
     0       63696.3

     ./DiffEXsect 0.1 2.326 1e-5
      Calculating Differential Compton cross section (in barns/eV) for
      0 < E < 1.56555e-05 in steps of 1 and 2 eV incident Photons
      0       63696.3

insert scattered photon theta distribution and energy  and energy -vs- theta

Overlay scattered photon energy with experiment

Go Back

11/14/08

  Simulation events: 10,000,000

1. insert picture of compton event with coordinate system drawn.

2. insert scattered photon theta distribution and energy and energy -vs- theta

GEANT4_SyedCompton (32 MeV electrons and 532 nm laser)	GEANT4_SyedCompton (32 MeV electrons and 532 nm laser)

GEANT4_SyedCompton (38 MeV electrons and 266 nm laser)	GEANT4_SyedCompton (38 MeV electrons and 266 nm laser)

3. Overlay scattered photon energy with experiment

  I tried to overlay using TH2F, energy vs. counts, but no progress. 
  The sample overlay example on hw10 is for TH1F class, probably I need 
  to go into root manual this winter break.

GEANT4_SyedCompton (32 MeV electrons and 532 nm laser)	Experimental Data (~32 MeV electrons and 532 nm laser)

GEANT4_SyedCompton (38 MeV electrons and 266 nm laser)	Experimental Data (~37 MeV electrons and 266 nm laser)

12/12/08

  Syed's LCS final for Fall, 2008:File:Syed LCS Simulation.pdf

Go Back

01/06/09

Overlay scattered photon energy with experiment

  Histograms Overlay Macro:File:LCS Experiment.C

32 MeV electrons and 532 nm laser head-on collision	~37 MeV electrons and 266 nm laser head-on collision

1/21/09

1.) Run MC with different momentum directions (angle w.r.t. laser) , how many event/CPU sec can be generated?

       Here I'm assuming a triangle: a+b+c = 180 with an assumption that -1=180??
       electronGun->SetParticleMomentumDirection(0, 0, 0);            //0 Degree
       electronGun->SetParticleMomentumDirection(0, -0.75, -0.25);    //45 Degree
       electronGun->SetParticleMomentumDirection(0, -0.5, -0.5);      //90 Degree
       electronGun->SetParticleMomentumDirection(0, -0.25, -0.75);    //135 Degree
       electronGun->SetParticleMomentumDirection(0, 0, -1);           //180 Degree

32 MeV electrons and 532 nm laser collision at various incoming electron angles	32 MeV electrons and 532 nm laser collision at various incoming electron angles

2.) Run MC with different electron energies to reproduce shape of distribution in experiment.

      Electron Energies: 26-33 MeV
      Laser wavelength: 532 nm
      

Table of scaling factors, identify # of gun triggers.

3.) Start writing comparison between 2 Physics models.

4.) Start trying out the GPS event generator

a.) need to move boost to LCS physics model instead of ExN02PrimaryGeneratorAction.cc

Then change source file ExN02PrimaryGeneratorAction.cc to have the lines below:

#include "G4GeneralParticleSource.hh"

:myDetector(myDC)
{
 G4int n_particle = 1;
 particleGun = new G4GeneralParticleSource();

1/30/09

1.) Table of scale factors for beam energy changes. create an energy profile for the incident electron beam.

Landau Distribution? Particle_Identification#Electrons_2

2.) Physics Model comparison: GEANT4 with and without Lorentz boost.

side by side graphs of evt.comptonKE before and after your Model changes.

describe transformation equations using template below

3.) Abstract for July 12-16, 2009 HPS annual meeting

   Abstract PDF file:File:Syed HPS 2009 Abstract.pdf

a.) Monochromatic X-ray resolution enhancement of radiography

b.)2 experiments using LCS to create a monochromatic X-ray beam have been done at the IAC

c.) A simulation has been performed to further understand features(insert your words here) of the experiment.

d.) A comparison between the simulation and experiment will be shown as well as actual radiograph images

4.) Use energy distribution from part 1 above to create the distribution using GPS.

2/12/09

Check photon energy calculation:

= 532 nm

= 2.3318 eV

Equation 1 from Reference File:Stepanek NIMA 412 1998pg174.pdf says that the backsattered x-ray energy In the Lab Frame is given by

Transform from the LAB frame to a reference frame in which the electron is at rest: Find [math] \beta_{CM} [/math] such that

The relativistic transformation matrix for the four momentum is given by

= 296.6 eV

2/20/09

Based on 2/12/09 discussions, we created a global class "SharedLCSValues" to store electron's energy and calculate beta, gamma, and LorentzBoost conversion factors.

