CAEN V260 Scalr: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 23: | Line 23: | ||
The V260 library has an initialization function called v260Init to use for getting a pointer to its VME memory location. | The V260 library has an initialization function called v260Init to use for getting a pointer to its VME memory location. | ||
The scaler uses A24 bit addressing so you need to add 2 zeros at the end. | |||
-> v260Init 0xda0000 | |||
Initialized SCALER ID 0 at address 0x90da0000 | |||
value = 0 = 0x0 | |||
[http://www.iac.isu.edu/mediawiki/index.php/VME_modules back to VME modules] | [http://www.iac.isu.edu/mediawiki/index.php/VME_modules back to VME modules] | ||
Revision as of 19:16, 25 October 2007
Setting address
The address pins on this module are not labeled so I adopted the convention of numbering them from left to right as I look from the front pannel.
| Address | |
| Pin | Setting |
| SW 1 | D |
| SW 2 | A |
| SW 3 | 0 |
| SW 4 | 0 |
Initializing from ROC console
The V260 library has an initialization function called v260Init to use for getting a pointer to its VME memory location. The scaler uses A24 bit addressing so you need to add 2 zeros at the end.
-> v260Init 0xda0000 Initialized SCALER ID 0 at address 0x90da0000 value = 0 = 0x0