Difference between revisions of "X-pinch driver 2-bricks fabrication"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
12/10/13 | 12/10/13 | ||
*brick housing (BH) parts (steel/PMMA) drawings approved by Spielman (drawings #2013.1.001.0002-0009) | *brick housing (BH) parts (steel/PMMA) drawings approved by Spielman (drawings #2013.1.001.0002-0009) | ||
| + | |||
12/11/13 | 12/11/13 | ||
*VSM Technologies selected as manufactured company for BH drawings (drawings #2013.1.001.0002-0009) | *VSM Technologies selected as manufactured company for BH drawings (drawings #2013.1.001.0002-0009) | ||
| + | |||
12/17/19 | 12/17/19 | ||
*BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together. | *BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together. | ||
| + | |||
12/18/19 | 12/18/19 | ||
| − | * | + | *Cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017) |
*PMMA_output/isolating_charging_line drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019) | *PMMA_output/isolating_charging_line drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019) | ||
| + | *Assembly drawing with cathode and anode submitted to Spielman for approving (drawing #2013.1.001.0020) | ||
| + | |||
12/19/13 | 12/19/13 | ||
*LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber | *LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber | ||
| + | *LESKER reduced 4-way cross drawing downloaded and incorporated into SolidWorks (assembly file Lesker_C-800_275\C-0800-275 reassembled) | ||
| + | *LESKER reduced 4-way cross redesigned to match our x-pinch driver (drawing file Lesker_C-800_275\LESKER_C-0800-275_REASSEMBLED) | ||
| + | |||
12/20/13 | 12/20/13 | ||
| − | *LESKER reduced 4-way cross redesigned and | + | *LESKER reduced 4-way cross redesigned (cuts and welds) to match our x-pinch facility (drawing LESKER C-0800-275 REASSEMBLED) |
| − | *The | + | *The assembly drawing with cathode/anode/cross have been created (drawing #2013.1.001.0010-0021) |
| − | ** | + | **Some changes to parts have been done to accomodate cross drawing: |
***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008); | ***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008); | ||
***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014); | ***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014); | ||
| + | *Drawing LESKER C-0800-275 REASSEMBLED and drawing #2013.1.001.0010-0021 submitted to Spielman for approving | ||
Revision as of 23:22, 20 December 2013
[go back]
12/10/13
- brick housing (BH) parts (steel/PMMA) drawings approved by Spielman (drawings #2013.1.001.0002-0009)
12/11/13
- VSM Technologies selected as manufactured company for BH drawings (drawings #2013.1.001.0002-0009)
12/17/19
- BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.
12/18/19
- Cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)
- PMMA_output/isolating_charging_line drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019)
- Assembly drawing with cathode and anode submitted to Spielman for approving (drawing #2013.1.001.0020)
12/19/13
- LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber
- LESKER reduced 4-way cross drawing downloaded and incorporated into SolidWorks (assembly file Lesker_C-800_275\C-0800-275 reassembled)
- LESKER reduced 4-way cross redesigned to match our x-pinch driver (drawing file Lesker_C-800_275\LESKER_C-0800-275_REASSEMBLED)
12/20/13
- LESKER reduced 4-way cross redesigned (cuts and welds) to match our x-pinch facility (drawing LESKER C-0800-275 REASSEMBLED)
- The assembly drawing with cathode/anode/cross have been created (drawing #2013.1.001.0010-0021)
- Some changes to parts have been done to accomodate cross drawing:
- 1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008);
- 2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014);
- Some changes to parts have been done to accomodate cross drawing:
- Drawing LESKER C-0800-275 REASSEMBLED and drawing #2013.1.001.0010-0021 submitted to Spielman for approving