Difference between revisions of "X-talk between n-dets"

From New IAC Wiki
Jump to navigation Jump to search
Line 78: Line 78:
  
 
[[File:all_particles_2inBorPoly2inPb2cmAl.png | 400px]]
 
[[File:all_particles_2inBorPoly2inPb2cmAl.png | 400px]]
 +
 +
NO neutrons observed.
 +
 +
NO photons observed.
 +
 +
and the following number of protons:
 +
 +
[[File:protons_2inBorPoly2inPb1cmAl.png | 400px]]

Revision as of 16:12, 19 August 2014

The simulation of the cross talk between two neutron detectors was performed using GEANT4 program. The simulated detector layout is shown below:

Detector shielding setup.png

The following stages of simulation of the x-talk were considered:

1) the x-talk effect is due to the acceptance of the analysing detector, i.e. there was no shielding in between the two detectors;

2) only 2" of borated poly was placed in between;

3) borated poly was placed in between two layers of 1" lead layers;

4) 2 cm Al layer was added to the shielding described in stages 1)-3) from the side of the analysing detector.

The number of incident particle (neutrons) was [math]10^5[/math] and their energy spectrum is shown below:

Espectrum incident neutrons.png

Neutrons were incident uniformly over the surface of one of the neutron detectors normally to the surface w/o hitting the shielding and the analysing detector such that we have pure x-talk effect due to neutron interaction with the material BC-420 of the neutron detector being irradiated. The analysing detector detected all the particles scattered/produced in the shielding/BC-420.

Stage 1 of the simulation

The energy spectrum of all possible particles entering the analysing detector is presented below:

All particles noShield.png

Out of the cumulative particle energy spectrum we have the following number of neutrons:

Neutrons noShield.png

the following number of photons:

Photons noShield.png

and the following number of protons:

Protons noShield.png

Stage 2 of the simulation

The energy spectrum of all possible particles entering the analysing detector after placing 2" of borated poly in between the detectors is presented below:

All particles 2inBorPoly.png

Out of the cumulative particle energy spectrum we have the following number of neutrons:

Neutrons 2inBorPoly.png

the following number of photons (photon peak ~2.2MeV can be seen as a result of neutron capture reaction):

Photons 2inBorPoly.png

and the following number of protons:

Protons 2inBorPoly.png

Stage 3 of the simulation

The energy spectrum of all possible particles entering the analysing detector after adding 2 layers of 1" lead placed at the sides of the 2" borated poly is presented below:

All particles 2inBorPoly2inPb.png

Out of the cumulative particle energy spectrum we have the following number of neutrons:

NO neutrons observed.

the following number of photons:

Photons 2inBorPoly2inPb.png

and the following number of protons:

Protons 2inBorPoly2inPb.png

Stage 4 of the simulation

The energy spectrum of all possible particles entering the analysing detector after adding 2 cm of Aluminium to 2 layers of 1" lead placed at the sides of the 2" borated poly is presented below:

All particles 2inBorPoly2inPb2cmAl.png

NO neutrons observed.

NO photons observed.

and the following number of protons:

Protons 2inBorPoly2inPb1cmAl.png