CAEN V260 Scalr: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 29: | Line 29: | ||
value = 0 = 0x0 | value = 0 = 0x0 | ||
= Status function = | |||
-> v260Status(0,1) | |||
STATUS for SCALER id 0 at base address 0x90da0000 | |||
-------------------------------------------------- | |||
Version = 0x10dc Module Type = 0x080d | |||
Scalers ENABLED | |||
Scaler Data : | |||
SCAL01: 0 SCAL02: 0 SCAL03: 0 SCAL04: 0 | |||
SCAL05: 0 SCAL06: 0 SCAL07: 0 SCAL08: 0 | |||
SCAL09: 0 SCAL10: 0 SCAL11: 0 SCAL12: 0 | |||
SCAL13: 0 SCAL14: 0 SCAL15: 0 SCAL16: 28 | |||
value = 0 = 0x0 | |||
[http://www.iac.isu.edu/mediawiki/index.php/VME_modules back to VME modules] | [http://www.iac.isu.edu/mediawiki/index.php/VME_modules back to VME modules] | ||
Revision as of 18:00, 31 October 2007
Setting address
The address pins on this module are not labeled so I adopted the convention of numbering them from left to right as I look from the front pannel.
| Address | |
| Pin | Setting |
| SW 1 | D |
| SW 2 | A |
| SW 3 | 0 |
| SW 4 | 0 |
Initializing from ROC console
The V260 library has an initialization function called v260Init to use for getting a pointer to its VME memory location. The scaler uses A24 bit addressing so you need to add 2 zeros at the end.
-> v260Init 0xda0000 Initialized SCALER ID 0 at address 0x90da0000 value = 0 = 0x0
Status function
-> v260Status(0,1)
STATUS for SCALER id 0 at base address 0x90da0000
--------------------------------------------------
Version = 0x10dc Module Type = 0x080d
Scalers ENABLED
Scaler Data :
SCAL01: 0 SCAL02: 0 SCAL03: 0 SCAL04: 0
SCAL05: 0 SCAL06: 0 SCAL07: 0 SCAL08: 0
SCAL09: 0 SCAL10: 0 SCAL11: 0 SCAL12: 0
SCAL13: 0 SCAL14: 0 SCAL15: 0 SCAL16: 28
value = 0 = 0x0