Difference between revisions of "CED Verification of DC Angle Theta and Wire Correspondance"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
<center><math>\textbf{\underline{Navigation}}</math> | <center><math>\textbf{\underline{Navigation}}</math> | ||
− | [[ | + | [[Determining_wire-theta_correspondence|<math>\vartriangleleft </math>]] |
[[VanWasshenova_Thesis#Determining_wire-theta_correspondence|<math>\triangle </math>]] | [[VanWasshenova_Thesis#Determining_wire-theta_correspondence|<math>\triangle </math>]] | ||
[[Detector_Geometry_Simulation|<math>\vartriangleright </math>]] | [[Detector_Geometry_Simulation|<math>\vartriangleright </math>]] |
Revision as of 18:17, 15 May 2017
Using CED to verify the angle and wire correlation,
Zooming in on the view paralell to the direction of the wires in ced, we can examine the wire corresponding theta angle in the drift chamber.
Coordinates(cm) | Layer 1 | Layer 2 | Layer 3 | Layer 4 | Layer 5 | Layer 6 |
---|---|---|---|---|---|---|
x | 20.42 | 21.51 | 21.39 | 22.49 | 22.37 | 23.47 |
y | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
z | 243.41 | 244.18 | 245.51 | 246.28 | 247.62 | 248.38 |
Coordinates(cm) | Layer 1 | Layer 2 | Layer 3 | Layer 4 | Layer 5 | Layer 6 |
---|---|---|---|---|---|---|
x | 21.64 | 22.73 | 22.61 | 23.71 | 23.58 | 24.69 |
y | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
z | 242.86 | 243.62 | 244.94 | 245.71 | 247.05 | 247.81 |
Corresponding theta angles can be found for other wires, in Region 1, Superlayers 1 and 2.
Wire Number | Layer 1 | Layer 2 | Layer 3 | Layer 4 | Layer 5 | Layer 6 |
---|---|---|---|---|---|---|
1 | 4.79 | 5.03 | 4.98 | 5.22 | 5.16 | 5.40 |
2 | 5.09 | 5.33 | 5.27 | 5.51 | 5.45 | 5.69 |
77 | 29.46 | 29.60 | 29.41 | 29.55 | 29.37 | 29.51 |
78 | 29.79 | 29.93 | 29.74 | 29.88 | 29.69 | 29.83 |
79 | 30.12 | 30.26 | 30.07 | 30.21 | 30.02 | 30.16 |
110 | 40.19 | 40.28 | 40.05 | 40.13 | 39.91 | 39.99 |
111 | 40.51 | 40.59 | 40.36 | 40.44 | 40.21 | 40.29 |
112 | 40.82 | 40.90 | 40.67 | 40.75 | 40.52 | 40.60 |