Difference between revisions of "Vendors for parts"
| Line 29: | Line 29: | ||
Gasket Cord: part# CB1000-2.36 ; a 2.36 outer diameter O-ring cord which wee can use to make O-rings. The O-grin groove should be 1.77 mm deep and you can use superglue to joing the ends of the cord. | Gasket Cord: part# CB1000-2.36 ; a 2.36 outer diameter O-ring cord which wee can use to make O-rings. The O-grin groove should be 1.77 mm deep and you can use superglue to joing the ends of the cord. | ||
| + | |||
| + | Specifications | ||
| + | |||
| + | |||
| + | |||
| + | Compound# Color Hardness | ||
| + | Shore A Tensile | ||
| + | Mpa (Psi) Elongation % 22Hr C/S | ||
| + | @ 100C Low Temp High Temp | ||
| + | B1000 Black 70 15.0 (2,150) 400 10 –40°C(–40°F) 120°C(248°F) | ||
| + | * Buna-N is available in a wide range of Durometers and Colors, | ||
== Copper Clad Kapton == | == Copper Clad Kapton == | ||
== wave soldering == | == wave soldering == | ||
== output connectors == | == output connectors == | ||
Revision as of 18:20, 8 June 2007
Ionization Chamber material
Modern Plastics
Source of Ertalyt and G10/FR4 plastic sheets
Address: 676 Howard Ave, Bridgeport, CT, 06605-0574
Phone: (203) 333-3128 / (800) 243-9696
sales reps: Vicky Rivera vrivera@modernplastics.com
Some previously used materials:
Ertalyte, PET NAT PET-P Plate natural
G10/FR4
Kapton windows
Gas connectors
Gas Gaskets
Marco Rubber
Marco Rubber & Plastic Products, Inc. 334 Clark Street North Andover, MA 01845 USA Telephone: 800-775-6525 Fax: 978-688-6915
Gasket Cord: part# CB1000-2.36 ; a 2.36 outer diameter O-ring cord which wee can use to make O-rings. The O-grin groove should be 1.77 mm deep and you can use superglue to joing the ends of the cord.
Specifications
Compound# Color Hardness Shore A Tensile Mpa (Psi) Elongation % 22Hr C/S @ 100C Low Temp High Temp B1000 Black 70 15.0 (2,150) 400 10 –40°C(–40°F) 120°C(248°F)
- Buna-N is available in a wide range of Durometers and Colors,