#ifndef LCSGLOBALS_HH
#define LCSGLOBALS_HH 1
#include "globals.hh"

class SharedLCSValues{
public:
  SharedLCSValues(); //constructor
  void setElectronEnergy(G4double);
  G4double getElectronEnergy();
  G4double getBetaCalculated();
  G4double getComptonLorentzFactor();
  ~SharedLCSValues(); //destructor
private: 
  G4double IncomingElectronEnergy;
  G4double BetaCalculated;
  G4double GammaCalculated;
  G4double ComptonLorentzFactor;
};

#endif




-----------------
//
// Authors: Syed F. Naeem, Tony Forest
//          Syed F. Naeem (syed@physics.isu.edu)
//
// History:
// -----------
// 19 Feb 2007    1st implementation
// -------------------------------------------------------------------

// Class description:
// Beta and gamma calculations for incoming electrons

// -------------------------------------------------------------------

#include "LCSGlobals.hh"

SharedLCSValues::SharedLCSValues(){IncomingElectronEnergy = BetaCalculated = GammaCalculated = ComptonLorentzFactor =  0.0;}

void SharedLCSValues::setElectronEnergy(G4double value){
  IncomingElectronEnergy = value;

  if (IncomingElectronEnergy <= 0)
    {
      G4Exception("LCSGlobals::LCSGlobals - Electron energy outside intrinsic process validity range");
    }
}

G4double SharedLCSValues::getElectronEnergy(){
  return IncomingElectronEnergy;
}


G4double SharedLCSValues::getBetaCalculated(){

  BetaCalculated = IncomingElectronEnergy/(sqrt(IncomingElectronEnergy*IncomingElectronEnergy+0.511*0.511));
  return BetaCalculated;
}

G4double SharedLCSValues::getComptonLorentzFactor(){

  BetaCalculated = IncomingElectronEnergy/(sqrt(IncomingElectronEnergy*IncomingElectronEnergy+0.511*0.511));
  GammaCalculated = 1/sqrt(1-BetaCalculated*BetaCalculated);
  ComptonLorentzFactor = GammaCalculated*(1-BetaCalculated);

  return ComptonLorentzFactor;
}

SharedLCSValues::~SharedLCSValues(){}

GPS energy commands

/gps/ene/type Pow
/gps/ene/alpha  2 #y = AE^alpha

#/gps/ene/A 5?

/gps/ene/min 5 MeV
/gps/ene/max 32 MeV

Do a power law fit to the graph

2/26/09

gpsvis.mac
/control/verbose 2
/run/verbose 2
/random/setSavingFlag 1
#
# create empty scene
#
           #/vis/scene/create
#
# Create a scene handler for a specific graphics system
# (Edit the next line(s) to choose another graphic system)
#
           #/vis/open OGLIX
# draw scene
#
           #/vis/viewer/set/viewpointThetaPhi 90 180 deg
           #/vis/viewer/zoom 1.4
           #/vis/viewer/flush

# for drawing the tracks
# (if too many tracks cause core dump => storeTrajectory 0)
           #/tracking/storeTrajectory 1
           #/vis/scene/add/trajectories
# (if you prefer refreshing each event, comment out next line)
           #/vis/scene/endOfEventAction accumulate
#

/event/verbose 0
/tracking/verbose 2 

#Particle's Momentum direction, electron in our case
#Commented following lines in PrimaryGeneratorAction.cc:
####//electronGun->SetParticleMomentumDirection(G4ThreeVector(0., 0., -1));
####//electronGun->SetParticleEnergy( p4eRestFrame->e());
# We instead are setting electrons momentum direction in gpsvis.mac as follows:

/gps/direction 0. 0. -1.
/gps/ene/type Pow
/gps/ene/alpha 2

#circular plane source
/gps/pos/type Plane
/gps/pos/shape Circle
/gps/pos/radius 1.5 cm

/gps/ene/min 26. MeV
/gps/ene/max 33. MeV

/run/beamOn 1000000
exit

Power-law Distribution graphs (26-33 MeV Electrons):

3/12/09

1.) alter power law fit plot so data has error bars and symbols, fit has thick solid black line. Legend describes symbols. Rebin plot in 1 keV wide energy bins

2.) work on the three sections shown in the paper part of the wiki

3.) do a simulation with power law alpha = 10.5, increase alpha again until drop off in simulation is like drop off in data

4.) save random number seed for a compton event so we can look at one easily

The run manager is deleting itself after specified runs?

