Difference between revisions of "X-pinch driver 2-bricks fabrication"

From New IAC Wiki
Jump to navigation Jump to search
(Blanked the page)
 
(304 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[https://wiki.iac.isu.edu/index.php/RS#Compact_and_Portable_X-Pinch_Driver go back]]
 
  
 
12/10/13
 
*brick housing (BH) parts (steel/PMMA) drawings approved by Spielman (drawings #2013.1.001.0002-0009)
 
 
12/11/13
 
*VSM Technologies selected as manufactured company for BH drawings  (drawings #2013.1.001.0002-0009)
 
 
12/17/19
 
*BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.
 
 
12/18/19
 
*cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)
 
*PMMA_output/isolating_charging_line drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019)
 
 
12/19/13
 
*LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber
 
 
12/20/13
 
*LESKER reduced 4-way cross redesigned and reassembled to match our x-pinch facility (drawing LESKER C-0800-275 REASSEMBLED) and submitted to Spielman for approving
 
*The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021)
 
**Al output plate changes:
 
***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008);
 
***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length  (drawing #2013.1.001.0014);
 

Latest revision as of 22:40, 22 January 2014