Difference between revisions of "MINIDC MinVoltageStudy"
Jump to navigation
Jump to search
Line 77: | Line 77: | ||
|Scope Image | |Scope Image | ||
|- | |- | ||
− | |1705 || -855|| [[Image: | + | |1705 || -855|| [[Image:SenseWire4_1705V_Cosmic_10-12-07.jpg | 200 px]] |
|- | |- | ||
|1695 || -850|| [[Image:SenseWire4_1695V_Cosmics_10-12-07.jpg | 200 px]] | |1695 || -850|| [[Image:SenseWire4_1695V_Cosmics_10-12-07.jpg | 200 px]] |
Revision as of 17:29, 15 October 2007
Operating Voltage Study
We will lower the operating voltage and take scope pictures to determine the operating point for the mini chamber.
SenseWire 1
Preamplifier voltage was set to 5.9 Volts.
Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
1700 | -850 | |
1690 | -845 | |
1680 | -840 | |
1670 | -835 | |
1660 | -830 | |
1650 | -825 |
Sense wire 2
Preamplifier voltage was set to 5.9 Volts. We saw a lot of noise ( 40 mV peak to peak) when increasing the preamp voltage from 2.2 V to 5.7 Volts. After 5.7 volts the noise when back to a noise level of 8 mV peak to peak which is smaller than the 16 mV peak to peak noise observed 3 days ago on the sense wire (capacitor side)before the preamp.
Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
1700 | -850 | |
1690 | -845 | 200 px |
SenseWire 3
Preamplifier voltage was set to 5.9 Volts.
Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
1700 | -850 | |
1690 | -845 | |
1685 | -845 | |
1675 | -840 | |
1665 | -836 | |
1655 | -831 | |
1645 | -826 | |
1635 | -820 |
SenseWire 4
Preamplifier voltage was set to 5.9 Volts.
Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
1705 | -855 | |
1695 | -850 | |
1685 | -845 | |
1675 | -840 |
SenseWire 5
Preamplifier voltage was set to 5.9 Volts.
Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
1700 | -850 | 200 px |
1690 | -845 | 200 px |
SenseWire 6
Preamplifier voltage was set to 5.9 Volts.
Sense Wire HV (Volts) | Field Wire HV (Volts) | Scope Image |
1700 | -850 | 200 px |
1690 | -845 | 200 px |