Difference between revisions of "X-pinch driver 2-bricks fabrication"

From New IAC Wiki
Jump to navigation Jump to search
(Blanked the page)
 
(283 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[https://wiki.iac.isu.edu/index.php/RS#Compact_and_Portable_X-Pinch_Driver go back]]
 
  
−
 
−
12/10/13
 
−
*brick housing (BH) parts (steel/AL/PMMA sheets) drawings approved by Spielman (drawings #2013.1.001.0002-0009)
 
−
 
−
 
−
12/11/13
 
−
*The list of possible manufacturing company for BH parts production is established:
 
−
**Partner Steel Co, Inc, Pocatello;
 
−
**Valley Sheet Metal (VSM) Technologies, Idaho Falls;
 
−
**Primear Technology, Blackfoot;
 
−
**Northwest wire EDM, Spokane, WA;
 
−
**Nelson Metal Technology, Payette, ID;
 
−
**Water Jet Cutting, Albuquerque;
 
−
*All above companies have been contacted for quotes. Criteria were price and speed of production.
 
−
*VSM Technologies: selected as manufactured company for BH parts (drawings #2013.1.001.0002-0009)
 
−
 
−
 
−
12/17/19
 
−
*BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.
 
−
 
−
 
−
12/18/19
 
−
*Cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)
 
−
*PMMA_Output_Sheet/Charging_Isolating_Tube drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019)
 
−
*X-pinch driver assembly drawing with included cathode/anode submitted to Spielman for approving (drawing #2013.1.001.0020)
 
−
*PARKER's Viton O-rings V0769-60 2-246 (2 pcs), ID 4 1/2 and W 1/8", selected for vacuum seal inside the cathode/anode section.
 
−
 
−
 
−
12/19/13
 
−
*LESKER reduced 4-way cross (C-0800-275, $890) found as a candidate for vacuum chamber
 
−
*LESKER reduced 4-way cross drawing downloaded and incorporated into SolidWorks (assembly file Lesker_C-800_275\C-0800-275_reassembled)
 
−
*LESKER reduced 4-way cross redesigned to match our x-pinch driver (drawing file Lesker_C-800_275\LESKER_C-0800-275_REASSEMBLED)
 
−
 
−
 
−
12/20/13
 
−
*Some changes to parts have been done to accommodate LESKER redesigned cross:
 
−
**1) for Al output plate, the inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008);
 
−
**2) for anode can, the slot size increased from 0.4" to 0.5" to march x-pinch wires length  (drawing #2013.1.001.0014);
 
−
*Reassembled LESCER cross drawing submitted to Spielman for approving (drawing LESKER C-0800-275_REASSEMBLED)
 
−
*X-pinch driver assembly drawing with included cathode/anode/cross submitted to Spielman for approving (drawing #2013.1.001.0010-0021)
 
−
 
−
 
−
 
−
To Do List:
 
−
*o-ring in PMMA ~3 mm. Locate position and include in drawing. (Done)
 
−
*Include groove for two o-rings into the isolating output PMMA drawing #2013.1.001.0010-0018
 
−
*Can we use cross instead of cube? (A: Cross - no, but reduced cross - yes)
 
−
*Fabricate anode/cathode/vacuum_chamber
 
−
*Locate vacuum pump
 
−
*Diagnostics: Rogowskii and B-Dot, design and include in drawing
 

Latest revision as of 22:40, 22 January 2014

Retrieved from "https://wiki.iac.isu.edu/index.php?title=X-pinch_driver_2-bricks_fabrication&oldid=90768"