Difference between revisions of "Using SEM Instructions"
Jump to navigation
Jump to search
(Created page with '1-Putting the sample with the paste face to the inside of the chamber. 2-Be sure that the breaker F6 is on for the pump. 3-A symbol for the chamber on the right bottom of the sof…') |
|||
| Line 1: | Line 1: | ||
| − | 1-Putting the sample with the paste face to the inside of the chamber. | + | 1- Putting the sample with the paste face to the inside of the chamber. |
| − | 2-Be sure that the breaker F6 is on for the pump. | + | |
| − | 3-A symbol for the chamber on the right bottom of the software layout shows a green color when the chamber is has a pressure of the 0.53 torr. | + | 2- Be sure that the breaker F6 is on for the pump. |
| + | |||
| + | 3- A symbol for the chamber on the right bottom of the software layout shows a green color when the chamber is has a pressure of the 0.53 torr. | ||
| + | |||
4- The beam spot is 4.5 works for the paste samples. the sot size changes depending on the sample and the resolution. | 4- The beam spot is 4.5 works for the paste samples. the sot size changes depending on the sample and the resolution. | ||
| + | |||
| + | 5- The height should be within 10 mm from the back scattered electron detector. | ||
| + | |||
| + | 6- Based on the sample element content, the brighter color for the heavier elements and dark one for the lighter ones. | ||
| + | |||
| + | =Control Buttons= | ||
| + | |||
| + | Ctrl+0 for centering the stage. | ||
| + | |||
| + | Middle button for the mouse to raise up the sample to the 10 mm level. | ||
Revision as of 16:57, 22 November 2011
1- Putting the sample with the paste face to the inside of the chamber.
2- Be sure that the breaker F6 is on for the pump.
3- A symbol for the chamber on the right bottom of the software layout shows a green color when the chamber is has a pressure of the 0.53 torr.
4- The beam spot is 4.5 works for the paste samples. the sot size changes depending on the sample and the resolution.
5- The height should be within 10 mm from the back scattered electron detector.
6- Based on the sample element content, the brighter color for the heavier elements and dark one for the lighter ones.
Control Buttons
Ctrl+0 for centering the stage.
Middle button for the mouse to raise up the sample to the 10 mm level.