Difference between revisions of "X-pinch driver 2-bricks fabrication"

From New IAC Wiki
Jump to navigation Jump to search
(Blanked the page)
 
(300 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[https://wiki.iac.isu.edu/index.php/RS#Compact_and_Portable_X-Pinch_Driver go back]]
 
  
 
12/10/13
 
*brick housing (BH) parts (steel/AL/PMMA ) drawings approved by Spielman (drawings #2013.1.001.0002-0009)
 
 
 
12/11/13
 
*VSM Technologies selected as manufactured company for BH parts (drawings #2013.1.001.0002-0009)
 
 
 
12/17/19
 
*BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.
 
 
 
12/18/19
 
*Cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)
 
*PMMA_Output_Sheet/Charging_Isolating_Tube drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019)
 
*Assembly drawing with included cathode/anode submitted to Spielman for approving (drawing #2013.1.001.0020)
 
 
 
12/19/13
 
*LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber
 
*LESKER reduced 4-way cross drawing downloaded and incorporated into SolidWorks (assembly file Lesker_C-800_275\C-0800-275 reassembled)
 
*LESKER reduced 4-way cross redesigned to match our x-pinch driver (drawing file Lesker_C-800_275\LESKER_C-0800-275_REASSEMBLED)
 
 
 
12/20/13
 
**Some changes to parts have been done to accommodate cross drawing:
 
***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008);
 
***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length  (drawing #2013.1.001.0014);
 
*LESKER C-0800-275 REASSEMBLED drawing submitted to Spielman for approving (drawing LESKER C-0800-275 REASSEMBLED)
 
*The assembly drawing with included cathode/anode/cross submitted to Spielman for approving (drawing #2013.1.001.0010-0021)
 

Latest revision as of 22:40, 22 January 2014