Difference between revisions of "2012AnnihCountrRateEstimate"
Jump to navigation
Jump to search
Line 10: | Line 10: | ||
;HpGe observed about 1 annihilation photon per 10 microCoulombs of electrons on the upstream Tungsten target | ;HpGe observed about 1 annihilation photon per 10 microCoulombs of electrons on the upstream Tungsten target | ||
− | :Ratio of annihilation photons observed when using positrons to electrons | + | :Ratio of annihilation photons observed when using positrons to electrons 120: |
{| border="3" cellpadding="20" cellspacing="0" | {| border="3" cellpadding="20" cellspacing="0" |
Revision as of 17:19, 19 January 2012
Rate Estimates
Previous experiment at the IAC
IAC apparatus for positron production experiment | Counts observed when the dipole is tuned to direct positrons onto the Ta target | Counts from electrons on Ta target |
- HpGe observed about 1 annihilation photon per 10 microCoulombs of electrons on the upstream Tungsten target
- Ratio of annihilation photons observed when using positrons to electrons 120:
Condition | Grade Calculation |
If all Homework is complete and Simulation project is turned in on time | (50%) Homework + (50%)(Simulation Project) |
If 1 homework set is incomplete or more than 48 hours late | (60%)Homework + (40%)(Simulation Project) |
Otherwise | (70%)Homework + (30%)(Simulation Project) |
NaI rate Ratio of positron to electron beam
Assumed Geometry
Assume a 2 mm thick Tungsten target that is 1" square
The target is located at -80 < Z < -80.2 The NaI crystal is 2.32" or 56.49 mm in diameter The NaI crystal is 8" from the target then the opening angle is atan(2.32/8/2) = 8.25 degrees