Difference between revisions of "X-pinch driver 2-bricks fabrication"

From New IAC Wiki
Jump to navigation Jump to search
Line 22: Line 22:
 
*The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021)
 
*The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021)
 
**Al output plate changes:
 
**Al output plate changes:
 +
***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross(drawing ##2013.1.001.0010-0008);
 +
***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length;

Revision as of 23:09, 20 December 2013

[go back]


12/10/13

  • brick housing (BH) parts (steel/PMMA) drawings approved by Spielman (drawings #2013.1.001.0002-0009)

12/11/13

  • VSM Technologies selected as manufactured company for BH drawings (drawings #2013.1.001.0002-0009)

12/17/19

  • BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.

12/18/19

  • cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)

/PMMA_output/isolating_charging_line submitted to Spielman for approving (drawings #2013.1.001.0010-0017)

12/19/13

  • LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber

12/20/13

  • LESKER reduced 4-way cross redesigned and reassembled to match our x-pinch facility (drawing LESKER C-0800-275 REASSEMBLED) and submitted to Spielman for approving
  • The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021)
    • Al output plate changes:
      • 1) inner cut increased from 4.5 diameter to 10" diameter to match the cross(drawing ##2013.1.001.0010-0008);
      • 2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length;