Difference between revisions of "IAC-Peak Sensing Measurements"
Jump to navigation
Jump to search
Line 66: | Line 66: | ||
|Run Number || +ve sqaure input pulse amplitute (v) +_ 0.02 ||CH# || Notes | |Run Number || +ve sqaure input pulse amplitute (v) +_ 0.02 ||CH# || Notes | ||
|- | |- | ||
− | |6078 || 3.10 ||1538 || | + | |6078 || 3.10 ||1538 +_ 2 || |
|- | |- | ||
− | | 6079 || 4.10 | + | | 6079 || 4.10|| 1405 +_ 3 || |
− | + | |- | |
+ | | 6080 || 1.10 || | ||
Revision as of 23:59, 20 September 2013
09/05/13
Detector voltage is 2.8, 3.4 kV for cathode and GEM.
Run Number | Notes | |
5869 | shutter open x | |
5872 | shutter close x | |
5873 | shutter open x | |
5876 | shutter open x | |
5877 | shutter close x | |
5884 | shutter close 1 | ![]() |
5885 | shutter open 1 | ![]() |
Run Number | Amp level | discriminator level | Notes | |
5925 | 50, 4 | 3.6 | shutter close | |
5926 | 50, 4 | 3.6 | shutter open | |
5927 | 100 | 3.6 | shutter open | |
5928 | 200 | 3.6 | shutter open, high amp level | |
5929 | 100, 10 | 3.6 | shutter open high amp level | |
5930 | 100, 7 | 3.6 | shutter open | |
5936 | 100, 7 | 0.1 | shutter open, noise peak channel 74 | |
5937 | 100, 7 | 0.1 | shutter open, V_cath = V_GEM,noise peak channel 74 | |
5948 | 100, 7 | 1.15 | shutter open, detector is on, no signal overlapping, reached to te signal highest rate, with almost 100% signal to noise ratio. |
The following run has the same setting as the last run, unless there is achange written in the notes.
Charge Calibration
The peak sensing ADC was calibrated using stanford pulse generator, using hte same settings for the spectroscopic amplifier (coarse gain is 100, intergrate is 1, BLR high), the amp. (bipolar) output is delayed then send to the peak sensing ADC ch#7.
Run Number | +ve sqaure input pulse amplitute (v) +_ 0.02 | CH# | Notes |
6078 | 3.10 | 1538 +_ 2 | |
6079 | 4.10 | 1405 +_ 3 | |
6080 | 1.10 |
|
Cath_3400 GEM_2800V
Run Number | start time | end time | time difference | Unix Start time | Unix End time | Unix Time diff | Scaler time | shutter | Notes |
5948 | 14:22:14 | 14:36:09 | 00:13:55 | 20:22:14 | 20:36:07 | 00:13:53 | 305,502 | open | scalar time does not match the others |
5949 | 15:02:43 | 15:19:59 | 00:17:16 | 21:02:43 | 21:19:56 | 00:17:13 | 377,148 | open | scalar time does not match the others |
5950 | 15:20:42 | 15:35:07 | 00:14:25 | 21:20:42 | 21:35:04 | 00:14:22 | open | r5951 and r5952 has the shutter close and integrate 1 | |
5951 | 22:41:29 | 22:08:12 | 00:32:47 | close | |||||
5952 | 22:12:44 | 22:35:34 | 00:22:50 | close | |||||
5953 | 16:37:03 | 15:35:07 | 00:02:04 | 22:37:03 | 22:45:38 | 00:07:35 | close | integrate lower from 1 to 0.5,sthg strange happened, root does not show a picture and the rate increased suddenly to 450 Hz | |
5957 | 09:01:07 | 09:25:12 | 00:24:05 | 15:01:07 | 15:25:10 | 00:24:03 | open | integrate 0.5 | |
5959 | 09:30:21 | 09:55:15 | 00:24:53 | 15:30:21 | 15:55:12 | 00:24:50 | close | integrate 1 |
Cath_3350 GEM_2750V
Run Number | start time | end time | time difference | Unix Start time | Unix End time | Unix Time diff | shutter | Notes |
5960 | 09:58:42 | 10:30:28 | 00:31:46 | 15:58:42 | 16:30:25 | 00:31 :43 | close | |
5961 | 10:30:49 | 11:11:50 | 41'01" | 16:30:49 | 17:11:47 | 40' 58" | close | |
5962 | 11:13:03 | 11:28:21 | 15'18" | 17:13:03 | 17:28:18 | 15' 15" | close | |
5963 | 11:32:44 | 11:58:39 | 25' 55" | 17:32:43 | 17:58:37 | 25' 52" | open | |
5964 | 11:59:17 | 12:21:59 | 22' 42" | 17:59:17 | 18:21:56 | 22' 39" | open | |
5965 | 12:22:24 | 12:42:38 | 20'14" | 18:22:24 | 18:42:36 | 20' 12" | open |
|
Cath_3300 GEM_2700V
Run Number | start time | end time | shutter | Notes |
5967 | 19:22:05 | 19:48:42 | open | scaler not counting Hz pulse (run 5976 was counting) |
5968 | 19:49:04 | 20:15:44 | open | |
5969 | 20:15:44 | 20:47:18 | open | |
5978 | 11:33:33 | 11:48:05 | close | |
5979 | 11:48:27 | 11:59:49 | close | |
5980 | 12:00:17 | 12:31:03 | close |
|
Cath_3250 GEM_2650V
Run Number | start time | end time | shutter | Notes |
5972 | 20:52:15 | 21:15:18 | open | |
5973 | 06:43:29 | 07:29:57 | open | |
5974 | 07:30:49 | 08:17:48 | open | |
5975 | 08:23:58 | 09:30:48 | close | |
5976 | 09:33:58 | 10:42:48 | close | |
5977 | 10:43:11 | 11:31:26 | close |
|
Cath_3200 GEM_2600V
Run Number | start time | end time | shutter | Notes |
5983 | 17:42:06 | 22:07:02 | close | |
5984 | 17:42:06 | 06:43:46 N | close | very low noise level |
5985 | 06:44:44 | 12:10:48 | close | |
5986 | 12:14:53 | 12:59:45 | open | |
6047 | 18:44:41 | 21:21:49 | open |
|
Cath_3150 GEM_2550V
Run Number | start time | end time | shutter | Notes |
5954 | 16:55:52 | 08:44:23 N | close | integrate 1 rate changed from 1.2 Hz to 57 Hz due to increase the noise level overnight only. |
5966 | 12:44:21 | 19:15:35 | open |