Difference between revisions of "Wire Number Function"

From New IAC Wiki
Jump to navigation Jump to search
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
===Function for the wire number in the detector frame for change in <math>\phi</math> and constant <math>\theta</math> in the lab frame===
+
<center><math>\underline{\textbf{Navigation}}</math>
 +
 
 +
[[Function_for_change_in_x%27,_Lab_frame|<math>\vartriangleleft </math>]]
 +
[[VanWasshenova_Thesis#Determining_wire-theta_correspondence|<math>\triangle </math>]]
 +
[[In_the_Detector_Frame|<math>\vartriangleright </math>]]
 +
 
 +
</center>
 +
 
 +
 
 +
=Function for the wire number in the detector frame for change in <math>\phi</math> and constant <math>\theta</math> in the lab frame=
 
 
 
Using the expression for wire number n in terms of <math>\theta</math> for the detector mid-plane where <math>\phi=0</math>:
 
Using the expression for wire number n in terms of <math>\theta</math> for the detector mid-plane where <math>\phi=0</math>:
Line 59: Line 68:
  
  
<center><math>\frac{x_{n=1}}{sin 5.20988^{\circ}}=\frac{2.52934}{sin 109.79^{\circ}} \Rightarrow x_{n=1}=.2441</math></center>
+
<center><math>\frac{x_{n=1}}{sin 5.2311^{\circ}}=\frac{2.52934}{sin 109.7689^{\circ}} \Rightarrow x_{n=1}=.24505</math></center>
  
  
Line 66: Line 75:
  
  
<center><math>.2441-.01337=.2307=x_{n=0}</math></center>
+
<center><math>.24505-.01337=.23168=x_{n=0}</math></center>
  
  
 
Each wire becomes an equation of the form,
 
Each wire becomes an equation of the form,
  
<center><math>x_{wire\ n}'=tan(6^{\circ})y'+.2307+.01337\ n</math></center>
+
<center><math>x_{wire\ n}'=tan(6^{\circ})y'+.23168+.01337\ n</math></center>
  
 
This agrees with CED simulation
 
This agrees with CED simulation
Line 80: Line 89:
 
<center>[[File:DC_geom.png]]</center>
 
<center>[[File:DC_geom.png]]</center>
  
=[[VanWasshenova_Thesis#Wire_Number_Function|^Up]]=
 
=[[Function_for_change_in_x%27,_Lab_frame|<-Back]]=
 
  
=[[Mathematica_Simulation|Forward->]]=
+
----
 +
 
 +
 
 +
<center><math>\underline{\textbf{Navigation}}</math>
 +
 
 +
[[Function_for_change_in_x%27,_Lab_frame|<math>\vartriangleleft </math>]]
 +
[[VanWasshenova_Thesis#Determining_wire-theta_correspondence|<math>\triangle </math>]]
 +
[[In_the_Detector_Frame|<math>\vartriangleright </math>]]
 +
 
 +
</center>

Latest revision as of 20:29, 15 May 2018

[math]\underline{\textbf{Navigation}}[/math]

[math]\vartriangleleft [/math] [math]\triangle [/math] [math]\vartriangleright [/math]


Function for the wire number in the detector frame for change in [math]\phi[/math] and constant [math]\theta[/math] in the lab frame

Using the expression for wire number n in terms of [math]\theta[/math] for the detector mid-plane where [math]\phi=0[/math]:

[math]n = \frac{-957.412}{\tan(\theta)+2.14437}+430.626[/math]

We can use the inverse of this function to find the neighboring wire's corresponding angle theta

[math]\theta\equiv 4.49876 +0.293001 n+0.000679074 n^2-3.57132\times 10^{-6} n^3[/math]


[math]\theta(n \pm 1)\equiv 4.49876 +0.293001 (n \pm 1)+0.000679074 (n \pm 1)^2-3.57132\times 10^{-6} (n \pm 1)^3[/math]


We also know what the x' function must follow dependent on phi in the detector plane

[math]x_1^'=\frac{((x_{D2}-x_P)^2+(y_{D2}-y_P)^2+(z_{D2}-z_P)^2)-((x_P-x_{D1})^2+(y_P-y_{D1})^2+(z_P-z_{D1})^2)}{4ae}-ae[/math]


[math]x_1^'=\frac{(r_{D2}^2)-(r_{D1}^2)+cot^2(\theta)(r_{D2}^2-r_{D1}^2)-2x_P(x_{D2}-x_{D1})-2y_P(y_{D2}-y_{D1})-2z_P(z_{D2}-z_{D1})}{4ae}-ae[/math]


[math]x_{D1}=r_{D1}\ cos(\phi)\qquad y_{D1}=r_{D1}cos(\phi)\qquad z_{D1}=r_{D1} cot(\theta)[/math]


[math]x_{D2}=r_{D2} cos(\phi)\qquad y_{D2}=r_{D2} sin(\phi)\qquad z_{D2}=r_{D2} cot(\theta)[/math]


[math]x_P=\frac{2.53cos(\phi)}{(cot(\theta)+cos(\phi)cot(65^{\circ})}[/math]


[math]y_P=\frac{2.53sin(\phi)}{(cot(\theta)+cos(\phi)cot(65^{\circ})}[/math]


[math]z_P=\frac{2.53cot(\theta)}{(cot(\theta)+cos(\phi)cot(65^{\circ})}[/math]
[math]r_{D1}=R_{Lower\ Dandelin}cos(\theta)=(ae-\Delta a) tan(65^{\circ})cos(\theta)\qquad \qquad r_{D2}=R_{Lower\ Dandelin}cos(\theta)=(ae+\Delta a) tan(65^{\circ})cos(\theta)[/math]

We can take this point to be the x axis intercept and use the fact that each wire is titled by 6 degrees to the horizontal in the plane of the detector to create an equation

[math]x_{wire\ n}'=tan(6^{\circ})y'+x_{n_0}[/math]

where the initial wire and x' position at the given theta is represented by [math]n_0[/math]


This equation can be solved for a hypothetical wire 0, which will allow the wire number to be the multiplicative factor for the change from the starting position.


[math]\frac{x_{n=1}}{sin 5.2311^{\circ}}=\frac{2.52934}{sin 109.7689^{\circ}} \Rightarrow x_{n=1}=.24505[/math]


Since each wire is separated by .01337 meters


[math].24505-.01337=.23168=x_{n=0}[/math]


Each wire becomes an equation of the form,

[math]x_{wire\ n}'=tan(6^{\circ})y'+.23168+.01337\ n[/math]

This agrees with CED simulation



DC geom.png




[math]\underline{\textbf{Navigation}}[/math]

[math]\vartriangleleft [/math] [math]\triangle [/math] [math]\vartriangleright [/math]