5.) insert equations from E_gamma and Lorentz boosts into paper theory section

3/19/09

I showed my plots to Khalid and he said that there is an electron energy spread of <1%. The tail in LCS spectra was due to the deviation of incoming electrons w.r.t laser. He further said that Geant4 is good only for head-on collisions and the Lorentz Boost is different for angular deviations, which Geant4 doesn't cover.

Since GEANT4 is open source we can fix problems.  
You know GPS can change the angle and you installed 
the Lorentz transformation.  All we need to do is 
be sure that you transform correctly.

How much energy spread gives you the tail in above X-ray distributions?

Let's print out an off axis (non head-on) collision event 
from GEANT4 and see if Khalid agrees with the kinematic calculation

Commented by Syed: Thanks for the response Dr. Forest. Let me run simulations, 
by changing angles w.r.t some constant number of events, and discuss the results 
tomorrow and probably let's have a meeting altogether with Khalid to be on the same page.

We should printout and check an event before meeting with Khalid

Do we need to dig into LorentzBoost class or should I start working on X-rays for XRF purposes since we know how experimental LCS X-rays look like, I think the agenda I would like to discuss with you this Friday!

We checked the boost and found 1 problem already.   
Lets check the boost for an off axis event.

XRF will only be useful if we get a nuclear model that works.

Enclosed are some of the plots considering the case of 32.5 MeV electrons with 1% energy spread and 532nm laser. Off-axis electrons so far have no effect. Tracking data files are huge so I will bring my laptop to go over these files.

GPS Macro

...
...
...
#/gps/direction 0. 0. -1	 #Head-on collision
#/gps/direction 0. 5. -1.	 #11.09 degrees off-axis
#/gps/direction 0. -5. -1.	 #11.09 degrees off-axis
#/gps/direction 0. -0.75 -0.25	 #45 degrees off-axis
#/gps/direction -0.25 -0.25 -0.5 #90 degrees off-axis

/gps/ene/type Pow
#/gps/ene/alpha 11.5            #Default alpha = 0

/gps/ene/min 32.175 MeV         #1% energy spread
/gps/ene/max 32.5 MeV
#/gps/ene/ezero 2.


/run/beamOn 1000000
exit

= 0.0, Head-on Collision

= 0.0, Default GPS direction

= 0.0, 11.09 degrees deviation

= 0.0, 45 degrees deviation

= 0.0, 90 degrees deviation

Eq. (5) in Stepanek J. paper

Where,

eV for 532nm laser

MeV

Solve [math]E_\gamma[/math] for various [math]\theta[/math]:

@@ Line 1,901: / Line 1,901: @@
 [[Image:EnergySpread_03-19-09c.jpg | 400 px] |thumb|  <math>\alpha</math> = 0.0, 90 degrees deviation]]
-:<math>E_\gamma = \frac{4\gamma^2E_{laser}}{1 + \frac{4\gamma E_{laser}}{m_{0}c^2} + \gamma^2 \theta^2}</math>
+:<math>E_\gamma = \frac{4\gamma^2E_{laser}}{1 + \frac{4\gamma E_{laser}}{m_{0}c^2} + \gamma^2 \theta^2}</math> Eq. (5) in Stepanek J. paper
 Where,
 :<math>\gamma = \frac{32.5MeV + 0.511MeV}{0.511MeV} = 64.600782</math>

Difference between revisions of "LaserComptonScat"

Revision as of 05:19, 20 March 2009

Contents

LCS model paper

Formulas

Compton [math]E_{gamma}[/math] kinematic

Lorentz boost

2/7/08

2/14/08

2/28/08

3/6/08

3/13/08

3/20/08

4/10/08

4/17/08

4/24/08

5/1/08

6/12/08

Compiling on brems

Submitting batch jobs on brems

9/5/08

9/26/08

10/3/08

10/10/08

10/17/08

10/24/08

11/4/08

11/14/08

12/12/08

01/06/09

1/21/09

1/30/09

2/12/09

2/20/09

GPS energy commands

2/26/09

3/12/09

3/19/09

Navigation menu

Search